-
Back-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects.
-
Two aperture diameters are available, .88” (22.3mm) and 1.75” (44.5mm).
-
For similar performance in a thinner housing, refer to our Edge-lit Flat Diffuse Lights (FX Series).
-
Available in visible and infrared wavelengths with an optional polarizer.
-
Provides light intensities of up to 11.7kLux at 4” (102mm) standoff.
-
Pre-engineered, expandable sizes are available from 3”x 3” (76mm) to 22”x 34” (559 x 864mm) in 1” (25mm) increments.
Amplifier Research - High Gain RF Horn Antennas for RF & EMC Testing
Our RF horn antennas exhibit increasing gain, with frequency up to 18 dBi at 1000 MHz, helping to compensate for losses that occur elsewhere in an RF test system. Use these antennas in shielded rooms or free space.
200 MHz to 1000 MHz * To 800 V/m
|
Model Number |
Description |
|---|---|
|
200 – 1000 MHz, 5000 W input power, High Gain Horn Antenna with Heavy Duty Tripod |
|
|
200 – 1000 MHz, 10,000 W input power, High Gain Horn Antenna |
|
|
400 – 1000 MHz, 3000 W input power, High Gain Horn Antenna |
|
|
0.8 – 6 GHz, 2300 W input power, High Gain Horn Antenna |
|
|
2.5 – 7.5 GHz, 12,000 W input power, High Gain Horn Antenna |
More Product Information
-
Application flexibility: Coax, Triax, RF/mmW, High Power, Double Sided
-
Temperatures range from -60°C to +300°C
-
Up to 25% lower air consumption (CDA) than other systems on the market with no compromise in transition times
-
Low Thermal Resistance Technology
-
MultiSense with multiple temperature sensors
-
Isolated from ground
-
Includes a jack for grounding and biasing
-
Advanced wafer vacuum system for warped/partial thin wafers
-
Provides uniform vacuum across the entire wafer surface
-
Advanced shielding technology
See more Key Featueres on Specfications & Details tab
-
3000VA, 2700W, 440VAC 3Ph 60Hz Isolated Input, 220VAC 60Hz Output, Freq Changer, 12BHS (10.5Ah) EBM, 2U24.7,L16-20P AC Input Panel Mount, L6-30R AC Ouput Panel Mount, SNMP, 2 x 2 Anderson EBP, Neutral Bonding Switch,with Slide Kit for 32RU Rack, Double Conversion, Rugged, High Temperature, On-line UPS, and Power Factor Correction
-
Dual inputs with automatic switchover
-
10 individually buffered outputs of 3 signal outputs
-
Have Quick, BCD and 1PPS outputs compliant with ICD-GPS-060
-
Rugged, Double Conversion, High Temperature, Isolated, Auto Select, 120 or 240 VAC Global Input & Auto Select, 120VAC Output, On Line UPS System with Power Factor Correction
-
2000VA, 1500W, 120/240VAC 50/400Hz Input and 120VAC 60Hz Output, Double Conversion, On Line, High Temperature, Isolated, Rugged UPS with Power Factor Correction for Military Applications
-
High efficiency: up to 86.9 %
-
Low no load power consumption < 90 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60950-1
-
Wide operating temperature range 0 - 50°C
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX18-F
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Sub-sampling
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (48 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
Scope of delivery
-
Camera and IEEE 1394b cable (other configurations on request)
Amplifier Research
Founded in 1969, Amplifier Research is a world-class source for broadband high power, solid state, RF amplifiers and microwave amplifiers, TWT amplifiers, log periodic antennas and high-gain horn antennas, plus EMC test equipment, software and field probes and monitors. Throughout its 50 years (and counting), AR has been responsible for a number of “firsts” which have transformed not only EMC and RF testing but also the industries and equipment affected by these tests. A sampling of these innovations includes:
- 10,000-watt tube amplifiers,100-watt solid-state • 100-1000 MHz instantaneous bandwidth Class A amplifier
- First production 16,000-watt solid-state linear amplifier from 10 kHz to 225 MHz
- 50,000-watt Class A power amplifier up to 225 MHz
- 0.7 to 6 GHz high-power Class A & AB amplifier
Additionally, they push the limits of state-of-the-art design and have ruggedized their products to make them virtually indestructible. AR amplifiers are fully tested to the extreme to ensure customers receive a product that is built to last.
Contact Details
Amplifier Research Corporation, Ametek CTS
160 Schoolhouse Rd., Souderton, PA 18964-9990, USA
Phone: 215-723-8181
Customer Service: 215-723-0275
Test & Measurement
Download Line Card
Document
