You design the future. We help you make it happen.
Hyperlabs - 1.0 mm (110 GHz) Components
Keep Your Eyes Wide Open™ with baluns, pick-off tees, bias tees, DC blocks, and other 100+ GHz components designed for 112 and 224 Gbps PAM4 systems. Our ultra-broadband devices preserve clean eye diagrams with minimal signal perturbation, helping your test system keep pace with rising data rates—all proudly designed and manufactured in the USA.
|
Attenuators |
HL9429 Broadband Attenuator (DC to 110 GHz) The HL9429 is an ultra-broadband fixed attenuator available in 3 dB, 6 dB, or 10 dB values, offering a very flat frequency response from DC to 110 GHz. It is ideal for protecting sensitive instrumentation and managing signal levels in optical communications, test and measurement, high-speed data, pulse experiments, and 224 Gbps PAM4 systems. |
|---|---|
|
Baluns |
HL9409 Broadband Balun (500 kHz to 100 GHz) The HL9409, part of our series of Hyper-Broadband components, is a 180° signal splitter and combiner that offers excellent amplitude and phase match over an industry-best bandwidth of 500 kHz to 100 GHz. |
|
Bias Tees |
HL9449 Broadband Bias Tee (160 kHz to 110 GHz, 175 mA) The HL9449 is an ultra-broadband bias tee with <2.5 dB insertion loss from 160 kHz to 110 GHz, enabling DC bias insertion with minimal impedance disturbance on 50 Ω lines. Available as matched pairs or individual units with 11 V or 30 V breakdown options and multiple connector configurations, it is ideal for amplifiers, lasers, optical modulators, and 224 Gbps PAM4 systems. |
|
DC Blocks |
HL8439 Broadband DC Block (16 kHz to 110 GHz) The HL8439 is an ultra-broadband DC Block with a typical insertion loss of < 2 dB over an industry-best bandwidth of 16 kHz to 110 GHz. |
|
HL9439 Broadband DC Block (160 kHz to 110 GHz) The HL9439 is an ultra-broadband DC block with typical insertion loss of <2 dB up to 110 GHz, designed to remove DC bias and protect DC-sensitive equipment. Available as matched pairs or individual units with 11 V or 30 V breakdown options and multiple connector configurations, it is ideal for 224 Gbps PAM4, optical, and high-speed data systems, as well as improved RF power measurements. |
|
|
DC Feeders |
HL9349 Broadband DC Feeder (13 kHz to 110 GHz) The HL9349 is an ultra-broadband DC feeder with typical insertion loss of 2.5 dB from 13 kHz to 110 GHz, enabling DC bias insertion without an RF DC-blocking capacitor. Available as matched pairs or individual units with multiple connector options, it is ideal for biasing amplifiers, laser, optical modulators, and 224 Gbps PAM4 communication systems. |
|
Inverters |
HL9419 Broadband Inverter (150 kHz to 100 GHz) The HL9419 is an ultra-broadband pulse inverter with a typical fixed insertion loss of 2 dB and a very flat response from 150 kHz to 100 GHz, providing time-domain inversion equivalent to a 180° phase shift. Available as a single unit or matched pair, it is ideal for test and measurement, high-speed data systems, pulse experiments, and radar applications. |
|
Pick-off Tees |
rHL9469-PCIe8.0 Broadband Z-matched Pick-off Tee (DC to 110 GHz) The HL9469-PCIe 8.0 is a broadband Z-matched pick-off tee with flat frequency response from DC to 110 GHz on both the thru and pick-off paths, available as matched pairs (-M) or individual units (-U). It is ideal for 224 Gbps PAM4 systems, trigger and oscilloscope applications, and amplitude noise injection for datacom compliance testing with minimal signal perturbation. |
|
Power Dividers |
HL9479 Broadband Resistive Power Divider (DC to 110 GHz) The HL9479 is a RoHS-compliant g dB power divider providing excellent amplitude and phase symmetry from DC to 110 GHz with all ports matched to 50 Ω. Designed with a three-resistor network, it is ideal for 224 Gbps PAM4 systems, high-speed ADCs, and differential device frequency response testing. |
|
HL9489 Broadband Resistive Power Splitter (DC to 100 GHz) The HL9489 is a RoHS-compliant symmetrical two-resistor power splitter delivering excellent amplitude and phase symmetry from DC to beyond 100 GHz. Its tightly matched outputs enable highly accurate ratiometric power measurements in precision test applications. |
|
|
Terminations |
HL9529 Broadband Termination (DC to 110 GHz) The HL9529 is an ultra-broadband 50 Ω load termination designed to provide a matched dummy load on unused ports and prevent unwanted reflections. It is ideal for 5G wireless, test and measurement, radar systems, and Mil-Aero applications. |
More Product Information
HYPERLABS offers ultra-broadband attenuators with a typical fixed insertion loss of 3 dB, 6 dB, or 10 dB and a very flat frequency response from DC to 145 GHz.
