• Single-mode fiber with FC/PC connector
• Unique line uniformity and μ-optics for thin lines ( <15 μm [1/e²] )
• Red, green and blue wavelengths
• Optical output power up to 35 mW
• < 15 μm bei FWHM
• M2 < 1.05
• Analog and simultaneous TTL modulation up to 200 kHz
• Fail-safe for critical applications (e. g. medical)
• OEM-version without housing and TEC (PCB-version)

NEO X01 3000 PSI Adapters

• Tri-Band S/X/KA: The best ratio of miniaturization/performance in any configuration
• AutoTrack S-Band: Supports any kind of operation
• Simultaneous Dual-Pol: For S, X and Ka-Band
• Earth Observation/Satellite Constellations: Meet your requirements
• Radome Covered: Maximum sustainability for any environment

• Image circle: 43.2 mm - 82 mm
• 4 focal lengths: 40 mm - 100 mm
• Homogeneous imaging performance across the entire image field
• Very low distortion and high resolution
• V38-Mount, compatible to theV38 mounting system
• Initial apertures: F2.8 - F5.6

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

LUMIMAX® High Power LED Spot Lights are particularly compact, but at the same time extremely powerful and versatile. 

Adjustable precision optics of the LED Spot Lights allow adjustment of the radiation characteristic to the required working distances and image fields, enabling a focused or very homogeneous illumination of the object to be inspected.

LED Spot Light's filter thread allows mounting of components such as polarisation filters or bandpass filters for fluorescence applications. With the C-Mount connector, either integrated or available as an accessory, lenses for focusing can be used.

Despite their compact design, the LUMIMAX® LED Spot Lights feature an integrated lighting controller for continuous or strobe mode.

The VTI Instruments 16-Channel bridge and strain gauge measurement instrument

• 24-bit, delta-sigma ADC, simultaneous sampling
• Programmable Sample Rate up to 128kSPS
• Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
• Voltage Excitation: 0.5V to 10V
• Current Excitation: 0.46mA
• 2-Wire & 4-Wire Ohms/RTD
• Bridge Zero Balancing
• Built-In-Self-Test (BIST)
• Strain Lead Wire Calibration
• Shunt Calibration: 50kΩ, 100kΩ & External provided by User
• TEDS Support
• LXI Ethernet Interface
• IEEE-1588 Synchronization
• Power over Ethernet (PoE) or 10–50 V DC input
• Built-in Parallel Data Streaming
• Full-featured Embedded Web Interface
• Compact 1U Half-rack Form Factor

NEO 3XX Adapters