• Designed for Harsh Environments: – 50°C / +105°C, Waterproof, Shocks, Vibration, Lightning, EMI/EMC
• Ultra Compact: Generic analog module, 2×3’’ / 51×76 mm, from 1 to 16 modules per stack
• Best Data Ever: 500 ppm in extreme temperature range
• Easy to Configure: eZ software Suite, XML schema (MDL)
• INET Ready: UDP communication, IEEEE1588 synchronization, SNMP
• Multi Format Output Stream: PCM Chapter 4, Chapter 7, Chapter 10, UDP, IENA, DAR

• IEC 61000-4-4 Ed.3 standard compliance. 
• Pre-check function is installed. Inspection before testing is now easy. 
• Normal mode test support. Taking account of field troubles is possible. (option) 
• Utilize an outlet box that simplifies EUT connection. (option) 
• Compared with conventional products, the size has become compact. (Approximately 67% by volume) 
• Easy to understand Panel display reduces mistakes in connecting power cables. 
• Software control with Windows. (option) 
• Next calibration date can be notified. (Windows software only) 
• Employ LCD screen with multi-language support and enhanced operability. 
• Maximum output voltage of 5 kV and maximum pulse frequency of 2 MHz allow you to test above the standard test level. 
• CDN capacity is increased to single phase type AC 240 V 20 A, single and three phase type to AC 600 V 63 A, supporting wider range of EUT. 
• Large capacity CDN (100 A or 150 A) option available for Injection test on various EUT. 
• Using coupling clamps, EMS probe kits, you can test the signal lines and evaluate the noise immunity on the PCB. (option)

Simulator to reproduce various transient surge phenomena which are generated in a vehicle and required in the international standard ISO-7637-2 (2004) Standard, and evaluate the immune resistibility of the equipped electronics devices against the surge. 

• ISO 7637-2 (2004) Standard compliant simulator 
• Correspondent to the test for 12V/24V/42V systems in a vehicle 
• Stand-alone usage per the each generator unit possible as well as the comprehensive control 
• Large capacity CDN (60V/50A) available (Option) 
• Up to 200A power supply possible (Option) 
• Windows in Japanese applicable for the software program as well

_{Private standards or specifications by manufactures can be responded upon request.}

• 96 digital lines configurable as either input or output
• Five available power supply rails for custom designs
• Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
• VXIplug&play driver simplifies software development
• On-board connector header for simplifed migration to PCB implementation 
• Access to 16 MHz clock for use in complex designs
• Multiple front panel connector options

• High-density, compact (1U) precision data acquisition instruments 
• LXI™ LAN connectivity 
• Fully integrated signal conditioning maximizes performance and accuracy 
• Easily integrate thermocouples, voltages, RTDs, thermistors, frequency, strain and pressure on an per-channel basis 
• Distributed, synchronized measurements over the wire 
• Scalable architecture easily expands from tens to thousands of channels 
• DC version available for test cells requiring closer proximity to test article 
• End-to-end self-calibration ensures optimum runtime performance 
• Web-based access for monitoring and control 
• Exlab turnkey software for simplified setup, control and data display

• Guaranteed performance to 43.5 GHz with Extended K™ ports
• High output power allows measurement of high attenuation devices
• Wide dynamic range enables measurement of very low reflection artifacts
• Excellent corrected directivity minimizes measurement uncertainty
• SmartCal™ auto calibration unit reduces calibration and setup time
• Time domain with time gating option grants easier and faster fault identification
• Modern LAN interface for remote control is faster than GPIB
• A common GUI and SCPI interface within the ShockLine family
• Bias tee option simplifies test setups where the DUT needs DC biasing
• Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
• E-Band VNA
  • Extended frequency range covering E-band and major parts of V band
  • Fully assembled test system eliminates setup errors and increases reliability
  • Tethered modules connect directly to the DUT increasing measurement stability

• Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter 
• Automated measurement process 
• Focus indicator allows you to easily adjust the focus 
• Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured 
• The influence of the user is reduced to a minimum 
• Robust, ergonomic design 
• Ideal addition to the 2-camera system VCPEx+

• Device is according to the standard IEC 60811 -501, -507 (heat elongation test, tensile test)
• The samples are taken from the inner side of the sheath and isolator
• All grooves and/or conductive layers are removed
• Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”)

• Measuring device to detect the twist/lay/pitch length of sheathed cables
• Measurements according to the standards LV212 und LV122
• The twist length of the sample is measured without removing the sheath → this ensures a precise measurement
• Traditional methods manipulate the sample (cable stripping or unwinding of conductors) → a precise measurement is not possible anymore
• Via a PC connection, the measuring results can directly be exported
• Fully automatic: By clicking one button, the measuring sensor automatically moves along the sample