Junkosha - 3 Series Cables - Temperature Phase Stability
Our 3 Series cable assembly showcases excellent phase stability against temperature fluctuations.
Continuous operating temperature range: -65 to +125°C (except MWX315: -30 to +85°C).
| Cable Type | Maximum Usable Frequencies | Standard Insertion Loss (dB/m) | Outer Cable Diameter (mm) | Cable Weight (g/m) | Continuous Operating Temperature Range (°C) | Assembly Length (mm) | ||
|---|---|---|---|---|---|---|---|---|
|
@18.5 GHz |
Maximum Frequency |
Minimum | Maximum | |||||
| MWX311 | 18.5 GHz | 3.4 | - | 2.7 | 18.5 | -65~+125 | 100 | 10000 |
| MWX312 | 2.2 | - | 4.1 | 42 | 100 | 20000 | ||
| MWX313 | 1.9 | - | 4.7 | 52 | 100 | 20000 | ||
| MWX314 | 0.8 | - | 7.7 | 125 | 200 | 20000 | ||
| MWX315 | 18.0 GHz | - | 0.76 | 8.6 | 155 | -30~+85 | 500 | 50000 |
| MWX321 | 26.5 GHz | 1.8 | 2.4 | 4.7 | 52 | -65~+125 | 100 | 20000 |
| MWX322 | 1.1 | 1.3 | 5.2 | 60 | 200 | 20000 | ||
| MWX341 | 40.0 GHz | 2.1 | 3.3 | 4 | 40 | 100 | 10000 | |
| MWX342 | 1.5 | 2.4 | 3.9 | 35 | 200 | 10000 | ||
This table provides standard length availability within our catalog. We can provide custom lengths upon request; please contact us to discuss.
Features
- Cable assembly with excellent phase stability against temperature fluctuations
- Wide temperature usage range
- We also have an extensive lineup of connectors
- Connector neck has been reinforced, providing superior durability than standard microwave cables for wiring between devices
Use
- Electronic equipment inside communication satellites and ground stations
- Electronic equipment inside flight instruments
- Air traffic control equipment
- Electronic equipment on ships
- Equipment which is severely impacted by signal leakage and interference
Bending Test Comparison Data for MWX312 and a Conventional Cable
The connector on one end of test cable (MXW312-00500AMSAMS, measuring 500 mm in length and with SMA (m) connectors on both ends) was fixed in place. The connector on the other end was moved in the sequence a → b → c, after which initial insertion loss and return loss values were compared to those after the test.
Top graph: MWX312-00500AMSAMS
Bottom graph: Conventional product
* Data are actual measurement values, not guaranteed values.
Document
More Product Information
- Available in 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models.
- All models feature 2 channels.
- Max Sampling rate of 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models.
- Up to 16-bit vertical resolution (14-bit on 30MHz & 60MHz models).
- All models have 4.3" Touchscreens.
- Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM).
-
Integrated on-board image processing
-
Single board design
-
Easy hardware and software integration
-
Broad range of state-of-the-art sensors
-
Intelligent power management
-
Cost optimized design
- High-density, compact (1U) precision data acquisition instruments
- LXI™ LAN connectivity
- Fully integrated signal conditioning maximizes performance and accuracy
- Easily integrate thermocouples, voltages, RTDs, thermistors, frequency, strain and pressure on an per-channel basis
- Distributed, synchronized measurements over the wire
- Scalable architecture easily expands from tens to thousands of channels
- DC version available for test cells requiring closer proximity to test article
- End-to-end self-calibration ensures optimum runtime performance
- Web-based access for monitoring and control
- Exlab turnkey software for simplified setup, control and data display
- For applications requiring power cables longer than the standard 2 meters provided with Ai lights.
- Standard cable lengths are 3, 5, 9 and 15 meters.
- IEC 61000-4-4 Ed.3 standard compliance.
- Pre-check function is installed. Inspection before testing is now easy.
