-
Our EuroBrite™ lineup outdoes the competition in so many ways. With more features at a competitive price point, there’s no better value in machine vision lighting:
-
Complete built-in control for continuous and strobe modes.
-
Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode.
-
Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period.
-
IP67 sealed enclosure suitable for washdown environments.
-
Rugged construction that has been tested to withstand over 1000lb.
-
Industrial grade LEDs providing high-intensity illumination of 85klux (working distance of 100mm).
-
Daisy chain up to 4 for a combined length of 24”.
IntelliPower - FA00396 Power Distribution Unit
-
230Vac Input, L6-30P1 on 44.0” Power Cord, Qty 4 L630R1 on 24" Cords, Each Output having a Circuit/Switch control, 1U9.5, Aluminum
TYPE | SPECIFICATION |
---|---|
Power Rating | 150W |
Chassis Configuration | 1U, ≤23"D |
Input Voltage | 120 VAC |
Input Frequency | 50/60 |
Input Connector | Pigtail |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
More Product Information
-
3000VA, 2.1KW, 115 VAC 50/60 Hz Input, 115 VAC, 60 Hz Output, Frequency Changer, Galvanic Isolation, Power Factor Corrected, Rack Unit, 3U High x 19" Wide x 16.75" Deep, Strain Relieved Power Cables, Rugged, Double Conversion UPS, to Provide Power Conditioning and Battery Hold-up for Shipboard Applications
-
Advanced MicroVac chuck surface for minimum contact resistance between wafer and chuck
-
Safety-rated interlock system for high-power testing (meets EN 60947-5-1, EN 60204-1)
-
Supports fully automated testing up to 10kV by eliminating arcing point
-
Full wafer access via locking roll-out stage
-
On-wafer power device characterization up to 10,000 V DC / 600 A
-
Coaxial, triaxial, and pin jack feed-troughs available
-
Convenient instrument connection kits
-
Load/unload wafer to hot/cold chuck (-60° C to +300° C)
-
Up to 15% faster transition times than other systems in the market
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-ended Active Probes
-
Differential Active Probes
-
-
High Power AC Source
-
Programmable AC power for frequency conversion and product test applications
-
-
Expandable Power Levels
-
Available output power of 30, 45, 75 and 90 kVA per unit and multi-unit configurations for power requirements up to 180 kVA and above
-
-
Remote Control
-
Standard RS232, USB and IEEE-488 (GPIB) and optional LAN interfaces are available for automated test applications.
-
-
On-Off power switch
-
30 A Circuit Breaker
-
Inlet - NEMA L6-30
-
Outlets – NEMA L6-30R
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
-
High efficiency: up to 81.6%,
-
low no load power consumption <95mW,
-
meets DoE efficiency level VI,
-
CoC version 5 Tier 2,
-
ultra-low leakage current ≤10μA,
-
IEC 60601-1-2, 4th edition ready,
-
wide operating temperature range 0 - 45°C,
-
isolation 2x MOPP,
-
double housing safety: snapped & welded,
-
IP42 approved interchangeable plug system as additional accessories,
-
IEC 60601-1-11 ready with IPX2 adapter
-
Power Conditioner 3000VA, 3000W, Isolated, 220VAC at 50 Hz Input, and 220VAC at 60Hz Output
-
3000 VA, 2700 W, 115 VAC, 60 Hz input and 120 VAC, 60 Hz output, double conversion, rugged, high temperature, isolated, On-Line UPS with Lead Acid 8 battery hot swap drawer, optional EBP, with 1399 power factor correction for Navy shipboard applications
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form