Advanced Illumination - PS24-TL 24 Volt Power Supply
- Universal input switching supply
- 24v regulated current DC – runs on 110-220v AC
- Power indicator light
- Tinned leads; marked negative/positive with wire nuts for easy connection
General Specs
Input Power |
90 VAC to 264 VAC universal; AC input frequency ; 47 Hz to 60 Hz |
---|---|
Output Power |
24v, 1.67A (40W) |
Over Voltage Protection |
150% Max, non-condensing |
Over Current Protection |
Fully Short Circuit Protected |
MTBF |
50,000 HRs at full load and 25°C |
Safety Compliance |
UL1950 [E127643]; CSA 22.2 234 [LR56927-121]; TUV EN60950 [S9452057]; MITI [91-544899], [91-54489] |
Operating Temperature |
0 to 40°C |
Mechanical Specs
Part Number Key
More Product Information

- Guaranteed performance to 43.5 GHz with Extended K™ ports
- PC control takes advantage of external computer processing power and functionality
- Compact 1U high package for efficient use of bench and rack space
- No on-board data storage eliminates the need for data purging in secure applications
- Time domain with time gating option enables easier and faster fault identification
- A common GUI interface within the ShockLine family reduces switching costs between models
- Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction

- The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design.
- When oriented across a moving web or conveyor line, unlike standard line lights, this linear light’s unique geometry highlights engraved or raised lines that run parallel to the material travel.
- Provides an intensity level of 53kLux (working distance of 75mm).
- Pre-engineered for expandability in 6” (152mm) increments up to 90” (2.28m).
- Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.


Acquire high quality images with accurate radiometry for LEO (Low Earth Observation) earth observation applications with 65 MP focal plane and control electronics. From a 500 km orbit, SEEING™ 230 Ident has 9 x 6 km2 swath, offering a 1.03m native Ground Sample Distance (GSD), and features a super-resolution optional mode providing 70cm GSD. Thanks to its unique design, SEEING™ 230 Ident has an ultra-low SWaP factor. It is made of advanced ceramic material for strength during launch and stability during operation in space. It is athermalized and gradient insensitive between -10°C to +50°C. It has a low mass, below 8kg, saving both platform and launch costs.

- Part of the MicroBrite™ family of high performance, compact machine vision lights.
- Provides diffuse illumination at a low angle to cast shadows used to identify surface defects, embossed text, etc.
- This ring light is more diffuse and less directional than the DF196.
- Can be used to produce a bright field effect when the outer diameter is smaller than the working distance.
- Available in 4 sizes with an intensity of 47klux (working distance of 64mm with DF198-180).

- This DCS Series Controller provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package.
- Plug-n-Play compatibility with Ai lighting Products, featuring SignaTech™ technology.
- Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs.
- Din-rail mount, UL 508a Panel listed and GUI, Web Browser or command line setup and control tools, SDK.
- 1 output, 3 channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.

- 0 – 100% intensity control
- For use with lights built with an ICS 2 after 3/1/2012
- NOT COMPATIBLE with LLI37, BLI38, LLI67, and BLI68 “IC” Lights

- This ultra high intensity line light series is built to handle the most extreme line scan lighting requirements.
- Provides an intensity level of 2,100 klx (working distance of 75 mm).
- Pre-engineered for expandability in 150 mm (6”) increments up to 2400 mm (94.5”).
- Available in multiple wavelengths.
- In the event of abnormally high ambient temperatures, the device automatically shuts down when the housing reaches 60°C and resumes operation at 56°C.
Note: Requires third party power supplies – refer to spec sheet.

- The RL3940 is characterized as a Folded Beam Dark Field ring light.
- Precisely aimed LEDs, along with an aluminum beam folder, provide a specific and repeatable light pattern on the imaging plane.
- The light provides up to 11kLux at a working distance of .6” (15mm).
- The RL3940 is available in a wide range of wavelengths from UV to IR.
- The folded-beam configuration provides dark field illumination in a compact 3.9” (100mm) housing.
- The housing’s large inner diameter can accommodate lenses up to 55mm in diameter.
- The light can also be ordered with an optional mounting ring.

Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636
Imaging/Machine Vision
