Teledyne LeCroy - High Voltage Differential Probes
The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.
Device Under Test | Recommended Model | Safety Class | Bandwidth | Cable Length | Tip Accessories Included |
120 V/240 V Half-Bridge Circuit Topologies | HVD3102A | 1 kV | 25 MHz | 2 m | Yes |
HVD3102A-NOACC | 1 kV | 25 MHz | 2 m | No | |
HVD3106A | 1 kV | 120 MHz | 2 m | Yes | |
HVD3106A-NOACC | 1 kV | 120 MHz | 2 m | No | |
380 V - 600 V Class Electrical Apparatus | HVD3106A | 1 kV | 120 MHz | 2 m | Yes |
HVD3106A-NOACC | 1 kV | 120 MHz | 2 m | No | |
HVD3106A-6M | 1 kV | 80 MHz | 6 m | Yes | |
Solar PV Inverter | HVD3106A | 1 kV | 120 MHz | 2 m | Yes |
HVD3206A | 1.5 kV | 120 MHz | 2 m | Yes | |
HVD3206A-6M | 1.5 kV | 80 MHz | 6 m | Yes | |
5 kV Electrical Apparatus | HVD3605A | 6 kV | 100 MHz | 6 m | Yes |
More Product Information
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (31 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
-
Camera and IEEE 1394b cable (other configurations on request)
-
Full control from oscilloscope through ProBus interface
-
Dc to 100 MHz bandwidth
-
Outstanding 100,000: 1 Common Mode Rejection Ratio (CMRR)
-
Gain of x1 or x10
-
Industry-leading overdrive recovery
-
Low noise
-
Selectable BW limiting
-
Two gain control modes when connected to a Teledyne LeCroy oscilloscope
-
Built-in precision Voltage Generator (PVG)
-
Comparator and true differential offset modes
-
Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
-
Modular design for high reliability and low maintenance
-
Closed box calibration using front panel controls - performed annually
-
Battery powered with percent of charge displayed
-
Maintenance codes displayed to aid in troubleshooting
-
Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
-
Large selection of aircraft specific interface cables readily available
-
High power density in 1U / 2U / 4U / 14U chassis up to 18kVA
-
Intuitive touch panel control
-
Innovative iX2™ current doubling technology
-
Multi-language display for global operation
-
Auto paralleling for higher power
-
Single phase 1U models and 1 or 3 phase selectable 2U / 4U / 14U models
-
Complete avionic test suites (optional)
-
ATE version available in 1U, 2U and 4U models
-
Standard LXI LAN, USB and RS232, optional GPIB
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
Operates up to 16GTps, PCIe gen-4 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
SFF-8674 host and target connections support PCIe links of up to 4-lanes
-
Multiple Interposers can be used with links to 16-lanes.
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer plus two cables for DUT attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal capture and triggering in multiple formats
-
Two coax cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and status
-
Size: (L x W x H): 112 x 150 x 30 mm (incl. rubber stands)
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data traffic
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
1500VA, 1000W, 115VAC, 50/60Hz input with 115VAC 50Hz/60Hz Output, Double conversion, Rugged, High Temperature, Isolated online UPS, 2 outputs, power factor correction and hot swap long life batteries
-
1500VA, 1050W, 120VAC 45-450Hz Input and 120VAC 60Hz Output, Double Conversion, On-Line, High Temperature, Isolated, Rugged IPC with Power Factor Correction for Military Applications
-
High Power Density : 3 kW and 4 kW models, 2U (3½” high), (19” wide); no top or bottom clearance spacing required
-
Preview Push-button : Overvoltage protection (OVP), voltage and current preview buttons
-
Remote Voltage Sense : Sense leads are easily connected to a solderless connector
-
Parallel or Series Operation Field configurable
-
Power Factor Correction ≥0.98 1 Ф 3kW
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)