• For applications requiring power cables longer than the standard 2 meters provided with Ai lights. 
• Standard cable lengths are 3, 5, 9 and 15 meters.

Very useful where space is restricted, the EMC chamber EMC-MC will settle into almost any office space. Its small overall size results from the use of our modular SmartShield chamber lined with our AEPH HyPyr-LossTM absorber technology requiring less volumetric space than in a traditional chamber. This mini compact EMC chamber is applicable in EMC pre compliance and general Research & Development RF testing.

• Calibration-grade metrology standards
• Used for VNA calibration and/or calibration validation

Shielded, coaxial opens are used in the calibration of vector network analyzers to provide a nominal 180° phase offset from a compatible reference short over a wide range of frequencies. At these frequencies, open circuit terminations are inherently imperfect. Shielding the open essentially eliminates radiation loss, but creates a residual frequency-sensitive capacitance. An accurate knowledge of the open’s effective capacitance is essential to an accurate calibration of the analyzer. Maury opens are characterized for effective capacitance versus frequency by means of a fourth order polynomial curve fit, and the nominal capacitance coefficients are provided with each unit.

• The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design. 
• When oriented across a moving web or conveyor line, unlike standard line lights, this linear light’s unique geometry highlights engraved or raised lines that run parallel to the material travel. 
• Provides an intensity level of 53kLux (working distance of 75mm). 
• Pre-engineered for expandability in 6” (152mm) increments up to 90” (2.28m). 
• Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.

• High Power Density: Up to 15 kW in 3U, 30 kW in a 6U chassis 
• Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW 
• Fast Load Transient Response: Protection from undesired voltage excursions 
• Low Ripple and Noise 
• Intuitive Touch Screen Display 
• Parallelable up to 150 kW 
•  Sequencing: Free system controller & speed up test 
• Low audible noise: Temperature controlled variable speed fans

The VS1510 is a video & data recorder/server packaged in a rugged compact chassis (4.92” x 5.75” x 7.28 ” / 9.9 lb), for recording on a Removable Memory Module (RMM).

Recorded data can be replayed in a standard PC/Windows® environment, using specific or COTS mission debrief solutions for post mission analysis.

In addition, typically for ISR applications, data can be replayed while recording on board. The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for collecting, processing, storing, utilizing, and sharing field and mission data.

These units are designed for both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, conforming to established standards such as DO-160 and MIL-STD-810.

• S-parameters DC to 40 GHz, single-ended and mixed-mode
• Impedance Profile with <1 mm resolution, differential and common-mode 
• Internal, automatic OSLT calibration
• USB-connected, small, lightweight
• Flexible display of the measurements
• Remove effects from fixtures, connectors and cables
• Emulate eye diagrams with CTLE, DFE and FFE equalization
• Advanced jitter analysis