-
The Narrow Linear Diffuse Light series is ideal for precision scanning of highly reflective materials.
-
The DL151 is available in a wide range of wavelengths and provides up to 28kLux at a 1” (25mm) standoff.
-
The extruded aluminum enclosure can be expanded in 2″ (51mm) increments from 2″ to 70″ (1778mm).
Teledyne LeCroy - High Voltage Differential Probes
The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.
Device Under Test | Recommended Model | Safety Class | Bandwidth | Cable Length | Tip Accessories Included |
120 V/240 V Half-Bridge Circuit Topologies | HVD3102A | 1 kV | 25 MHz | 2 m | Yes |
HVD3102A-NOACC | 1 kV | 25 MHz | 2 m | No | |
HVD3106A | 1 kV | 120 MHz | 2 m | Yes | |
HVD3106A-NOACC | 1 kV | 120 MHz | 2 m | No | |
380 V - 600 V Class Electrical Apparatus | HVD3106A | 1 kV | 120 MHz | 2 m | Yes |
HVD3106A-NOACC | 1 kV | 120 MHz | 2 m | No | |
HVD3106A-6M | 1 kV | 80 MHz | 6 m | Yes | |
Solar PV Inverter | HVD3106A | 1 kV | 120 MHz | 2 m | Yes |
HVD3206A | 1.5 kV | 120 MHz | 2 m | Yes | |
HVD3206A-6M | 1.5 kV | 80 MHz | 6 m | Yes | |
5 kV Electrical Apparatus | HVD3605A | 6 kV | 100 MHz | 6 m | Yes |
More Product Information
-
6000VA, 4500W, Global Wide Range, 1Ph 50 or 60Hz Isolated Input, 120 or 240 VAC 1Ph 60Hz Selectable Output, Freq Changer, 4U24, SNMP, w/ Anderson EBM, Double Conversion, Rugged, High Temperature, On-line UPS with External Battery
-
High Power Density up to 150KW in a single bay rack-mount cabinet. Up to 240KW in a dual bay rack.
-
Fast Load Transient Response: Protection from undesired voltage excursions
-
Fast Slew Rate with exceptional rise/fall times for speed-critical applications
-
Low Ripple Suitable for the most sensitive applications
-
Low Audible Noise Temperature controlled variable speed fans
-
High accuracy Voltage/current measurements without external DMMs
-
Modular architecture simplifies sparing and maintenance
-
Flexible Product Line
-
Low power DC modules
-
Low power AC modules
-
High power DC, 19" rack mounted loads
-
High power AC, 19" rack mounted loads
-
26 Total Models
-
-
Flexible Control
-
Remote: GPIB, RS-232, Analog
-
Manual: Front Panel
-
DC Modes: CC, CR, CV, CP
-
AC Modes: CR, CC with crest factor control
-
Dynamic mode with slew rate control
-
-
Flexible Data Feedback
-
GPIB, RS-232
-
Current monitor output (SLM DC only)
-
Front panel
-
-
High Power Density: up to 15 kW in 3U, 30 kW in a 6U chassis
-
Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
-
Fast Load Transient Response: Protection from undesired voltage excursions
-
Low Ripple and Noise
-
Hardware Trigger (Ethernet Option)
-
Parallelable up to 150 kW
-
Sequencing: Free system controller & speed up test
-
Low audible noise: Temperature controlled variable speed fans
-
Operates up to 32GT/s, PCIe 5.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2, Gen-3 and Gen-4 data rates of 2.5, 5.0, 8.0 and 16.0GT/s
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Integrates seamlessly with the Xgig software tools suite, including Expert™, for problem and performance analysis
A highly precise skew matching cable assembly with skew of 1psec or less between 2 cables, designed for digital transmission evaluation. Continuous operating temperature range: -30 to +85°C.
Exhibits low cable insertion loss and is suitable for high-precision differential signal transmission evaluation and measurement applications. 4 types of cables with different maximum usage frequencies (26.5GHz, 40GHz, 50GHz, and 67GHz) are available.
-
High efficiency: up to 81.6%,
-
low no load power consumption <95mW,
-
meets DoE efficiency level VI,
-
CoC version 5 Tier 2,
-
ultra-low leakage current ≤10μA,
-
IEC 60601-1-2, 4th edition ready,
-
wide operating temperature range 0 - 45°C,
-
isolation 2x MOPP,
-
double housing safety: snapped & welded,
-
IP42 approved interchangeable plug system as additional accessories,
-
IEC 60601-1-11 ready with IPX2 adapter
-
3000 VA, 2400 W, 120 VAC, 50/60 Hz Input and 120 VAC 50/60 Hz Output, Double Conversion Rugged High Temperature Isolated On Line UPS with Hot Swap Battery Drawer and Power Factor Correction for Military Applications
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)