Sorensen - XPF Series Benchtop power supply featuring dual isolated outputs
- PowerFlex design provides higher currents at lower voltages enabling one model to meet many different voltage/current requirements.
- Compact design for bench use or rack mounting (1/2 or 1/4 rack width)
- True analog controls with digital settings locking (S-Lock)
- Mixed-mode regulation with linear final regulation for low noise
- Dual models have isolated voltage tracking and synchronous on/off.
- P models have RS-232, USB, and LXI-compliant LAN interfaces plus duplicate rear terminals. GPIB Optional.
The Sorensen XPF is a new type of bench power supply designed to meet the need for flexibility in the choice of voltage and current. Typically, the maximum voltage and maximum current are not required simultaneously. The PowerFlex™ design enables higher currents to be generated at lower voltages within an overall power limit envelope. This is achieved by using the latest switch-mode technology.
The XPF60-20D are dual-output DC bench power supplies with two completely independent and isolated outputs. If required, the outputs can be wired in series or parallel to achieve up to double the maximum voltage or double the maximum current. The new XPF60-20S is a single-output version of the XPF60-20D providing 60V and 20A within its 420W power envelope.
The XPF Series benchtop DC power supply has advanced digital features while keeping its simple-to-operate analog controls.
The series also has a remote programming option making the popular XPF perfect for some ATE applications. Communication interfaces include LXI Class C Ethernet, USB and RS-232, and optional GPIB. Please see the XPF brochure section for the XPF60-20DP brochure which fully describes the advanced features.
Protection
- Over-voltage protection per output
- Switchable remote or local sense
More Product Information
Southwest Microwave offers a broad family of SSBP multi-coax contacts and assemblies to address RF/microwave packaging miniaturization and flexibility challenges. These push-on coax contacts simplify interconnections and cabling while offering greater system reliability than the alternative of mating a large array of standard coax connectors. These SSBP coax contacts were designed to fit into standard off-the-shelf MIL-DLT-38999 and MIL-DTL-24308 D-Sub connectors and are interchangeable with standard signal contacts available in 20 HD, 20, 16, 12, 8 sizes to accommodate a variety of performance requirements.
Contact us for flexible cable assemblies and harnesses for OTS MIL-DTL-38999 series I, II, III, and IV or MIL-DTL-24308 D-sub connectors. All size 20 contacts are sold on cables.
- High DC power density up to 150 kW in a single bay rack-mount cabinet. Up to 240 kW in a dual bay rack.
- Fast load transient response provides protection from undesired voltage excursions.
- Fast slew rate with exceptional rise/fall times for speed-critical applications.
- Low ripple suitable for the most sensitive applications.
- Low audible noise with temperature controlled variable speed fans.
- High accuracy voltage/current measurements without external DMMs.
- Modular architecture simplifies sparing and maintenance.
- 3000 VA to 15000 VA of AC Output Power
- Combines AC/DC source and power analyzer
- Harmonic analysis of Voltage and Current
- Programmable Impedance
- AC, DC and AC+DC Output Modes
- Multiple Chassis Configurations
- Powerful output transient generation
- High Crest Factor Capability
- Arbitrary waveform generation
- IEC 61000-3-2 and IEC 61000-3-3
- Highest Power Density
- Comprehensive Digital and Analog Interface Options
- Scalable, Multi-Unit Design
- Multi-Channel Support
- Straightforward Front Panel Controls
- High Reliability
- Ideal for engineering lab use
- Digital features with analog controls
- Remote control for bench, system & ATE applications.
- "P" models have RS-232, USB & LAN (LXI compliant, class C) standards.
- S-Lock: Set and lock the voltage.
- V-Span: user-defined voltage limits
- Small benchtop footprint
The award winning VXI Modular Instrumentation Platform (VMIP™) provides customers with a level of modularity for instruments that is unmatched in the industry. The VMIP™ makes a single VXIbus card slot three times more powerful than single device solutions. Each VMIP™ instrument can be mixed and matched with other VMIP™ devices for added flexibility.
This unique dual-axis positioner is particularly suited for testing direction-sensing antennas. The virtual elevation axis enables rotation of the DUT around its phase center, placing the mechanical support system invariably behind the DUT. This feature maintains the center of the DUT in one place, while eliminating scattering and interference from the positioning structure.
- The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
AMETEK Programmable Power
Programmable Precision AC & DC Sources, Loads and Custom Power Solutions