- Normal mode test support. Taking account of field troubles is possible. (option)
- Utilize an outlet box that simplifies EUT connection. (option)
- Compared with conventional products, the size has become compact. (Approximately 67% by volume)
- Easy to understand Panel display reduces mistakes in connecting power cables.
- Software control with Windows. (option)
- Next calibration date can be notified. (Windows software only)
- Employ LCD screen with multi-language support and enhanced operability.
- Maximum output voltage of 5 kV and maximum pulse frequency of 2 MHz allow you to test above the standard test level.
- CDN capacity is increased to single phase type AC 240 V 20 A, single and three phase type to AC 600 V 63 A, supporting wider range of EUT.
- Large capacity CDN (100 A or 150 A) option available for Injection test on various EUT.
- Using coupling clamps, EMS probe kits, you can test the signal lines and evaluate the noise immunity on the PCB. (option)
The Low Frequency Tuner (LFT) is a unique product technology using M algorithms for low frequency wideband tuning. Three or more cascaded tuning sections use series transmission cables and parallel rotary capacitors. The length of the cables and number of tuning sections are optimized for maximum tuning range over a given bandwidth. HLFT tuners use 6 tuning sections allowing second harmonic frequency tuning.
- Boost performance by up to 3x over its precursor thanks to an Intel x6000 series embedded processor
- Capture high-resolution images at high speed through a choice of CMOS sensors from two to 16 Megapixels
- Deploy in dirty, humid, or harsh industrial environments by way of a compact IP67-rated design
- Communicate actions and results to other automation and enterprise equipment via real-time digital I/Os, and Ethernet (TCP/IP, CC-Link IE Field Basic, EtherNet/IP™2, Modbus® , PROFINET® , and native robot interfaces)
- Handle Human-Machine Interface (HMI) function by way of VGA and USB connectivity
- Simplify vision setup and upkeep via integrated lens focusing and illumination intensity control
- Synchronize to the manufacturing line through the support for incremental rotary encoders
- Solve machine vision applications efficiently with Aurora Design Assistant by constructing flowcharts instead of writing program code
- Maintain control and independence through the ability to code custom flowchart steps
- Tackle machine vision applications with utmost confidence using field-proven tools for analyzing, locating, classifying, measuring, reading, and verifying
- Leverage deep learning for visual inspection through image classification and segmentation tools
- All Digital IF technology
- 10.1” WVGA (1024 x 600) Display
- Frequency range from 9 KHz up to 3.2 GHz
- -161 dBm/Hz Displayed Average Noise Level (Typ)
- -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
- Total Amplitude Accuracy < 0.7 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- Comes with Preamplifier
The SM7000 Series microwave switching modules are members of the VXI Technology SMIPII™ family. They offer a modular design allowing custom switching configurations to be easily assembled and modified in the field.
The SM7000 is a single-wide, C-size VXI module, which can support up to six different microwave switches including: a dual SPDT; SP3T through SP6T; transfer switches and passthrough adapters that allow the module to control up to eight externally mounted relays each.
Junkosha, Inc.
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
Reflecting our corporate motto of “delivering unsurpassed value,” Junkosha continually focusses on activities that address the unmet needs of our customers worldwide. Across the company, Junkosha delivers products that are of the highest quality, this in turn calls for the highest performance and diligence from staff and partners. In order to realize this, Junkosha strives to anticipate customer needs while achieving complete customer satisfaction. Every day, we are challenged to “develop advanced technologies”, “improve our products’ capabilities", and “seek new applications”. We respond to our customer’s requirements quickly, responsively and cost effectively.
Contact Details
Junkosha Inc. Japan Office - Tokyo Business Center
15F Ochanomizu-Kyoun Bldg., 2-2 Kanda-Surugadai, Chiyoda-ku, Tokyo, 101-0062, Japan
Phone: +81-3-3518-6520
Fax: +81-3-3518-6523
Junkosha USA Inc. West Coast Office
2415 Campus Drive, Suite 140, Irvine, CA 92612, USA
Phone: +1-949-825-6177
Test & Measurement
Download Line Card
