The LN112-30 Lens Adaptor is used for creating a 30° focused beam spread when attached to a SL112 or SL162.

• Securely connects the SL112 or SL162 to Moritex, Dolan-Jenner, and Fostec fiber optic light guides 
• Set screws are included

• The SL2420 is characterized as a Medium Aimed Spot Light. 
• Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators. 
• A range of standoffs and fields of view may be specified at the time of order. 
• The spot light is available in a wide range of wavelengths from UV to IR. 
• Diffuser and polarizer options are also available. 
• The SL2420 provides 10.1kLux at a working distance of 4” (100mm).

• This DCS Series Controller provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package. 
• Plug-n-Play compatibility with Ai lighting Products, featuring SignaTech™ technology. 
• Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs. 
• Din-rail mount, UL 508a Panel listed and GUI, Web Browser or command line setup and control tools, SDK. 
• 1 output, 3 channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.

Advanced Illumination’s AD-I3-CGX2 adaptor cable is for connecting I3/I3S configured lights with Cognex Gen2 Cameras. By default, an I3/I3S controller can connect directly to a Cognex Gen1 Camera but needs this adaptor to connect to a Cognex Gen2 Camera.

• Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz 
• Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz 
• -156 dBm/Hz Displayed Average Noise Level (Typ.) 
• -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) 
• Total Amplitude Accuracy < 1.2 dB 
• 1 Hz Minimum Resolution Bandwidth (RBW) 
• All-Digital IF Technology 
• Standard Preamplifier 
• Distance to fault capability using VNA time domain analysis 
• Up to 1.5 GHz Tracking Generator Kit 
• Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc) 
• 10.1 lnch WVGA (1024 x 600) Display

• The SL223 is characterized as a MicroBrite™ Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications. 
• Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles. 
• The SL223 is also designed for general lighting purposes where a very intense, miniaturized light source is required. General purpose spot lights may be used to create both dark field and bright field affects, depending on how they are deployed during the inspection. 
• The spot light is designed to provide 8.1kLux at a working distance of 4” (100mm) and is available in a very wide range of wavelengths from UV to IR. 
• The SL223 is rated for IP65 washdown capability.

• The SL2507 is characterized as a Small Aimed Spot Light. 
• Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators. 
• A range of standoffs and fields of view may be specified at the time of order. 
• The spot light is available in a wide range of wavelengths from UV to IR. 
• Diffuser and polarizer options are also available. 
• The SL2507 provides 2.6kLux at a working distance of 4” (100mm).