-
The SL162 is characterized as a High Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications.
-
Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles.
-
The spot light is designed with sufficient thermal management to provide 33kLux at a working distance of 4” (100mm).
-
A very wide range of wavelengths from UV to IR are available.
FRIWO - LT60 LED Driver
Product information "LT60"
Whether minimum housing cross sections, anti-vandalism in-wall installations or safety class IP67 for damp and dusty environments – with our technically leading LED drivers you are always on the safe side. In compliance with various standards such as CE, ENEC or EN61347 we realize current and voltage control in a single device and enable a comfortable lighting control via DALI or PushDIM with our DIMMbox.
If our standard program does not meet your requirements, your particular output values can be adjusted by laser trimming. Find now your tailored solution together with our specialists!
Additional information
- Output voltage: 24 V
- Family : LT60
- Current: 2500 mA
- Frequency: 50 / 60 Hz
- AC Input: connecting bracket 0,5...1,5 mm²
- Humidity: 10%- 95%
- Working temperature: 0°C - 45°C
- Standard 2: EN61347-2-13
-
Storage temperature
: -40°C - 70°C - Standard 1: EN61437-1
-
MTBF: 200.000h acc. Mil217F (based on calculations at
120Vac/60Hz & 230Vac/50Hz, ambient 25°C
and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h - Unit: LED
- Input current: 300 mA
- DC output: connecting bracket 0,5...1,5 mm²
- Output voltage tolerance: +2% / -2%
- Input tolerance: +10% / -10%
- Input voltage: 220-240 V
- Spec.0 cover sheet FW-Type: LT60-24/2500
- Protection Class: II
- color: White
- Country version: EU
More Product Information
-
Fiber coupled to allow easy movement
-
Ultra-broadband measurement
-
Transmitted or reflected data collection
-
Mates with collinear adapter (AXA40n1)
-
High signal to noise ratio
-
Hot swappable with other transmitters
-
Low noise to enable rapid data collection
-
Adjustable lens tube for focusing
-
Multiple lenses available
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 lanes, or dual-port operation of 2 links of 2 lanes each
-
Front-end module plugs into system-under-test
-
U.2 NVMe SSD DUT (not supplied) plugs into the Back-end module
-
Adjustable tray clamps and quick-release latch allow for snug fit and hot swap testing
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supplied with high-quality, custom SFF-8764 cables for Analyzer system attachment
-
Supports side-band signal triggering and capture
-
Supplied power brick makes Interposer power independent of host system
-
LEDs give quick indicators of power and status
-
Works with VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
See Specifications & Details tab for additional information
-
Supports link widths up to 16-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports error injection for deep system analysis
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Generates and responds to PCIe complaint data packets
-
Operates to 32GTps, and supports all other PCIe data rates of 2.5, 5.0, 8.0 and 16GTps
-
Supports link widths of 1, 2, 4, 8 and 16-lanes
-
Set link rates and widths and control transitions other rates
-
Tightly aligned operation with the Analyzer for fully detailed bit-level trace captures
-
Execute the PCIe compliance test suite
-
Perform LTSSM testing: both positive and negative test scenarios
-
LTSSM state tracker with history log
-
Define custom test configurations, save and load
-
Define custom test suites and execution sequence
-
Swap DLLP ACK to NACK responses. Modify CRC
-
Define, send, and modify Ordered Sets
-
Template libraries available
-
Scripting API allows complex test cases
-
Graphical control interface provides easy visual presentation and setup of test procedures
-
Xgig tools and the Exerciser user interface operate on a Windows 10 enabled PC
-
Runs on the VIAVI 5P16 Analysis Platform chassis, Xgig5P-PCIe5-X16-PF
-
Works with the Xgig5P-PCIe5-X16-EH Exerciser Host-Mode Test Stand
Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 5 kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com