• The compact design of the DL2230 is easy to integrate into machine vision applications that require a space saving lighting design. 
• The housing of this Extra Small Dome Light has an outer dimension of 2.83” (71.9mm) and an inner, working diameter of 1.95” (49.5mm).

• The SL162 is characterized as a High Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications. 
• Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles. 
• The spot light is designed with sufficient thermal management to provide 33kLux at a working distance of 4” (100mm). 
• A very wide range of wavelengths from UV to IR are available.

• Latest Global and Rolling Shutters sensors from Sony® - from 2 to 12 MP
• USB3 Vision interface
• Compact fully-enclosed design with features needed by modern vision systems
• Provide advanced vision performance while using less power, less space, and fitting increasingly tight industry budgets

• The SL223 is characterized as a MicroBrite™ Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications. 
• Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles. 
• The SL223 is also designed for general lighting purposes where a very intense, miniaturized light source is required. General purpose spot lights may be used to create both dark field and bright field affects, depending on how they are deployed during the inspection. 
• The spot light is designed to provide 8.1kLux at a working distance of 4” (100mm) and is available in a very wide range of wavelengths from UV to IR. 
• The SL223 is rated for IP65 washdown capability.

• This High Intensity Spot Light is engineered for long throw and high brightness illumination. 
• Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm. 
• Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm). 
• Available in a wide range of wavelengths.

• This Large Area Diffuse Light provides extremely diffuse illumination over an area of 18” square (457mm). 
• Available in a wide array of wavelengths, providing up to 7kLux at a 1” (25mm) standoff. 
• At 13.6 pounds (6.2 kilograms), the DL071 is both rugged and lightweight.

The energy industry is primed for a wave of monumental change. The transition to renewable and alternative energy sources, advancements in energy storage, the rise of smart grids, and the electrification of transportation are driving significant changes domestically and globally. These developments mean organizations require new testing protocols, enhanced safety standards, advanced testing equipment, and comprehensive interoperability and cybersecurity assessments. Regulatory changes and technological innovations further complicate testing requirements, demanding scalable and real-world simulation capabilities. When testing facilities must adapt rapidly to support R&D efforts, it’s essential that they ensure the safe, efficient, and sustainable deployment of new energy technologies. All of these factors demand energy laboratories that are future-proofed for innovative solutions.

• The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
• PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
• Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
• Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
• High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
• Single Step and Fast playback mode of test results.

• For applications requiring power cables longer than the standard 2 meters provided with Ai lights. 
• Standard cable lengths are 3, 5, 9 and 15 meters.