Advanced Illumination - DL097 Medium Dome Light
- Rugged, cast aluminum housing has an outer diameter of 8.4” (213mm) and an inner, working diameter of 6.1” (155mm).
- The Medium Dome Light is available in a wide range of wavelengths including a 3 channel, RGB configuration.
- Provides up to 59kLux at a 1” (25mm) standoff.
Utilizing high power LEDs, the DL097 is engineered to provide class-leading intensity for medium size target area coverage.
As is typical for all hemispherical dome lights, the DL097 is best suited for inspection on curved surfaces where even illumination is necessary to avoid hot-spot reflections.
Similarly to the smaller DL194, the DL097 is available in wide range of visible and NIR wavelengths, including an RGB option that is designed to operate with Advanced illumination’s multi-channel current source controllers.
General Specs
|
Category |
Specification |
Detail |
|||
|
Optical |
Available Wavelengths |
White, 455 nm, 470 nm, 505 nm, 530 nm, 590 nm, 625 nm, 660 nm, 730 nm, 850 nm, 940 nm |
|||
|
Available Lensing |
No Lenses |
||||
|
Available Light Conditioning |
None |
||||
|
Electrical |
Power Consumption Info |
Refer to Datasheet for Details |
|||
|
Cable Info |
80" -0/+6" Long (2 m -0/+150 mm), 105°C Rated, Foil Shield w/ Drain |
||||
|
Mechanical |
Sizing Info | Standard | Diameter | 8.44" (214.3 mm) | Refer to Datasheet for Details |
| Height | 4.14" (105.2 mm) | ||||
|
Weight Info (Standard) |
~ 3.02 lbs (~1369 g) per Unit |
||||
|
Mounting Info |
M6 Mounting Holes |
||||
|
Material Info |
Die Cast Aluminum Housing, PVC Cable Jacket, Steel Black Oxide Fasteners |
||||
|
Thermal |
Operating Case Temperatures |
25°C to 60°C |
|||
|
Operating Ambient Temperatures |
0°C to 35°C |
||||
|
Certification |
Compliance |
CE, RoHS, IEC 62471 |
|||
|
IP Rating |
Not Rated |
||||
|
Lumen Maintenance - White Only |
L70 (50,000 Hours) |
||||
Part Number Key
More Product Information
- Guaranteed performance to 43.5 GHz with Extended K™ ports
- High output power allows measurement of high attenuation devices
- Advanced time domain option provides tools for signal integrity analysis
- Wide dynamic range enables measurement of very low reflection artifacts
- Excellent corrected directivity minimizes measurement uncertainty
- SmartCal™ auto calibration unit reduces calibration and setup time
- Time domain with time gating option grants easier and faster fault identification
- Modern LAN interface for remote control is faster than GPIB
- A common GUI and SCPI interface within the ShockLine family
- Bias tee option simplifies test setups where the DUT needs DC biasing
- Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
- E-Band VNA
- Extended frequency range covering E-band and major parts of V band
- Fully assembled test system eliminates setup errors and increases reliability
- Tethered modules connect directly to the DUT increasing measurement stability
The high frequency reed switch series is engineered for precision switching in RF and high-speed digital applications. These switches are optimized to handle signals from DC up to 7 GHz, making them ideal for use in telecommunications, computing, and advanced test equipment.
With nickel/iron leads offering high magnetic permeability, these reed switches deliver exceptional linearity across a broad frequency spectrum. Their compact form factor allows for high-density PCB mounting, and internal shielding ensures minimal electromagnetic interference, even in tightly stacked configurations.
These switches are commonly integrated into high-frequency reed relays for enhanced durability and performance.
- High dispersion for reflective surfaces and shorter working distances.
- Provides a narrower and less intense illumination area than the AL116.
- IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
- Available with polarization and diffusion light conditioning.
- This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 40″.
- The DF241 is characterized as a Small Low Angle Dark Field ring light.
- Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
- A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator.
- With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view.
- A 25mm field of view is standard with an optional field of view of 35mm.
- Available in a range of wavelengths from UV to IR.
*Engineered to provide comparable optical characteristics to our previous RL1360.
-
The BL2 Series provides a highly uniform and high intensity, diffuse backlight source, primarily used for creating object silhouettes of high contrast or imaging through semi-translucent materials.
-
BL2 Backlights are pre-engineered for scalability, allowing for size configurations in 1″ increments up to 46″ in length and width.
-
This Backlight series is offered in 5 wavelength options and can be configured with either a polarization or collimation film.
-
As with all Advanced illumination products, this series is built for tailor ability while still maintaining a standard lead time of one to three weeks.
-
Each side of a BL2 is equipped with M6 nut channels, allowing for quick and easy mounting. This series comes with our LB111 Mounting Brackets.
Sanyu reed relays deliver high-performance switching solutions ideal for Automated Test Equipment (ATE) and high-frequency applications. Engineered with compact, low-power reed technology, they offer fast switching speeds, low insertion loss, high isolation, and exceptional reliability. Backed by the Japanese precision, each relay undergoes advanced environmental testing and 100% ATE verification. With low contact resistance, wide bandwidth, and minimal capacitance, Sanyu Reed relays are trusted by design engineering and manufacturing experts worldwide.
Specialized relays for ultra-high voltage applications exceeding 1.5kV. Ideal for isolation in medical devices, renewable energy systems, and advanced industrial equipment.
- This High Intensity Spot Light is engineered for long throw and high brightness illumination.
- Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm.
- Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm).
- Available in a wide range of wavelengths.
- The IC Inline Controller provides steady and optimal current to lights from a small package when larger, more versatile discrete controllers are not necessary.
- The IC provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming.
- All ICS models employ reverse input polarity protection.
- A wash down version is provided with any light to which it is attached is also wash down.
- 0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.
Advanced Illumination
Machine Vision Lighting Solutions
