-
Pre-Engineered Scalability Enables Customized Emitting Lengths in 2″ Increments to 20″
-
Intense, Diffuse Lighting with 226 kLux at Emitting Surface
-
Multiple Available Wavelengths, Including Visible Monochromatics, Infrared, and White
-
Available Washdown Option for Difficult Environments
-
Can be Applied in Backlighting or Diffuse Front Lighting Geometries
Junkosha - 0 Series Cables - Precision Test Grade Phase Stability
- Superior phase stability against bending and temperature fluctuations makes this cable assembly perfect as a vector network analyzer connector for measurement.
- Continuous operation temperature range: -30 to +85°C.
- 7 cables with different maximum usage frequencies (26.5 GHz, 50 GHz, 67 GHz, 70 GHz, 110 GHz, 120 GHz and 145 GHz) are available.
|
Cable type |
Maximum Operating Frequency |
Typical insertion loss (dB/m) |
Cable Outer Diameter (mm) |
Mass (g/m) |
Continuous operating temperature (°C) |
Assembly length (mm) |
||
|---|---|---|---|---|---|---|---|---|
|
@18.5GHz |
@Maximum frequency |
Min |
Max |
|||||
|
MWX021 |
26.5GHz |
1.6 |
2.0 |
8.5 |
122 |
-30~＋85 |
700 |
1500 |
|
MWX051 |
50.0GHz |
2.7 |
4.6 |
6.6 |
76 |
700 |
1500 |
|
|
MWX061 |
67.0GHz |
3.5 |
7.3 |
6.6 |
73 |
700 |
1500 |
|
|
MWX071 |
70.0GHz |
3.5 |
7.5 |
6.6 |
73 |
700 |
1500 |
|
|
MWX001 |
110.0GHz |
4.2 |
11.8 |
4.0 |
50 |
100 |
200 |
|
|
MWX002 |
120.0GHz |
5.0 |
14.5 |
4.0 |
50 |
100 |
200 |
|
|
MWX004 |
145.0GHz |
5.0 |
28.1 |
4.0 |
50 |
100 |
200 |
|
This table provides standard length availability within our catalog. Junkosha can provide custom lengths upon request; please contact Junkosha to discuss.
Features
- Thin and flexible
- Junkosha has a lineup of coaxial cables with Time Delay of 3.6ns/m and 3.8ns/m and Velocity of Propagation of 77-79%
Use
- Vector network analyzers
- RF and high-speed digital testing devices
MWX021 Static Bending Test
- Measure by Winding the Test Cable 360 ° Around A φ60 mm
-
Mandrel * 26.5 GHz Guaranteed Value within ± 5.7 °
MWX021 Temperature-Phase Data
- Increase the Temperature of the Test Cable in Steps of -30 ° C to 20 ° C and Measure for Each Frequency (Leaving Time at Each Temperature is 1 Hour)
How to Use "Safety Lock Mechanism" of 1.0 mm(m) Connector
Option: Non-Armor Type
- Non-Armor Type is available in MWX051 (2.4 mm & 2.92 mm) & MWX061 (1.85 mm) for Wafer Probe Station.
Document
More Product Information
High density switch matrix models in 1 wire and 2 wire configurations
The LXI mainframes family includes 2-slot, half-rack LXI switching and data acquisition mainframes (EX1202/EX1262), 16-slot, 3U LXI switching and data acquisition mainframes (EX1208A and EX1208B, pictured), and 6-slot, 1U LXI switching and data acquisition mainframes (EX1206A).
- Calibration-grade metrology standards
- Used for VNA calibration and/or calibration validation
A precision fixed termination (or load) consists of an immovable, (fixed) termination which, when mated to the end of a trans-mission line or cable, absorbs nearly all of the signal energy traveling toward it. An ideal “matched” condition exists when a termination with an impedance value of Z0, is connected to the end of a transmission line or cable that also has a characteristic impedance of Z0. Such an ideal “matched” condition (one with no mismatch between the termination and its mated line or cable) is critical if a voltage standing wave ratio (VSWR) of 1.0:1 is to be achieved in a system with a 50 or 75 ohm impedance value. Simply put, the more closely the 1.0:1 ratio is approached, the more accurate the measurements that can be made from a system.
- Calibration-grade metrology standards
- Used for VNA calibration and/or calibration validation
Fixed flush and fixed offset short circuit terminations (shorts) are used to establish reference planes in transmission systems and as key elements in the calibration of vector network analyzers (VNAs). Offset shorts can be used for banded calibrations of VNA. Those with the longest offset are often used to evaluate the calibration effectiveness of a VNA by measuring the effective source match after calibration.
- Eight channel, universal, 2-/4-wire RTD simulator
- Fast, monotonic, glitch-free resistance value programming
- Suitable for simulating resistors, platinum/copper/nickel RTDs
- Suitable for pulsed and continuous excitation inputs
- Direct temperature value programming
- Extensive triggering capability
- Synchronize level changes with input measurements to facilitate test sequencing
- AWGN as high as +13 dBm
- Bandwidths up to 18 GHz
- Bandwidth, output power, and flatness can be modified for specific applications
- TTL controlled attenuation
The NC1000 Series amplified noise modules produce AWGN as high as +13 dBm, and have bandwidths up to 18 GHz. The high power modules are designed to test noise immunity for Cable TV equipment, secure communication channels, and military jamming systems. The lower power modules, <= 0 dBm, are random jitter sources for many applications including, PCIexpress, Infiniband, and 10 GigE. The Bandwidth, output power, and flatness can be modified for specific applications. A newly developed TTL controlled attenuation feature is also available.
Junkosha, Inc.
Website
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
