Teledyne LeCroy - Differential Probes (8-30 GHz)
- Bandwidth models from 8 GHz to 30 GHz
- Low loading and high impedance for minimal signal disturbance
- Wide variety of tips:
- Standard and high-sensitivity 30 GHz solder-in tips
- High-temperature solder-in tip with 1-meter lead
- QuickLink adapter for mixed-signal probing
- Handheld browser tip
- Tips for direct oscilloscope connection to CrossSync PHY protocol analyzer interposers
- Built-in tip identification for simple setup and precise signal reproduction
- Ideal for debug and validation of:
- PCIe 1.0 to 6.0
- DDR3/LPDDR3
- DDR4/LPDDR4/LPDDR4X
- DDR5
- Other high-speed serial interfaces
|
Specifications |
|
|---|---|
|
8 GHz differential probe with ProBus2 interface |
|
|
8 GHz differential probe with ProLink interface |
|
|
13 GHz differential probe with ProLink interface |
|
|
16 GHz differential probe with ProLink interface |
|
|
20 GHz differential probe with ProLink interface |
|
|
25 GHz differential probe with ProAxial interface |
|
|
30 GHz differential probe with ProAxial interface |
|
|
DH series tip - CrossSync PHY PCIe6 Tip |
|
|
DH series tip - CrossSync PHY PCIe5 CEM x16 |
|
|
DH series tip - CrossSync PHY PCIe5 EDSFF |
|
|
DH series tip - CrossSync PHY PCIe5 U.2 U.3 |
|
|
DH series high-sensitivity solder-in tip, 30 GHz BW, 2.0 Vpp range |
|
|
DH series solder-in tip, 30 GHz BW, 3.5 Vpp range |
|
|
DH series high-temperature solder-in tip, 16 GHz BW, 3.5 Vpp range |
|
|
DH series QuickLink adapter, 8 GHz BW |
|
|
DH series QuickLink adapter kit with 3 x QL-SI tips |
|
|
DH series PT browser tip, 16 GHz BW, 3.5 Vpp range |
|
General-purpose probing up to 30 GHz
Teledyne LeCroy’s DH series 8 to 30 GHz differential probes offer the combination of bandwidth, input range and offset capability to address any high-speed probing requirement from debugging serial data interfaces to validating DDR memory systems. DH series probes provide superior loading characteristics and are calibrated with a custom “fine-tuned” frequency response. The ultra-low loading and flat frequency response ensure accurate measurements.
Smart probe tips for all applications
Two 30 GHz solder-in leads let you choose between a 3.5 Vpp input range for general-purpose applications, or high sensitivity with exceptionally low noise. Also available are a 1-meter long 16 GHz high-temperature tip, a 16 GHz browser tip, and a QuickLink adapter for connecting mixed-signal probe tips. The same solder-in, high-temperature and QuickLink tips are compatible with all DH series probes and can be interchanged between any probes in the series for ultimate flexibility in the lab. Each tip contains its own identification and calibration data for accurate signal reproduction and superior ease of use.
Solder-in tips (DH-SI and DH-SI-HS)
The 30 GHz DH series solder-in tips are extremely small to facilitate access to signals on tightly-packed boards, with a 9-inch lead length to help reach difficult probing points. The standard DH-SI tip has a 3.5 Vpp input range, perfect for DDR memory and other general-purpose high-speed serial signal applications. For smaller signals where low noise is critical, the DH-SI-HS high-sensitivity tip has a 2.0 Vpp input range and exceptional noise performance.
High-temperature tip (DH-HITEMP)
For tests where the device must be placed in an environmental chamber, the DH-HITEMP tip allows the solder-in probe tip to be separated from the probe amplifier by up to 1 meter. The tip offers 16 GHz bandwidth, 3.5 Vpp input range and an operating temperature range of -40 °C to +125 °C, making it ideal for environmental testing of a wide variety of high-speed devices.
Positioner (Browser) Tip (DH-PT)
In situations where quick access to many test points is critical, the DH-PT browser tip offers 16 GHz of bandwidth in a convenient "pencil"-style form factor. An included Freehand probe holder allows simple hands-free browsing.
