• AWGN as high as +13 dBm
• Bandwidths up to 18 GHz
• Bandwidth, output power, and flatness can be modified for specific applications
• TTL controlled attenuation

The NC1000 Series amplified noise modules produce AWGN as high as +13 dBm, and have bandwidths up to 18 GHz. The high power modules are designed to test noise immunity for Cable TV equipment, secure communication channels, and military jamming systems. The lower power modules, <= 0 dBm, are random jitter sources for many applications including, PCIexpress, Infiniband, and 10 GigE. The Bandwidth, output power, and flatness can be modified for specific applications. A newly developed TTL controlled attenuation feature is also available.

• High-level noise modules mounted on a circuit board
• Modified BW, output power, and flatness specifications

The NC2000 Series amplified noise modules are an excellent choice for high-level noise modules mounted on a circuit board. The NC2000 Series modules are housed in 24, or14-pin dual-inline packages. The NC4000 series modules are housed in a 40-pin module that cover similar noise bands to the NC2000, but have higher crest factor, and 60 dB of TTL controlled attenuation. Modified BW, output power, and flatness specifications are available for these modules. Please consult Noisecom for availability, and appropriate package style.

• Custom electrical testing available upon request
• Wide package variety with custom configurations
• NC100 & 200 series for audio and RF applications
• NC300 & 400 series for microwave application

Noise diodes are the fundamental building blocks for analog noise systems. They are categorized for performance characteristics that enhance their broadband noise output and flat spectral response. All Maury noise diodes can deliver symmetrical white Gaussian noise and flat output power versus frequency*.

* Flatness and output power are dependent upon peripheral circuit characteristics

• Complete bias circuits
• Requires no external components
• Extremely flat output power versus frequency characteristics

The NC500 (through-hole) and NC500SM (surface mount) Series noise modules are an economical solution for built-in test requirements. They contain complete bias circuits and require no external components. Some models contain additional gain stages for high power ENR output (51 dB). The surface mount package is suitable for mounting on micro strip. The modules have extremely flat output power versus frequency characteristics that are insensitive to temperature and voltage variations.

• Complete bias circuits
• Requires no external components
• Optimizations available for frequency range and output levels

The NC520 low voltage (surface mount) noise module is an economic solution for built-in test requirements. It contains complete bias circuits and require no external components.

The surface mount package is suitable for mounting on microstrip. The modules produce extremely flat output power versus frequency characteristic that is insensitive to temperature and voltage variations.

Typical applications for the NC520 module includes built-in test equipment (bite), signal strength meters for cellular, pcs, catv, calibrators, spectrum analyzers, radar warning receivers (rwr), and dither A/D quantization error. Maury can optimize frequency range and output levels for specific applications.

• Additive white Gaussian noise
• Integrated amplifier
• Manual attenuator
• NC6000A -BER testing, and SNR applications
• NC8000A – Secure signal jamming
• Military Applications
• Custom configurations available (consult factory)

The NC6000A and NC8000A Series instruments are designed for general-purpose noise applications on the bench, or in a rack test station. The manual controls make it simple to operate and reduce test set up time. Standard units can be modified for specific customer requirements. Please consult the factory for pricing and availability of these requests.

• C/N carrier to noise ratio
• C/I carrier to interferer ration
• C/No carrier to noise density ratio
• Eb/No bit energy to noise density ratio
• Custom configurations
• 6.25″ color TFT touch screen
• Accuracy of 0.2 dB RSS
• Bit Rates from 1 bps to 1 Gbs
• Variable Output Power from -55 dBm to +5 dBm

• Ultra-low distortion signal path
• Standard connectors SMA female
• 7” touch screen display
• Dimensions: 17.22 in. wide x 6.30 in. including feet, high x 19.5 in. deep
• Fold-down feet for bench top use
• Power 115 VAC, 60 Hz
• Operating Temperature: -10° to +65°C
• Differential inputs and outputs
• Multiple differential inputs and outputs

• 5” touch screen display
• Noise output through female N connector
• Ethernet connection for remote control

The NGX1000 programmable noise generator is a high performance, broadband additive white gaussian noise (AWGN) generator in an easy-to-use compact form factor. The streamlined user interface and flat menu structure provides a fast, simple way to add RF noise in a communications system to test reliability, robustness and performance.

All functionality of the generator is accessible through the 5” touch screen or via remote control through an ethernet connection delivering flexible, programmable noise generation for broad use in semiconductor, military, aerospace, satellite, medical and communications applications.