-
Characterized as a Dual Function Ring Light, the RL5064 is capable of both bright and dark field illumination with independent control (depending on control option).
-
A wide variety of wavelengths may be specified from UV to IR.
-
The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional 3 point mounting barrel.
Elgar - ReFlex Power Chassis
- Modular
- Control up to 95 assets
- Control multiple AC and DC power supplies and loads in one mainframe
- Create “virtual assets”
- Web browser control
- User configurable
- Highest Power Density
- Simple integration
- PFC
- Universal AC/DC input
- Up to 6kW in one mainframe
- 1kW DC modules
- PFC ≥0.95
- Reduced space and logistics hassles
- High power density
- Handles DC and AC power and load modules
- User configurable
- Universal AC/DC input
- Ease of integration
- Web browser control
- Trigger bus
- Configure modules to parallel or series operation “on the fly”
ReFlex Power™ is a high density, modular programmable power system providing DC, AC and electronic load assets all under control of a single controller. It provides a reconfigurable, flexible platform ideal for ATE and production test environments where RFP™ can provide programmable stimulus and bias power as well as programmable loads for the device(s) under test. The EIA 4U high RFP™ mainframe can hold up to 12 single-slot modules or combinations of single, dual and triple slot wide modules to configure (or reconfigure) the system for the particular requirements at hand. The mainframe can support up to 6 kW of output power.
Up to 8 mainframes, potentially up to 95 modules, can be controlled via a single controller. The controller communicates to the individual modules via a high speed proprietary bus protocol, providing very high data rates and a high degree of deterministic control. The RFP™ controller communicates to the host controller via an Ethernet LAN connection designed to be compliant with the LAN Extension for Instrumentation ( ™ ) standard, assuring interoperability and ease of integration. RFP™ system modules can be combined via the controller, permitting the creation of “virtual assets” with the voltage/current combinations required for a particular test regime. Creating “virtual assets” reduces the “logistical tail” and total cost of ownership.
Available power modules include
- Single slot, 330 Watt programmable DC supplies
- 16V, 20.6A
- 65V, 5.1A
- Dual slot, 1kW programmable DC supplies
- 33V, 30A
- 50V, 20A
- 50V, 25A
- 120V, 8.3A
- 450V, 2.3
- Triple slot, 875 VA, single phase, programmable AC supply
- Dual range: 280V(rms), 3.5A(rms)
- Dual Range: 140V(rms), 7A(rms)
- Triple slot, 500V, programmable electronic DC loads
- 15A, 375 Watt
- 30A, 750 Watt
The mainframe provides internal power distribution, cabling, I/O and power connection and rack mounting for 12-asset slots. The mainframe also supplies the signal and control bus fabric supporting multi-module series/parallel operation, complex triggering, fault I/O and inter-mainframe control infrastructure.
|
Input |
|
|---|---|
|
Universal Input |
AC 1 phase:115/120/200/208/230V ±10% AC 3 phase: 115/200 or 120/208V ±10% delta and wye AC 3 phase: 230/400V ±10% wye – neutral AC Voltage Range: 103.5V to 253V DC Voltage Range: 210V to 300V (314V for 2 sec.) Power Factor: ≥0.95 |
|
Frequency Range |
47Hz to 63Hz, DC |
|
Input Connector |
Amphenol, DL3102A24-10P or Phoneix style |
|
Mating Connector |
Amphenol, DL3106A24-10P |
|
Common |
|
|---|---|
|
Module Interface Backplane |
Slot Positions: 12 slots Multi-module control interface |
|
Configuration Guidelines |
Up to 8 Chassis may be interconnected. Paralleled AC, DC and Load modules must be in adjacent slots and be like modules. AC modules to be configured for multi-phase operation must be in adjacent slots. |
|
Regulatory |
Certified to UL 61010-1, CSA C22.2 No. 61010.1 and IEC/EN 61010-1. Compliance with EN61326 and FCC 21 CFR, Subpart J CE Mark is to EMC and LVD All specifications are subject to change |
|
Environment - Common |
|
|---|---|
|
Operating Temperature |
-10° C to 50° C Extended operating range available |
|
