Junkosha - 6 Series Cables - Precision Skew Matching
- A highly precise skew matching cable assembly with skew of 1psec or less between 2 cables, designed for digital transmission evaluation.
- Continuous operating temperature range: -30 to +85°C.
- Exhibits low cable insertion loss and is suitable for high-precision differential signal transmission evaluation and measurement applications.
- 4 types of cables with different maximum usage frequencies (26.5GHz, 40GHz, 50GHz, and 67GHz) are available.
|
Cable Type |
Maximum Usable Frequency |
Outer Cable Diameter |
Outer Cable Diameter (mm) |
Cable Weight (g/m) |
Continuous Operating Temperature (°C) |
Assembly Length |
||
|---|---|---|---|---|---|---|---|---|
|
@18.5 GHz |
@Maximum Frequency |
Minimum |
Maximum |
|||||
| MWX621 | 26.5 GHz | 1.2 | 1.4 | 6 | 65 | -30~+85 | 200 | 1500 |
| MWX641 | 40.0 GHz | 1.8 | 3 | 4.1 | 35 | 200 | 1500 | |
| MWX651 | 50.0 GHz | 2.1 | 3.8 | 3.7 | 29 | 200 | 1500 | |
| MWX661 | 67.0 GHz | 2.9 | 5.6 | 2.6 | 17 | 200 | 1500 | |
This table provides standard length availability within our catalog. We can provide custom lengths upon request; please contact us to discuss.
Features
- Skew between 2 cables of 1psec or less
- Skew matching for 2 or more cables is also available (optional)
Use
- High-precision differential signal transmission evaluation and measurement
Junkosha’s Method of Calculating Degree of Eye Pattern
To measure pulse wave transmission characteristics, an experimental tool called "eye pattern" is observed. Upon balanced transmission, skew (variability of propagation delay time) between the signal cables will become one of the causes of deterioration of the jitter. Our MWX6 series are designed and manufactured taking the above into consideration.
Document
More Product Information
- The SL162 is characterized as a High Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications.
- Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles.
- The spot light is designed with sufficient thermal management to provide 33kLux at a working distance of 4” (100mm).
- A very wide range of wavelengths from UV to IR are available.
- The BL128 Series provides a compact linear backlight solution ideal for space-constrained line scan applications.
- Its ultra-thin profile (less than ½”) minimizes vertical footprint, and bezel-free design along the length allows for placement of its emitting window right up to adjacent surfaces.
- While optimized for line scan setups, the BL128’s versatility extends to general-purpose machine vision lighting as a non-directional, highly diffuse bar light illuminator when needed.
- Eight channel, universal, 2-/4-wire RTD simulator
- Fast, monotonic, glitch-free resistance value programming
- Suitable for simulating resistors, platinum/copper/nickel RTDs
- Suitable for pulsed and continuous excitation inputs
- Direct temperature value programming
- Extensive triggering capability
- Synchronize level changes with input measurements to facilitate test sequencing
- High DC power density up to 150 kW in a single bay rack-mount cabinet. Up to 240 kW in a dual bay rack.
- Fast load transient response provides protection from undesired voltage excursions.
- Fast slew rate with exceptional rise/fall times for speed-critical applications.
- Low ripple suitable for the most sensitive applications.
- Low audible noise with temperature controlled variable speed fans.
- High accuracy voltage/current measurements without external DMMs.
- Modular architecture simplifies sparing and maintenance.
- High dispersion for reflective surfaces and shorter working distances.
- Provides a wider and more intense illumination area than the AL126.
- IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
- Available with polarization and diffusion light conditioning.
- This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 20″.
- Broadest Model Selection: 6kW, 9kW, 12kW, 18kW, 24kW, 36kW, Additional standard models above 36kW, up to 250kW, are available.
- Standard 60V, 120V, 400V, 600V, 800V and 1000V Voltage Ratings
- PLW Models Offer Ultra-compact Footprint and Boasts one of the industry’s highest power densities, 18kW in 2U.
- Anti-condensation: Intelligent Fully-integrated Temperature Control Circuit and Solenoid Valve
- Standard LabWindows and LabVIEW Drivers and SCPI Command Set
- RoHS Compliant
- Calibration-grade metrology standards
- Used for VNA calibration and/or calibration validation
Shielded, coaxial opens are used in the calibration of vector network analyzers to provide a nominal 180° phase offset from a compatible reference short over a wide range of frequencies. At these frequencies, open circuit terminations are inherently imperfect. Shielding the open essentially eliminates radiation loss, but creates a residual frequency-sensitive capacitance. An accurate knowledge of the open’s effective capacitance is essential to an accurate calibration of the analyzer. Maury opens are characterized for effective capacitance versus frequency by means of a fourth order polynomial curve fit, and the nominal capacitance coefficients are provided with each unit.
- Supports all cellular technologies compliant with 3GPP/3GPP2 UE RF TRX tests including LTE/LTE-Advanced, Cat-M1/NB-IoT, NTN NB-IoT, W-CDMA/HSPA, GSM/EGPRS, TD-SCDMA/HSPA
- Support LTE-Advanced Downlink Carrier Aggregation 5CCs SISO tests in one unit
- Supports LTE-Advanced Downlink Carrier Aggregation 2CCs 4x4 MIMO and 4CCs 2x2 MIMO tests in one unit
- Supports LTE-Advanced Downlink Carrier Aggregation 4CCs 4x4 MIMO and 6CCs 2x2 MIMO tests in two units
- Supports LTE-Advanced Downlink Carrier Aggregation 5CCs 4x4 MIMO tests in three units
- Supports VoLTE voice/video echoback tests
- Supports up to 6 GHz
- 160 MHz wide frequency bandwidth (Generator/Analyzer)
- Next generation GUI with large touch panel
- Backwards compatibility with the MT8820 series
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Monochrome (X-2620B) and color (X-2620C) models
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
Junkosha, Inc.
Website
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
