Product Finder

Displaying 1 - 30 of 57
Product Results:
AMETEK - Avionics ATE Power Subsystem - Power Subsystem for Transportable Military Test Stand

AMETEK - Avionics ATE Power Subsystem - Power Subsystem for Transportable Military Test Stand

Power Subsystem for Transportable Military test stand Provides eight channels of programmable DC power with output isolation function Output disconnect...
AMETEK - OEM DC Power System for Semiconductor Testing

AMETEK - OEM DC Power System for Semiconductor Testing

OEM 6 channel DC source Single Package 6-Pack of 600W power supplies Complete self-contained controller operates independently once pre-set...
AMETEK - Programmable High-Current (Copperhead) DC Power System

AMETEK - Programmable High-Current (Copperhead) DC Power System

Provides 15,000A DC at 5V DC in current mode Single complete package Integrated bus bars Current mode Analog programming...
AMETEK - Radar Power Bus Simulation

AMETEK - Radar Power Bus Simulation

Total power subsystem integration Power sequencing Elapsed time indication EMO function Custom rear output panel...
AMETEK - RS Series High power AC and DC Power Source

AMETEK - RS Series High power AC and DC Power Source

High Power AC and DC Power Source Programmable AC and DC power for frequency conversion and product test applications...
AMETEK - Thermal Vacuum Heater Power - TVAC satellite chamber

AMETEK - Thermal Vacuum Heater Power - TVAC satellite chamber

Total power subsystem integration Ethernet communication Full sub-system wiring Single P.O. Custom interface to suit...
AMETEK - Water Cooled Laser Power Current Source

AMETEK - Water Cooled Laser Power Current Source

Specially modified design allows: Air to water heat exchanger added to system True current source Fast transient response...
AMREL - PLA Series Air-Cooled Programmable DC Electronic Loads

AMREL - PLA Series Air-Cooled Programmable DC Electronic Loads

Broadest Model Selection: 800W to 7.5kW (higher power available up to 250kW Contact Factory) Exclusive Voltage Models: 10V to 1200V Multiple...
AMREL - PLW Series Water-Cooled Programmable DC Electronic Loads

AMREL - PLW Series Water-Cooled Programmable DC Electronic Loads

Broadest Model Selection: 6kW, 9kW, 12kW, 18kW, 24kW, 36kW, Additional standard models above 36kW, up to 250kW, are available. Standard 60V, 120V, 400V, 600V, 800V...
California Instruments - 3091LD Series 3000VA Programmable AC Loads

California Instruments - 3091LD Series 3000VA Programmable AC Loads

Multi-mode AC Electronic Load Flexible solution for a wide range of AC power test applications 3000 Watt Power Dissipation Master / Auxiliary configurations for...
California Instruments - Asterion AC Series - 1U/2U/4U High Performance Programmable AC and DC Power Sources

California Instruments - Asterion AC Series - 1U/2U/4U High Performance Programmable AC and DC Power Sources

High power density in 1U/2U chassis up to 3kVA. Intuitive touch panel control. iX2™ current doubling technology. Multi-...
California Instruments - BPS Series 30kVA - 180kVA High Power Programmable AC Source

California Instruments - BPS Series 30kVA - 180kVA High Power Programmable AC Source

High Power AC Source Programmable AC power for frequency conversion and product test applications Expandable Power Levels...
California Instruments - Compact i/iX Series 750 VA to 2250 VA, AC/DC Power Source

California Instruments - Compact i/iX Series 750 VA to 2250 VA, AC/DC Power Source

2250 VA of AC Output Power Combines AC/DC source and power analyzer Harmonic analysis of Voltage and Current AC, DC and AC+DC Output Modes Multiple Chassis...
California Instruments - CS Series 3kVA - 18kVA Programmable High Power AC Current Source

California Instruments - CS Series 3kVA - 18kVA Programmable High Power AC Current Source

Precision Current Source : Ideally suited for current protection device testing Single and Three Phase Modes : Built-in phase mode switch makes output...
California Instruments - CSW Series 5550VA - 33300VA High Performance Programmable AC and DC Power Source

California Instruments - CSW Series 5550VA - 33300VA High Performance Programmable AC and DC Power Source

Combination AC and DC Power Source 40-5,000Hz Output Frequencies Arbitrary and Harmonic Waveform Generation Built-In Digital...
California Instruments - CTS Series 3.2 - IEC Compliance Test Systems: 1250-15000VA Programmable AC & DC Immunity Compliance Testing

California Instruments - CTS Series 3.2 - IEC Compliance Test Systems: 1250-15000VA Programmable AC & DC Immunity Compliance Testing

Complete Test Solutions Complete test solutions for emissions and immunity compliance testing of AC and DC powered products...
California Instruments - i-iX Series II 3kVA - 15kVA AC/DC Power Source with a high performance power analyzer

California Instruments - i-iX Series II 3kVA - 15kVA AC/DC Power Source with a high performance power analyzer

3000 VA to 15000 VA of AC Output Power Combines AC/DC source and power analyzer Harmonic analysis of Voltage and Current...
California Instruments - Ls-Lx Series 3kVA - 18kVA Three Phase and Single Phase AC Power Source

California Instruments - Ls-Lx Series 3kVA - 18kVA Three Phase and Single Phase AC Power Source