CrossSync PHY cross-layer probing (DH-CSPHY)
CrossSync PHY technology enables waveforms from Teledyne LeCroy oscilloscopes to be viewed alongside protocol analyzer traces, with complete time-correlation of electrical and protocol information. A range of CrossSync PHY enabled interposers provides direct connection for DH Series probes to high-speed signal lines using special DH-CSPHY probe tips.
QuickLink adapter (DH-QL)
The DH-QL adapter enables QuickLink solder-in probe tips to be used with any DH series probe. For embedded systems validation and debug, these tips can be used for both analog probing with the DH series probes and digital acquisition with the HDA125 high-speed digital analyzer.
Mixed-signal flexibility
When connected to a Teledyne LeCroy analog differential probe, QuickLink tips provide 8 GHz of bandwidth and a flat, well-controlled frequency response. When used with the HDA125 for digital acquisitions, they support 3 GHz bandwidth with industry-leading sensitivity. The HDA125 provides the ability to acquire and analyze DDR command bus signals and other high-speed digital buses directly alongside time-correlated analog signals on the standard oscilloscope channels.
More Product Information
- 2, 4 and 8 channel configurations
- 16-bit vertical resolution
- Sample Rate up to 12.32 GS/s with RF mode
- 16-bit vertical resolution.
- 4 Gpts waveform memory per channel
- Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset 50 Ohm
- 8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
- Single frequency measurement range that works from 0.05 Hz to 1 MHz
- Very stable TCXO base clock, 50 MHz ±1 ppm
- 195 kΩ Input impedance with selectable coupling (AC/DC)
- Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
- Programmable threshold and hysteresis levels with 1 mV resolution
- Support for quadrature encoder
- Isolated DIO channels with up to 60 V compliance
- Isolated and independent 16-bit DAC channels, configurable for voltage or current output
- Specified performance to 43.5 GHz with Extended K™ ports
- Simple signal integrity testing of passive multiport and differential devices
- Advanced time domain option provides tools for signal integrity analysis
- Wide dynamic range enables measurement of very low reflection artifacts
- Excellent corrected directivity minimizes measurement uncertainty
- SmartCal™ auto calibration unit reduces calibration and setup time
- Time domain with time gating option enables TDR-like measurements
- Modern LAN interface for remote control is faster than GPIB
- A common GUI and SCPI interface within the ShockLine family
- The compact 3U high chassis allows for the efficient use of rack space
- Bias tee option simplifies test setups where the DUT needs DC biasing
- Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
High voltage differential probes provide high CMRR over a broad frequency range (up to 400 MHz) to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.
AI, cloud computing, and hyperscalers are accelerating the demand for ultra-high-speed, low-latency connectivity, taking us past Gigabit Ethernet and into the era of Terabit Ethernet.
Teledyne LeCroy’s Terabit Ethernet solutions are engineered to help you take full advantage of this new technology cycle. The Xena Ethernet Test Platform gives developers of semiconductor, NEMs, and hyperscalers the solutions they need to validate next-gen silicon, network devices, and interconnects with confidence.
From Layer 1 signal integrity and Layer 2 traffic generation and analysis, we have the solutions you need to simulate, stress, and certify real-world performance. Support for 224Gbps electrical lanes, advanced FEC, and PCS diagnostics ensure readiness for tomorrow’s networks. Compact, desktop-friendly hardware combined with intuitive software and powerful automation ensure seamless lab-to-production workflows.
Whether you’re path-finding 1.6T or optimizing 800G deployments, Xena can fast-track your innovation cycle. Test smarter, deploy faster and reap the rewards.
- Image acquisition from Camera Link Base camera
- Supports Camera Link® operations up to 85MHz
- Supports 32/64-bit Windows platforms
- Quarter-length PCI Express x1 Board
- Power Over Camera Link® (PoCL) Compliant
- Offers external acquisition control signals on single PCIe x1 slotROHS compliant
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
-
Highest resolution – 12 bits all the time
-
More channels, flexibility – 8 analog and 16 digital channels
-
Longest Memory – 5 Gpt records with simple navigation – no compromise
-
View 16 channels on one display with OscilloSYNC™
-
Powerful, deep toolbox enables and simplifies complex analysis
-
MAUI with OneTouch user interface for intuitive and efficient operation
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)
Test & Measurement
Download Line Card