Southwest Microwave offers an array of field replaceable cable connectors, direct solder cable connectors and direct solder flange mount cable terminations. Contact us for high-performance .047, .086 and .141 flex cable assemblies or harnesses up to 110 GHz, delivering the industry’s lowest VSWR and insertion loss.
The SMP1xxx product family is made up of the SMP1100 and the SMP1200 (pictured).
- This High Intensity Spot Light is engineered for long throw and high brightness illumination.
- Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm.
- Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm).
- Available in a wide range of wavelengths.
- Boresite -18.5° to +45°
- Height range 1.0 - 4.0m
- Pneumatic polarization change 90°
- Electric stepper motor height
- Power bypass inductance: 8 nH
- Standard DCQ probes have flat tip needles available in nickel-plated tungsten or BeCu with diameters of 0.75 mil, 1.0 mil and 1.5 mil.
- Supports collinear and non-standard needle configurations
- Up to 16 DC for standard; maximum of 24 DC for custom
- Ideal for probing the entire circuit for functional test
- DC probes can provide power or slow logic to circuit under test
- Ultra-Low SWaP: Very compact and high stability
- Swatch Width: 9.7 km @ 500 km
- Wide Aperture: 230 mm
- GSD: 1.03 @ 500 km; special mode at 0.7m
- Zerodur® Telescope: High resolution
Southwest Microwave’s high performance End Launch Connectors are designed to provide low VSWR, mode-free wide responses up to 125 GHz for single and multilayer microstrip or grounded coplanar printed circuit boards. Available in SMA (27 GHz), 2.92 mm (40 GHz), 2.40 mm (50 GHz), 1.85 mm (67 GHz) and 1.0 mm (125 GHz).
Male and female options along with narrow body and bulkhead feed-through. Unique clamping mechanism accommodates board thickness up to .300” (7.62 mm). Robust, reusable and repairable. Multiple launch configurations provide the best possible match to circuit layout. Works on microstrip and grounded coplanar waveguide (GCPW) designs. Signal-layer microstrip and GCPW test boards available. Soldering is optional.
Design and Test Assistance:
- Printed circuit board connector launch designs and connector part number recommendations for stack-ups
- 3D models for mechanical layout
- Connector Encrypted HFSS models (version 18.0 or newer) for EM simulations
The CISPR25 emc chamber is designed for emc compliance benchtop testing of automotive components and wiring harnesses . The MVG CISPR25 emc chamber is designed for the emc measurements using the requisite 1 m test distance and for a “typical bench” configuration of 2.5 m x 1.0 m. The unique design requires less volumetric space than traditional absorbers and still provides the volume required to have the requisite distances between the EUT and the walls and the emc absorber and the walls & ceiling. The chamber is designed with anechoic treatment that meets the specified attenuation in the CISPR 25 standard, and it is designed to meet the Long Wire testing specified in Annex J. The polypropylene emc absorber does not undergo the typical age-related deterioration of the typical “foam” polyurethane absorbers. The UH-series, polypropylene emc absorber is also applicable to the radar pulse testing required in some automotive test standards.
Hyperlabs, Inc.
Website
Founded in 1992, HYPERLABS is a leading designer and manufacturer of 145+ GHz Ultra-Broadband Baluns, DC Blocks, Pick-Off Tees, Bias Tees, and other high-performance components.
We also build TDR and Signal Integrity instruments used in the test and measurement industry. Our product line includes high-speed and electrostatic-protected instruments, all in low-power, portable form factors that can be controlled from any Windows PC.
