Advanced Illumination - DL071 Large Area Diffuse Light
- This Large Area Diffuse Light provides extremely diffuse illumination over an area of 18” square (457mm).
- Available in a wide array of wavelengths, providing up to 7kLux at a 1” (25mm) standoff.
- At 13.6 pounds (6.2 kilograms), the DL071 is both rugged and lightweight.
General Specs
|
Electrical Specifications |
Color |
24V Current |
All Other Controls |
|---|---|---|---|
|
455, 470, 505, 530, WHI |
0.5A |
1.02A Max |
|
|
590, 625 |
0.9A |
1.05A Max |
|
|
660, 730, 850, 940 |
1.0A |
0.8A Max |
|
|
Normal Operating Temperature |
0 - 60°C |
||
|
Weight |
6168.8g (217.6oz) (13.6lbs) | ||
|
Standard Cable Information |
2 m long -0/+150 mm (80" -0/+6") - 105°C rated PVC jacket, foil shield with drain. |
||
|
Photobiological Risk Factor |
Exempt Applicable Wavelengths: 850, 940 Group 1 (Low-Risk) Applicable Wavelengths: 455, 470, 505, 530, 590, 625, 660, 730, WHI |
||
|
Compliance |
CE, RoHS, IEC 62471 |
||
|
IP Rating |
Not Rated |
||
|
Lumen Maintenance |
L70 = 50,000 Hours |
||
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part Number Key
More Product Information
- This DCS Series Controller provides Lighting Control Flexibility in a compact 112 mm x 124 mm x 46 mm package.
- Plug-n-Play compatibility with Ai lighting Products, featuring SignaTech™ technology.
- Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs.
- Din-rail mount, UL 508a Panel listed and GUI, Web Browser or command line setup and control tools, SDK.
- 3 Independent Outputs – designed to up to 3 lights, synchronously or asynchronously.
- The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
Configuring, managing, and integrating the system are crucial steps for ensuring the success of flight testing and achieving precise telemetry. eZ Software is your go-to solution.
- eZ SetUp software allows to configure from a single acquisition unit to a complete acquisition system within a network architecture.
- eZ Operation software is an advanced tool for centralized supervision and control of complex test systems from an onboard operator station.
- eZ Processing / Advantys software offers advanced functions for data display and processing.
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
The energy industry is primed for a wave of monumental change. The transition to renewable and alternative energy sources, advancements in energy storage, the rise of smart grids, and the electrification of transportation are driving significant changes domestically and globally. These developments mean organizations require new testing protocols, enhanced safety standards, advanced testing equipment, and comprehensive interoperability and cybersecurity assessments. Regulatory changes and technological innovations further complicate testing requirements, demanding scalable and real-world simulation capabilities. When testing facilities must adapt rapidly to support R&D efforts, it’s essential that they ensure the safe, efficient, and sustainable deployment of new energy technologies. All of these factors demand energy laboratories that are future-proofed for innovative solutions.
- Latest Global and Rolling Shutters sensors from Sony® - from 2 to 12 MP
- USB3 Vision interface
- Compact fully-enclosed design with features needed by modern vision systems
- Provide advanced vision performance while using less power, less space, and fitting increasingly tight industry budgets
Our EuroBrite™ lineup outdoes the competition in so many ways. With more features at a competitive price point, there’s no better value in machine vision lighting:
- Complete built-in control for continuous and strobe modes.
- Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode.
- Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period.
- IP67 sealed enclosure suitable for washdown environments.
- Rugged construction that has been tested to withstand over 1000lb.
- Industrial grade LEDs providing high-intensity surface illumination of 65klux.
- Daisy chain up to 4 for a combined length of 24”.
- Supports all cellular technologies compliant with 3GPP/3GPP2 UE RF TRX tests including LTE/LTE-Advanced, Cat-M1/NB-IoT, NTN NB-IoT, W-CDMA/HSPA, GSM/EGPRS, TD-SCDMA/HSPA
- Support LTE-Advanced Downlink Carrier Aggregation 5CCs SISO tests in one unit
- Supports LTE-Advanced Downlink Carrier Aggregation 2CCs 4x4 MIMO and 4CCs 2x2 MIMO tests in one unit
- Supports LTE-Advanced Downlink Carrier Aggregation 4CCs 4x4 MIMO and 6CCs 2x2 MIMO tests in two units
- Supports LTE-Advanced Downlink Carrier Aggregation 5CCs 4x4 MIMO tests in three units
- Supports VoLTE voice/video echoback tests
- Supports up to 6 GHz
- 160 MHz wide frequency bandwidth (Generator/Analyzer)
- Next generation GUI with large touch panel
- Backwards compatibility with the MT8820 series
- The DL225 series of square coaxial lights features a modular heat sink and circuit design for enhanced performance, product availability and lead time.
- These coaxial lights are available in a wide variety of wavelengths from UV to IR.
- They provide intensities from 18kLux for the DL225-025 to approximately 50kLux for the larger models.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636
Imaging/Machine Vision
Download Line Card
