VisioCablePro - VCPEx-Stativ Measuring Device for Extrusion Tools Stand
- Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter
- Automated measurement process
- Focus indicator allows you to easily adjust the focus
- Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured
- The influence of the user is reduced to a minimum
- Robust, ergonomic design
- Ideal addition to the 2-camera system VCPEx+
Stand-alone system for high-precision and fast measurement large wire guides and extrusion nozzles
Ensure your product quality right from the beginning - even before the production process.
Possible measurement results
Maximum, minimum and average inner diameter(In this way, deformations or wear and tear of the tools can be detected - in order to avoid undefined over extrusion or undercutting of the wall thickness.)
Area of application & benefits:
- Replaces inaccurate measurement methods (calipers, tactile measurements, etc.) with an automated measurement method
- The VCPEx+ Stand is a camera-based system for measuring large wire guides and dies
- Specially designed for use in production, the tool handout and the laboratory
- Reliable, fast and accurate quality control
- Traceability of results for convenient presentation of the life cycle of your tools
- Time and cost savings for your measurement
|
Technical Details |
|
|---|---|
|
Size (W x L x H) |
400 x 460 x 630 mm 15.75 x 18.11 x 24.80 Inch |
|
Weight |
15 kg 33.1 lbs |
|
Supply Voltage |
100 - 240 V 50 - 60 Hz |
|
Input Power |
max. 100 Watts |
|
Resolution |
corresponds to 0.1% of the image field |
|
Lighting |
homogeneous lighting by LUMIMAX® |
|
Camera* |
one measurement area, configurable |
|
Measuring range |
up to 35 mm (1.37“) hole diameter |
More Product Information
- Device is according to the standard IEC 60811 -501, -507 (Heat elongation test, tensile test)
- Handy, electric device for material tests in laboratories
- Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”)
- Especially for hard materials
- Standard-compliant, fully automated measurement
- Your guarantee for secure quality testing of geometrical attributes of cables, isolated conductors and hosepipes
- Excellent traceability and repeatability
- Reliable evaluation of obtained measuring results
- Intuitive operation – designed for use directly next to the extrusion line
- Operation possible without training – highly complex in the background – but easy, safe and quick to use
- All measurements are performed with image processing algorithms of the latest generation
- Modularly expandable (database interfaces, special geometries/shapes …)
- Clear, individually configurable and comprehensive result display
- The report design can be modified on an Excel basis
- Quick and efficient cut
- Thin, evenly and parallel cut samples with a smooth surface
- Very robust device made of aluminum and stainless steel - no corrosion
- By using special chuck jaws it is even possible to cut larger samples with an outer diameter up to 200 mm (7.87“)
- Light to illuminate the cutting process
- Precise and repeatable measuring results possible with the cut samples
- Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter
- Automated measurement process
- Focus indicator allows you to easily adjust the focus
- Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured
- The influence of the user is reduced to a minimum
- Robust, ergonomic design
- Ideal addition to the 2-camera system VCPEx+
- Sample preparation according to IEC 60811
- Sample cutting device for cutting very small samples up to 3.5 mm (0.14“) outer diameter depending on material and wall thickness
- Easy and fast operation
- Robust, compact device out of stainless steel - no corrosion
- 4 different adapters to stabilize the samples
- On request more adapters of different sizes available - Product No.: 402.0007.13
- Cutting block SB 18 - The cutting base can be rotated 4 times and is exchangeable always an optimal cutting base
- Cutting knife - With special blades for an optimal cutting of the cable samples
- Special blades - These blades are especially developed for cable preparation
- Cable strippers - Different sizes
- Device and operation are according to the standard IEC 60811-506 (IEC 60811-1-4) point 8.5
- Case set offers all required weights for the test
- Easy operation
- Very robust and solid construction
- Steel impact piece included
- Up to 3 Samples can be tested simultaneously
- Device suitable for positioning in a cold chamber - Product No.: 402.0020.02
- Object size / measuring range up to 130 mm (5.11“) (larger customizations are possible)
- Quick and very easy measurement
- Little training required (without a customer specified database an initial operating instruction takes only 15 min)
- Suitable software: VELOX (measuring software), ProCable3 (CAQ system)
- Various external CAQ software are connectable (CIQ-AESA, ADVARIS, QDA-ASI-DATAMYTE, QUASAR, etc.)
- No user influence on default optical focus as well as default optimized, intelligent and homogeneous lighting
- Shock and vibration resistant due to an optimized sensor arrangement and balanced weight distribution
- Quick and very precise measurements due to the robust construction and easy operation
- Measuring software enables various operator level settings (production, laboratory, administrator, service, etc.)
- Standardized individual components lead to supply security and therefore a short delivery period
- Easy connection with external devices
- Preparation of cable samples for further processing
- Applicable for cable types with solid core cross-sections
- E.g. Sample preparation for cutting with ORC family
VisioCablePro
VisioCablePro® is a brand of iiM GmbH - by Exaktera.
VisioCablePro® - Cable measurement engineering has especially been developed to carry out geometrical measurements, which specifically fulfill cable producers requirements to measure the geometrical features of insulating skins and cable sheaths.
Contact Details
iiM GmbH - VisioCablePro
Neuer Friedberg 5, 98527 Suhl, Germany
Phone: +49 3681 / 455 19-0
Email: info@iimag.de
