Xena2544 offers full support for the 4 test-types specified in RFC2544, and also lets you partially enable one or more test types. Xena2544 supports different network topologies and traffic flow directions on both Layer 2 and Layer 3, as well as both IPv4 and IPv6.

The highly flexible modular GMDR system is a versatile and future-proof solution for acquisition, recording, dissemination and replay of FTI data in ground station applications. 

With its high integration, incomparable range of supported video interfaces and full compatibility with global leading MDR products, the GMDR integrates seamlessly into customers‘ existing test range topologies. 

With its intelligent data reduction through segmentation, pre-selection and filtering as well as the capability to freely disseminate subsets of data among several network destinations, GMDR efficiently reduces the operator‘s workload when analyzing test results. 

For standard PCM/Ch7-Telemetry applications, two simplified, cost-efficient variants with integrated PCM/Ch7-Telemetry signal boards and one Data Express technology (DE50)- compatible storage media slot are available.

• Calibration-grade metrology standards
• Used for VNA calibration and/or calibration validation

Fixed flush and fixed offset short circuit terminations (shorts) are used to establish reference planes in transmission systems and as key elements in the calibration of vector network analyzers (VNAs). Offset shorts can be used for banded calibrations of VNA. Those with the longest offset are often used to evaluate the calibration effectiveness of a VNA by measuring the effective source match after calibration.

The N-CUBE comes as a unique solution that combines GNSS signal processing and RF front-ends. It implements the latest state-of-the-art positioning and synchronization techniques, to reach top class of performances for Real-Time Precise Onboard Orbit Determination (P2OD) and accurate time synchronization.

A Semi Anechoic EMC Chamber with 3-meter test range ensuring EMC compliance for Emission and Immunity testing. Ferrite and hybrid pyramidal EMC absorbers are combined in a unique pattern within a SmartShield high performance chamber. Operating at a 3m test distance, this chamber is compliant to ANSI C63.4/CISPR-16-1-4 with a Test Volume diameter of 1 to 2 meters.

Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.

• Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, and 20 GHz
• Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength
• 3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and TD-SCDMA
• Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping
• Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz
• DANL: –164 dBm in 1 Hz RBW @ 1 GHz preamp On
• Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz
• 1 Hz to 10 MHz Resolution Bandwidth (RBW)
• Tracking Generator up to 20 GHz
• PIM Hunting
• PIM Alert (a downloadable easyTest™ script)
• Standard three-year warranty (battery one-year warranty)