-
The SL2507 is characterized as a Small Aimed Spot Light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The spot light is available in a wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available.
-
The SL2507 provides 2.6kLux at a working distance of 4” (100mm).
IntelliPower - FA10511 Power Conditioner
-
2500VA, 2.0KW, 120 VAC 60 Hz Input, 120 VAC, 60 Hz Output, Frequency Follower, Galvanic Isolation, Power Factor Corrected, Rack Unit, 2U High x 17" Wide x 21" Deep, Rugged, Double Conversion, to Provide Power Conditioning and Tempest Isolation for Secure Military Applications
TYPE | SPECIFICATION |
---|---|
Power Rating | 225W |
Chassis Configuration | 2U, ≤23"D |
Input Voltage | 115 VAC |
Input Frequency | 50/60 |
Input Connector | IEC320 |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
Communication | None |
More Product Information
-
2000VA, 1600W output, double conversion, rugged, high temperature, global input, isolated, on line UPS providing auto-select for inputs of either 120 or 240VAC with output of 120VAC, 60 Hz to provide power back up, power conversion and power conditioning with hot swap battery, frequency conversion and power factor correction
-
1500 VAC, 1.05 KW, 120V 50/60 Hz Input, 120V 60 Hz Output, 4 Battery Hot Swap Drawer, 3U High x 20.5" Deep, Double Conversion, Rugged, Isolated, On‐Line Rack Mounted UPS System with Power Factor Correction for Navy Shipboard Applications
-
400 VA, 250 Watts, 120 VAC, 60 Hz and 120 VAC, 60 Hz, Double Conversion, On-Line, Isolated, Rugged UPS with Power Factor Correction for Military Applications
-
24-bit, delta-sigma ADC, simultaneous sampling
-
Programmable Sample Rate up to 128kSPS
-
Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
-
Voltage Excitation: 0.5V to 10V
-
Current Excitation: 0.46mA
-
2-Wire & 4-Wire Ohms/RTD
-
Bridge Zero Balancing
-
Built-In-Self-Test (BIST)
-
Strain Lead Wire Calibration
-
Shunt Calibration: 50kΩ, 100kΩ & External provided by User
-
TEDS Support
-
LXI Ethernet Interface
-
IEEE-1588 Synchronization
-
Power over Ethernet (PoE) or 10–50 V DC input
-
Built-in Parallel Data Streaming
-
Full-featured Embedded Web Interface
-
Compact 1U Half-rack Form Factor
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
AR’s microwave amplifiers are just as tough and dependable as our RF amplifiers, and they are backed by the same comprehensive warranty. Our microwave amplifiers offer the hard-to-find combinations of power and bandwidth in frequency increments and power output you need for today’s test applications.
-
3000VA, 2500W, 120VAC 50/60Hz Input and 120VAC 60Hz Output, Double Conversion, Online, High Temperature, Isolated, Rugged UPS with Power Factor Correction for Industrial Applications
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form