• Manual or fixed focus
• TTL modulation up to 500 kHz
• Analog intensity control
• Optical output power up to 120 mW
• Wavelengths from 520 - 685 nm
• Industrial standard
• IP67

The ZM18 is an industry-grade laser module that, with its compact sensor-style design, integrates easily into existing machines and systems. Offering high flexibility its ZM18B and ZM18B3 Variants are suitable for a wide range of positioning applications. Machine vision applications across different industries are made possible due to its ZM18S3 Variant. Delivering non-stop reliable meassuring results. The built-in, user-friendly focusing optics allow quick adjustments to varying working distances and requirements. Thanks to its robust construction, the ZM18 is ideal for reliable continuous use in demanding industrial environments.

Flexibility

• Ideal for a wide range of applications such as RF, mm-Wave and sub-THz characterization, FA, DWC, MEMS, optoelectronic tests and WL
• Re-configurable and upgradable as requirements grow
• Minimizes setup times with no loss in performance or accuracy
• Seamless integration of various measurement instruments

Stability

• Solid station frame
• Built-in vibration-isolation solution for superior vibration attenuation
• Rigid microscope bridge
• Compact and rigid mechanical design
• Highly accurate measurement results
• Incorporates best-known methods

Ease of Use

• Ergonomic and straightforward design for comfortable and easy operation
• Low-profile design
• Simple microscope operation
• Quick and ergonomic change of DUT through pull-out stage
• Minimize training efforts
• Fast time to data
• Convenient operation

Southwest Microwave offers a broad family of SSBP multi-coax contacts and assemblies to address RF/microwave packaging miniaturization and flexibility challenges. These push-on coax contacts simplify interconnections and cabling while offering greater system reliability than the alternative of mating a large array of standard coax connectors. These SSBP coax contacts were designed to fit into standard off-the-shelf MIL-DLT-38999 and MIL-DTL-24308 D-Sub connectors and are interchangeable with standard signal contacts available in 20 HD, 20, 16, 12, 8 sizes to accommodate a variety of performance requirements.

Contact us for flexible cable assemblies and harnesses for OTS MIL-DTL-38999 series I, II, III, and IV or MIL-DTL-24308 D-sub connectors. All size 20 contacts are sold on cables.

• Single-slot 32 bit PCI Express module 
• IRIG A, B, NASA 36, 1 PPS sync inputs 
• HaveQuick sync input option 
• Propagation delay correction 
• Zero latency time reads 
• Match Time status / interrupt 
• IRIG-B time code output (option) 
• External Event time tag 
• User programmable heartbeat rate interrupt

• Red laser for long lines and best visibility
• Optical output power up to 60 mW
• Adjustable focus
• Large cooling surface for optimal heat dissipation
• Temperature-stabilized laser source (Peltier cooling)
• Integrated power supply with high immunity to interference
• Dimensions: Ø 40mm x 280mm

The ZPT-F is the only positioning laser worldwide with Peltier cooling and a temperature-stabilized laser source. This innovation guarantees consistently high visibility and precision, even in tough production environments. Thanks to the integrated heavy-duty power supply and adjustable focusing unit, installation into different machine setups is straightforward and flexible. Its rugged design and easy maintenance ensure long service life with minimal downtime. With a proven track record over many years, the ZPT-F delivers reliability and accuracy you can count on.

Comprehensive, Turn-key Integrated Measurement System (IMS) with Keysight A-LFNA for On-wafer R&D Advanced Low-Frequency Noise Measurements

• Ultra-long Holdover with improved ePRTC algorithm to provide up to 100 days of holdover within 100ns
• Jamming, spoofing detection
• High Accuracy White Rabbit PTP allowing sub-nanosecond time synchronization achievable through firmware upgrade, no additional hardware required
• 4x 10MHz Low Phase Noise (LPN)

• SPA available from 70KHz to 20/40/70/110/125/145 and 220GHz. Also available for banded configuration to 1.1THz.
• Dual SPA mode available: suitable for Mixers/Amplifier/ Harmonics /Spurious testing.
• SPA available on all ports. User can define which port to use as SPA port.
• Several detection types available in classical mode: Peak, minimum, RMS, Mean.
• Various math functions can be applied on SPA mode like Min hold/max hold/ user defined equations.
• Sources and receivers can be independently configured. Can be used as Tracking Generator.
• For units that have a dual source, a dual drive option is available. Support for external source control also possible.
• Phase synchronization for units with Dual source available. This feature allows users to control and configure the phase between the two sources.
• Source and receiver attenuator available with VNA can be activated in SPA mode. Recommendation to use option 62 (with attenuator on receiver side) for measuring the spectrum content of high-power devices.
• Software option: easy to install and upgrade existing user equipment.

• The BX2 Series of edge-lit backlights provides a highly diffuse source of illumination, packed within a thin and thermally efficient housing.
• The BX2 allows for configuration with polarization or collimation. A backlight configured with collimation is best suited for applications requiring a higher degree of edge clarity when imaging object silhouettes.
• This second edition of our edge-lit backlight series is more than twice as bright as previous BX and CX models.
• As with most planar backlight designs, this product is useful for edge detection, part location & orientation identification, presence & absence, hole detection and object gauging.