Description: Phosphate Ester Compliant (Skydrol), 50 GPM, 3000PSI, 75HP, 480VAC, 3PH, 60Hz Electric Motor, Pressure Comped, Positive Displacement Pump, 3 Micron Absolute Filter, Air to Oil Heat Exchanger, 100 Gal. SS Reservoir, 5-50 Flow Motor., 0-5000 PSI Gauges, Pump Pressure Control

Quantity in Stock: 1

• A real-time diagnostic tool supports EMC/EMI debugging. 
• Fast visualize EMC/EMI problems. 
• Enables easy comparison of countermeasures before and after. 
• Capable of measurement from entire products to single components. 
• Factor-editor function provides correction of antenna characteristics, cable loss and preamplifier. 
• User friendly compact design. 
• Customer supplied spectrum and probes acceptable (Please consult)

• Smart Stage: Embedded controller, no separate electronics 
  • Operate directly using I²C or SPI ASCII commands -or- 
  • Evaluate with Pathway™ PC Software and USB adapter 
• Cost-effective, long-life: For high-volume production 
• Small size: 32 x 32 x 10 mm 
• High resolution: 0.5 μm with absolute encoding 
• High speed: 35 mm/s 
• Long stroke: 8 mm 
• Power: 5 V DC input, ~ 3.2 W peak when moving 
• High repeatability: (± 2 μm typical)

• Comprehensive Test Solutions - Our CTS 4.0 Series offers complete test solutions for emissions and immunity compliance testing of AC and DC power products, ensuring your products are ready for global markets.
• Single & Three Phase Operation - Offers flexibility
• Direct PC Bus Access - Provides high sampling rate and resolution for accurate measurements and high-speed data transfers
• PC-Based Harmonic & Flicker Testing - Provides real-time full-color data display updates and continuous PASS/FAIL monitoring
• Supports Global Standards - Supports European and Japanese standards
• Easy To Use Interface - Provides IEC test setup, data analysis, display, MS Word test reports, and data files generated in MS Excel format
• High Resolution - Data storage to disk for post-acquisition analysis and reporting
• Single Step - Single Step and Fast Forward replay of recorded test data at 200 mSec

See "Specifications & Details" tab for more information. 

The TEM horn antenna is an antenna used for conducting close proximity radiation immunity evaluation test (near electromagnetic field immunity test) of electromagnetic waves radiated from various wireless transmitters such as mobile devices. 

In the future, close proximity radiation immunity evaluation test using the TEM horn antenna is expected to expand to various product standards such as medical equipment (IEC 60601-1-2) and multimedia equipment (CISPR 35).NoiseKen's TEM horn antenna has a wide band, low VSWR, and wide electric field uniformity offering an ideal solution for an efficient close proximity radiation immunity test. 

• A TEM horn antenna compliant with IEC 61000-4-39 Ed.1. 
• Test without changing the antenna in the frequency range of 380MHz to 6GHz. 
• Low VSWR and high GAIN enable efficient electromagnetic wave radiation. 
• Wide field uniformity reduces the number of times of movement of the antenna when radiating the EUT. 
• Since the maximum point of the near electric field distribution for each frequency is at the center, enables radiation on the EUT based on the axis of the antenna. Hence, significantly simplifies test point alignment.

• Dual Voltage ranges that support over-voltage testing on 480V-based systems 
• Separate terminal blocks for single-phase and three-phase AC power supply outputs 
• High Power AC and DC Source 
• Auto paralleling for higher power system expansion 
• Single and three-phase modes 
• Arbitrary & Harmonic Waveform Generation 
• Standard LXI LAN, USB, and RS-232, Optional GPIB 
• Step, list, and pulse voltage transients with down to 500usec resolution 
• Complete avionics power quality test suites 
• 15kVA to 1MVA Power Levels 
• Intuitive 5” color display for ease of navigation 
• Internationally accepted test routines for EMI/EMC, Safety Compliance

• All-in-one smart module: no separate electronics 
  • Runs directly from USB adapter 
  • USB, I²C or SPI interface 
• Small size: less than 29 x 20 x 10 mm 
• High resolution: 0.5 μm
• Absolute encoding: no homing 
• Long stroke: 6 mm 
• Low power use: 3.3 V DC input, < 0.75 W when moving 
• High repeatability and low runout

See "Specifications & Details" tab for more information.