-
The SL164 is characterized as a Compact High Intensity Spot Light with sufficient thermal management to provide 200kLux at a working distance of 4” (100mm).
-
A very wide range of wavelengths are available from UV to IR.
-
Multiple beam spreads are also available as is a diffuser option.
Advanced Illumination - SL164 Compact High Intensity Spot Light
General Specs
Group 1 (Low-Risk) Applicable Wavelengths: 455, 470, 505, 530, 590, 625, 660, 730, WHI
Group 2 (Moderate-Risk) Applicable Wavelengths: 365, 375, 385, 395, 405
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part No Key
More Product Information
-
Network Enabled Distribution Amplifier
-
Low Phase Noise Reference Frequency Outputs
-
Fault Alarm Output
-
1U 19″ Rack Mount
-
Frequency Synthesizer Option
-
Hitless Switching of Reference
-
Programmable Amplitude
-
Propagation Delay Compensation
-
10 MHz Standard, Other Frequencies Available
-
The RL2316 is characterized as a Compact Aimed Bright Field ring light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The ring light is available in a wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available.
-
With its compact form factor, the RL2316 is ideal for the inspection of smaller, non-specular objects and where space for the illuminator is limited.
-
The RL3940 is characterized as a Folded Beam Dark Field ring light.
-
Precisely aimed LEDs, along with an aluminum beam folder, provide a specific and repeatable light pattern on the imaging plane.
-
The light provides up to 11kLux at a working distance of .6” (15mm).
-
The RL3940 is available in a wide range of wavelengths from UV to IR.
-
The folded-beam configuration provides dark field illumination in a compact 3.9” (100mm) housing.
-
The housing’s large inner diameter can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional mounting ring.
-
Complete built-in control for continuous and strobe modes
-
Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode
-
Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period
-
IP67 sealed enclosure suitable for washdown environments
-
Rugged construction that has been tested to withstand over 1000lb.
-
Industrial grade LEDs providing high-intensity illumination of 45klux (working distance of 200mm)
-
Daisy chain up to 4 for a combined length of 48”
-
Our High Intensity Linear Backlights offer 510 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
-
Advanced MicroVac chuck surface for minimum contact resistance between wafer and chuck
-
Safety-rated interlock system for high-power testing (meets EN 60947-5-1, EN 60204-1)
-
Supports fully automated testing up to 10kV by eliminating arcing point
-
Full wafer access via locking roll-out stage
-
On-wafer power device characterization up to 10,000 V DC / 600 A
-
Coaxial, triaxial, and pin jack feed-troughs available
-
Convenient instrument connection kits
-
Load/unload wafer to hot/cold chuck (-60° C to +300° C)
-
Up to 15% faster transition times than other systems in the market
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Monochrome (X-2620B) and color (X-2620C) models
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
-
This ultra high intensity line light series is built to handle the most extreme line scan lighting requirements.
-
Provides an intensity level of 2,100 klx (working distance of 75 mm).
-
Pre-engineered for expandability in 150 mm (6”) increments up to 2400 mm (94.5”).
-
Available in multiple wavelengths.
-
In the event of abnormally high ambient temperatures, the device automatically shuts down when the housing reaches 60°C and resumes operation at 56°C.
-
Note: Requires third party power supplies – refer to spec sheet.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636