VisioCablePro - CSM 2.0 Inline Cable Stripping Machine
- Motorized device for removing extruded sheaths
- No damage to underlying materials (shielding braid, tape, cores, wires, etc.)
- Easy positioning between winding and unwinding systems
- Reproducible and easily adjustable working depth of the blade
- Signal light as status display
- Emergency stop function for winding and unwinding systems possible via control circuit
- Automatic synchronization of the haul-off speed
- High operational stability thanks to robust construction
|
Specifications |
|
|---|---|
|
Size (W x L x H) |
1200 × 800 × 1250 mm 47.24 x 31.5 x 49.21 Inch |
|
Weight |
134 kg / 295 lbs (165 kg / 364 lbs incl. packaging) |
|
Material |
Aluminum, stainless steel, PVC |
|
Supply Voltage |
230 V / 50 - 60 Hz |
|
Input Power |
max. 750 Watts |
|
Cable diameter |
6 - 50 mm (flexible cable) |
|
Thickness of the insulation layer |
0,2 - 5 mm (0.008 - 0.196 Inch) (Depending on the hardness of the material) |
|
Speed |
max. 20lm/min |
|
Suitable materials |
PVC, PU, PE, LDPE, HDPE, FRNC, LSNH |
Document
More Product Information
Image optimization features:
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 10 µs to 26.8 s)
-
Auto white balance (GT1910C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT1910C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
Camera control features:
-
P-Iris and DC-Iris lens control
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
- Image circle: 62.5 mm - 82 mm
- High resolution down to 5µm pixel size
- Optimized for specific magnifications
- 6 magnifications available: 0.1x - 2.0x
- Version with beamsplitter available
- Best azimuth marking
- V48-Mount for easy installation
- Sample preparation according to IEC 60811
- Sample cutting device for cutting very small samples up to 3.5 mm (0.14“) outer diameter depending on material and wall thickness
- Easy and fast operation
- Robust, compact device out of stainless steel - no corrosion
- 4 different adapters to stabilize the samples
- On request more adapters of different sizes available - Product No.: 402.0007.13
- Easy separation of cable jackets from the electrical conductor
- Suitable for samples with a high strip force
- Also designed for larger sample outer diameters (depending on wall thickness)
- Suitable preparation before cutting cable samples for measuring (e.g. with the ORC-series)
- Robust, stable construction
- Easy to use
- Supports PCI Express Rev 2.0 x4 or higher, backwards compatible with PCIe Rev 1.10 slots
- Up to 512MB of high-speed image memory
- Single slot solution with reconfigurable camera control and general purpose input/outputs
- Vacuum pump to pick up small cable samples
- Suitable for the cable measuring device VCPLab and the cable o ring cutter ORC Micro
- Robust and compact design, easy to handle
- Fast, reliable and highly accurate measuring process
- Integrated hardware and software, touch monitor for intuitive operationReliable, high-precision clamping of the test specimen (including conical tools / conical wire guides)
- The highly precise alignment of camera and test object chuck both enable a highly accurate measurement
- No extraneous light influences thanks to measuring behind closed sliding door
- Quick and efficient cut
- Thin, evenly and parallel cut samples with a smooth surface
- Very robust device made of aluminum and stainless steel - no corrosion
- By using special chuck jaws it is even possible to cut larger samples with an outer diameter up to 200 mm (7.87“)
- Light to illuminate the cutting process
- Precise and repeatable measuring results possible with the cut samples
- Specific object size - depending on the production line
- Quick and very easy measurement
- Little training required
- Measuring software VELOX included
- Compatible with all database software of the VCP family
- Various external CAQ software are connectable
- Low operator influence due to fixed focusing as well as preset illumination
- Robust design and simple, user-friendly operation
- Shock and vibration resistant due to an optimised sensor arrangement and balanced weight distribution
- Measuring software enables various operator level settings (production, laboratory, administrator, service, etc.)
- Standardized individual components lead to supply security and therefore a short delivery period
- Easy connection with external devices
VisioCablePro
VisioCablePro® is a brand of iiM GmbH - by Exaktera.
VisioCablePro® - Cable measurement engineering has especially been developed to carry out geometrical measurements, which specifically fulfill cable producers requirements to measure the geometrical features of insulating skins and cable sheaths.
Contact Details
iiM GmbH - VisioCablePro
Neuer Friedberg 5, 98527 Suhl, Germany
Phone: +49 3681 / 455 19-0
Email: info@iimag.de
