-
The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design.
-
When oriented across a moving web or conveyor line, unlike standard line lights, this linear light’s unique geometry highlights engraved or raised lines that run parallel to the material travel.
-
Provides an intensity level of 53kLux (working distance of 75mm).
-
Pre-engineered for expandability in 6” (152mm) increments up to 90” (2.28m).
-
Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
Sorensen - SGX Series 5kW-30kW High Power Modular DC Power Supplies
-
High Power Density: Up to 15 kW in 3U, 30kW in a 6U chassis
-
Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
-
Fast Load Transient Response: Protection from undesired voltage excursions
-
Low Ripple and Noise
-
Intuitive Touch Screen Display
-
Parallelable up to 150 kW
-
Sequencing: Freesystem controller & speed up test
-
Low audible noise: Temperaturecontrolled variable speed fans
The Sorensen SGX Series represents the next generation of high power programmable DC power supplies. The SGX Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20 V output in a 3U package the SGX leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.
At the heart of the SGX series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power.
Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system current.
Advanced Intelligent Control
The SGX Series is operated from the intuitive, easy-to-use front panel touch screen display. Quickly access output programming parameters, measurements, sequencing, configuration and system settings from the touch screen interface. Functions and parameters can be directly selected from the touch screen or by using the encoder selector button. The control resolution is adjusted by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range.
Additionally, the instrument can be controlled via LXI Ethernet and RS232 standard control interfaces, as well as through the optional GPIB control interface
SGX / SGI Comparison Chart | ||
---|---|---|
Feature | SGX | SGI |
Modular Design | • | • |
Fast Load Transient | • | • |
Parallelable | • | • |
Analog & Digital Summing | • | • |
Direct Front Panel V/1 Control | • | • |
Touch Screen | • | |
Sequencing | • | • |
Save / Recall Setups | • | • |
System Power Readouts | • | • |
Constant Power Mode | • | • |
RS-232C | Standard | Standard |
LXI Class C Ethernet | Standard | Optional |
GPIB | Optional | Optional |
Applications | |
---|---|
Burn-In | Compliance Testing |
Materials Research | Process Control |
Product Validation | Automotive Electronics |
Rackmount ATE Systems | Battery Charging |
See the SFA product page for very high current slew rate and low stored energy applications. |