You design the future. We help you make it happen.
VisioCablePro - Cold Bend Test CBT
- Device and operation according to the standard IEC 60811-504
- The complete set consists of various winding spindles and cable guides for various diameters: Winding spindles: 10, 12, 14.5, 18, 22, 27, 33.5, 41, 50 mm | 0.4, 0.5, 0.57, 0.7, 0.86, 1.06, 1.32, 1.61, 1.96 Inch outer diameter; Cable guides: 3.2, 4, 5, 6.2, 7.7, 9.6, 12, 15 mm | 0.12, 0.15, 0.19, 0.24, 0.30, 0.38, 0.5, 0.59 Inch inner diameter
- The winding spindles and cable guides interlock easily and are easily fastened
- Maneuver Ratio: 5/1: 5x Crank rotation = 1x spindle rotation
- Spindle/Guide diameter ratio: 0.8x sample diameter
- Device suitable for positioning in a cold chamber - Product No.: 402.0020.04
|
Technical Details |
|
|---|---|
|
Size (W x L x H) |
470 x 280 x 200 mm 18.5 x 11.0 x 7.9 Inch |
|
Weight |
Device: 7.1 kg | 15.7 lbs; Accessories: 14 kg | 30.8 lbs |
|
Material |
Stainless steel |
|
Standard reference |
IEC 60811-504 |
More Product Information
- Calibration scale 0.5 - 12 mm (0.02 to 0.5“) polygon
- 9 different circles from 0.5 to 12.0 mm outer diameter (0.02 to 0.5“)
- Distance measurements are possible with the polygonal inner shape→ Available with DAkkS- or factory calibration certificate
- Calibration scale 20 / 60 mm (0.8 / 2.4“) polygon
- 2 different circles (20 / 60 mm (0.8 / 2.4“) outer diameter)
- Distance measurements are possible with the polygonal inner shape
- Available with DAkkS- or factory calibration certificate
- Calibration rings 65 / 95 mm (2.5 / 3.7“)
- 2 different circles (65 / 95 mm (2.5 / 3.7“) outer diameter)
- Available with DAkkS- or factory calibration certificate
- Calibration case - practical storage of calibration scales
- Vacuum pump to pick up small cable samples
- Suitable for the cable measuring device VCPLab and the cable o ring cutter ORC Micro
- Device is according to the standard IEC 60811 -501, -507 (Heat elongation test, tensile test)
- Handy, electric device for material tests in laboratories
- Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”)
- Especially for hard materials
- Robust case seals against extraneous light
- Central control unit
- Semi-automatic focussing and illumination
- Safe from impacts and vibrations
- Quasi shadow free transmitted light
- Optimal system status for lighting, optics and camera
- A measurement with 2 cameras is possible
- Adjustable operation distance for 2D measurements in laboratories
- Very precise measurement due to high resolution sensors
- Standardised individual components
- Very easy measuring procedure
- Suitable software VELOX and CAQ-System ProCable available
- Cutting block SB 18 - The cutting base can be rotated 4 times and is exchangeable always an optimal cutting base
- Cutting knife - With special blades for an optimal cutting of the cable samples
- Special blades - These blades are especially developed for cable preparation
- Cable strippers - Different sizes
- Device and operation according to the standard IEC 60811-504
- The complete set consists of various winding spindles and cable guides for various diameters: Winding spindles: 10, 12, 14.5, 18, 22, 27, 33.5, 41, 50 mm | 0.4, 0.5, 0.57, 0.7, 0.86, 1.06, 1.32, 1.61, 1.96 Inch outer diameter; Cable guides: 3.2, 4, 5, 6.2, 7.7, 9.6, 12, 15 mm | 0.12, 0.15, 0.19, 0.24, 0.30, 0.38, 0.5, 0.59 Inch inner diameter
- The winding spindles and cable guides interlock easily and are easily fastened
- Maneuver Ratio: 5/1: 5x Crank rotation = 1x spindle rotation
- Spindle/Guide diameter ratio: 0.8x sample diameter
- Device suitable for positioning in a cold chamber - Product No.: 402.0020.04
- Ideal cutting results
- Improved sample quality through an exact and reproducible sample thickness
- Suitable for a wide variety of materials
- Robust and durable blade with double wear time (2-sided usable)
- Exact adjustment of the rotating speed
- The influence of the operator is minimized by the predefined blade feed
- Fine, manual dosing of the progressive feed
- Easy exchange of the wire grips possible, with standard tooling
- Intelligent control electronics ensure an intuitive and safe operation
- Device is according to the standard IEC 60811 -501, -507 (heat elongation test, tensile test)
- The samples are taken from the inner side of the sheath and isolator
- All grooves and/or conductive layers are removed
- Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”)
- Motorized device for removing extruded sheaths
- No damage to underlying materials (shielding braid, tape, cores, wires, etc.)
- Easy positioning between winding and unwinding systems
- Reproducible and easily adjustable working depth of the blade
- Signal light as status display
- Emergency stop function for winding and unwinding systems possible via control circuit
- Automatic synchronization of the haul-off speed
- High operational stability thanks to robust construction
VisioCablePro
VisioCablePro® is a brand of iiM GmbH - by Exaktera.
VisioCablePro® - Cable measurement engineering has especially been developed to carry out geometrical measurements, which specifically fulfill cable producers requirements to measure the geometrical features of insulating skins and cable sheaths.
Contact Details
iiM GmbH - VisioCablePro
Neuer Friedberg 5, 98527 Suhl, Germany
Phone: +49 3681 / 455 19-0
Email: info@iimag.de