Key Features Ls Series Backward Compatible with L Series Function and bus compatible with the California Instruments L Series...
California Instruments - MX Compliance Test System

California Instruments - MX Compliance Test System

Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers...
California Instruments - MX Series 15kVA - 135kVA High Output AC/DC Power

California Instruments - MX Series 15kVA - 135kVA High Output AC/DC Power

High Power AC and DC Power Source Programmable AC and DC power for frequency conversion and product test applications...
Elgar - Battery String Simulator (BSS)

Elgar - Battery String Simulator (BSS)

Available in single and dual pack versions Sensor simulation available to provide thermistor, strain gauges, heater loads, and cell bypass/short...
Elgar - ContinuousWave (CW) Series 800VA - 2500VA, Cost-Effective Low Profile AC Source

Elgar - ContinuousWave (CW) Series 800VA - 2500VA, Cost-Effective Low Profile AC Source

Wide range PFC Input Low THD and AC noise Advanced Measurement Available Field Parallel Configurable Multiple...
Elgar - ETS TerraSAS Standalone Photovoltaic Simulator

Elgar - ETS TerraSAS Standalone Photovoltaic Simulator

Low output capacitance High bandwidth up to 30kHz High resolution I-V curve simulates static and dynamic conditions Designed...
Elgar - GUPS Series 1920W Ruggedized Uninterruptible Power Supply

Elgar - GUPS Series 1920W Ruggedized Uninterruptible Power Supply

Ruggedized Wide (Global) Input On-Line Battery Back-Up Transient (Spike) Suppression Surge Suppression...
Elgar - ReFlex Power  DC High Power Module 1000W DC Power Supply

Elgar - ReFlex Power DC High Power Module 1000W DC Power Supply

Near Linear Power Supply Modular ≥0.95 PFC Digital control loop technology High Power Density (3.5 watts/...
Elgar - ReFlex Power 375–750W DC Load Module

Elgar - ReFlex Power 375–750W DC Load Module

High Voltage (500V) Input Digital control loop technology Two models: 375W & 750W Up to 750W/500V...
Elgar - ReFlex Power 875VA AC Power Source Module

Elgar - ReFlex Power 875VA AC Power Source Module

High Power Density (2 VA/cubic inch) Single or multi-phase output Parallel operation 4.8 Crest factor Digital...
Elgar - ReFlex Power Chassis

Elgar - ReFlex Power Chassis

Modular Control up to 95 assets Control multiple AC and DC power supplies and loads in one mainframe Create “virtual...
Elgar - ReFlex Power DC Low Power Module 330W DC Power Supply

Elgar - ReFlex Power DC Low Power Module 330W DC Power Supply

Near Linear Power Supply Modular ≥0.95 PFC Digital control loop technology High Power Density (3.5...
Elgar - ReFlex Power Ethernet Enabled Controller Module

Elgar - ReFlex Power Ethernet Enabled Controller Module

10/100 base-T Ethernet connectivity Digital control loop technology IVI compliant drivers Web browser control...

Pages


  • Lightweight, portable, and fast
  • Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
  • True reference thermometry with accuracy to ±0.01 °C
  • On-board automation and documentation
  • Metrology performance in accuracy, stability, uniformity, and loading


The 4180 Series of Precision Infrared Calibrators for infrared thermometers and thermal imagers is fast, accurate, and easy to use. It comes with an accredited calibration from one of the world’s most trusted temperature calibration laboratories, sample calibration procedures for Fluke thermometers built right in and everything you need to get started making high-quality infrared thermometer calibrations. This is the perfect solution for any infrared thermometer or thermal imager within its temperature range.
The 4180 reaches temperatures from –15 °C to 120 °C and the 4181 has a temperature range from 35 °C to 500 °C. Uniformity is important in infrared temperature calibration work because an infrared thermometer will “see” as much as the entire target when placed at the appropriate calibration distance.
In addition, with accuracies as good as ±0.35 °C the 4180 Series can meet its specifications without additional emissivity-related corrections, leading to legitimate test uncertainty ratios (TUR) as good as 4:1.


  • Ideal Digital Multimeter for “go/no-go” testing
  • Features AutoVolt automatic AC/DC voltage selection
  • Includes low input impedance to help prevent false readings due to ghost voltage
  • Presents a large white LED backlight for working in poorly lit areas
  • Measures resistance, continuity, frequency, and capacitance
  • Provides Min/Max/Average with elapsed time to record signal fluctuations


Double your productivity or cut your calibration time in half
  • Temperatures from –15 °C to 350 °C in one unit
  • Two wells in each block for simultaneous comparison calibrations
  • Rugged, lightweight, water-resistant enclosure
You’ve been asking for it and now we’re making it for you. Hart’s new Model 9009 Industrial Dual-Block Calibrator lets you calibrate at hot and cold temperatures at the same time. Double your productivity or cut your calibration time in half—either way you look at it, your in-field temperature calibrations just got easier.


  • Single Input digital thermometer with data logging for lab, QA, process calibration, food safety and HVAC
  • Logs up to 500 points of data at user adjustable recording intervals
  • Measures J, K, T, E, R, S, and N-type thermocouples
  • Presents results in °C, °F, or Kelvin (K) on a large backlit display
  • Provides a recall function to easily review logged data