Storage Temperature |
-40° C to 70 °C |
|
Operating Humidity Range |
95%, non-condensating |
|
Altitude |
up to 2,000 M Extended operating range available |
|
Shock and Vibration |
Class 3 Mil-PRF-28800F |
|
Physical |
|
|---|---|
|
Dimensions |
EIA RS-310 rack mount : Wide 7” (177.8mm) (4U) : High 17”(432 mm) : Depth |
|
Weight |
11.4 lbs - Mainframe |
|
Rack Mount |
RETMA brackets |
|
Cooling |
Modules have integral fan cooling |
|
Physical : Module Sizes |
|
|---|---|
|
Dimensions Single Slot |
1.4” (35.6mm) W 6.75” (171.5mm) H 15” (381 mm) D |
|
Dimensions Dual Slot |
2.8” (71.1) W 6.75” (171.5mm) H 15” (381 mm) D |
|
Dimensions Triple Slot |
4.2” (106.7mm) W 6.75” (171.5mm) H 15” (381 mm) D |
Document
More Product Information
- All-in-one microstage - no separate controller
- Direct high-level command interface (I2C or SPI)
- USB adapter enables direct connection to PC
- Small: < 32x32x11 mm including controller
- Absolute encoding: high repeatability, no homing
- Low power: 6 VDC, ~5 W (only when moving)
- For integration into battery powered devices
- Long stroke: 15 mm
- High force: 1 N (~100g load vertical, ~200g horizontal)
- High stiffness with crossed roller bearing design
-
High performance GigE Vision InGaAs SWIR camera
-
QVGA resolution
-
Power over Ethernet
-
no condensation
-
efficient cooling with fan
-
Nitrogen-filled cooling chamber to avoid condensation
-
Up to 344 fps at full resolution
-
GigE Vision interface with PoE
-
Comprehensive I/O control options
-
Automated on-board image correction
-
TEC1 sensor-cooling
-
Extended operating temperature range
Battery cable to power the Back-to-Back Test Bench for autonomous operation via our FRIWO Battery Pack.
Fully Integrated: With the ProBus™ interface, the AP033 becomes an integral part of the oscilloscope. The probe sensitivity and offset can be controlled from the oscilloscope front panel, the probe front panel, or by using remote control commands (GPIB or RS-232). Sensitivity, offset, input capacitance, and common mode voltage range are displayed on the oscilloscope screen. When used with a LeCroy digital oscilloscope, no external power supply is required.
- Broadest Model Selection: 6kW, 9kW, 12kW, 18kW, 24kW, 36kW, Additional standard models above 36kW, up to 250kW, are available.
- Standard 60V, 120V, 400V, 600V, 800V and 1000V Voltage Ratings
- PLW Models Offer Ultra-compact Footprint and Boasts one of the industry’s highest power densities, 18kW in 2U.
- Anti-condensation: Intelligent Fully-integrated Temperature Control Circuit and Solenoid Valve
- Standard LabWindows and LabVIEW Drivers and SCPI Command Set
- RoHS Compliant
- Industry Leading Power Density – Up to 1700 Watts in 1U
- Standard Digital Interfaces – USB&RS232/485
- LXI Ethernet and Isolated analog interfaces
- Power Factor Correction-PFC and universal AC input
- “Green” Sleep Mode – Automatically “sleeps” after period of non-use
- Built in sequencing - Unload your system controller
- Programmable fold-back protection delay
-
Versatile 9.2 megapixel camera
-
10.1 fps at full resolution
-
Power over Ethernet option
-
Video-iris lens control
-
Monochrome (G-917B) and color (G-917C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
-
Universal input switching supply
-
24v regulated current DC – runs on 110-220v AC
-
Power indicator light
-
Tinned leads; marked negative/positive with wire nuts for easy connection
AMETEK Programmable Power
Located in San Diego, California, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well-known and respected Sorensen, Elgar, and California Instruments brands. AMETEK Programmable Power’s products serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
VTI Instruments provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time.
With strong brands, a broad product portfolio, exceptional precision power conversion and control expertise, proven power system integration capabilities and deep applications knowledge, AMETEK Programmable Power is your source for programmable power supplies, precision data acquisition instruments, and more.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
