Absolute EMC - Low Frequency Immunity
See "Specifications & Details" for more information.
|
The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane. |
|
Absolute EMC offers an assortment of injection test kits for the use of conducted immunity. The kits can be used with many available conducted immunity systems, including the Schlöder CDG 7000, to make selection and setup easy. All calibration fixtures, injection clamps, attenuators, and termination resistors necessary for meeting the requirements of conducted immunity systems. All all-in-one systems are covered. |
|
Low-profile 12'×10' floor plane with matching vertical wall (up to 12'×10') in galvanized steel. |
|
Staggered two-layer floor design: wide metal-to-metal overlap, ultra-low impedance, almost zero step height. |
|
Fast install (1–2 days) with full bonding/continuity verification to the building ground or a shielded room. |
|
Engineered to meet IEC 61000, CISPR, and MIL-STD-461 ground-plane requirements. |
|
Custom sizes/materials (steel, aluminum, copper), edge ramps, LISN pads, and cable trenches available. |
|
Delivers repeatable EMC/ESD results by minimizing loop impedance and stray coupling paths. |
More Product Information
-
Unique Air Coplanar tip design with choice of beryllium copper (BeCu) or tungsten tip material
-
DC to 110 GHz models available in single and dual line versions
-
Low insertion and return loss with ultra-low-loss ( -L ) versions
-
Excellent crosstalk characteristics
-
Wide operating temperature -65 ° C to + 200 ° C
-
Wide range of pitches available, from 50 to 1250 µm
-
Individually supported contacts
-
Reduced contact (RC) probe tips for small pads
-
BeCu tip provides rugged, repeatable contact on gold pads
-
Trigger over Ethernet
-
Piecewise Linear HDR feature
-
IEEE 1588 PTP
-
Ultra-compact design
-
Monochrome (G-030B) and color (G-030C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
See the Modular Concept for lens mount and optical filter options.
See the Customization and OEM Solutions webpage for additional options.
See the Customization and OEM Solutions webpage for additional options.
Our patented miniaturized L/S/C Tri-Band Feed delivers top-notch performance and unmatched flexibility.
Equipped with a common L/S/C radiating front end, it’s complemented by a modular set of active RF modules, enabling simultaneous reception and tracking across various frequency bands. Its compact, lightweight design allows it to be mounted on any dishes ranging from 6 to 24 feet.
Available in single, dual, or tri-band configurations, this feed offers the best value for customers looking to meet current requirements while staying future-ready.
It’s also field-upgradable to add any missing bands with straightforward RF module additions, ensuring scalability while keeping costs in check.
-
Versatile 9.2 megapixel camera
-
10.1 fps at full resolution
-
Power over Ethernet option
-
Video-iris lens control
-
Monochrome (G-917B) and color (G-917C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
Safran Ground Station is a turnkey ground segment solution with all required equipment and ground tools to proceed with removable media preparation and post-mission data retrieval and replay.
Key components are:
- Rugged Heavy duty Laptop PC for military environment
- RMM (Removable Memory Module) Docking Stations capable of reading up to 4 cartridges simultaneously, especially useful for mass debriefing.
- Ground software suite (RMM Manager, eZ Viewer, MUST), very intuitive and user-friendly interface, for replay and exploitation of data while allowing customizable configuration of the display for mission debriefing.
- Ruggedized Trolley Suitcase specifically adapted for the transport of the whole Ground Station.
This ground station, tested and approved by Safran before delivery, helps to accelerate the deployment on every integration Labs, Air Bases, and can be safely transported between different locations and environments
- Power bypass inductance: 8 nH
- Standard DCQ probes have flat tip needles available in nickel-plated tungsten or BeCu with diameters of 0.75 mil, 1.0 mil and 1.5 mil.
- Supports collinear and non-standard needle configurations
- Up to 16 DC for standard; maximum of 24 DC for custom
- Ideal for probing the entire circuit for functional test
- DC probes can provide power or slow logic to circuit under test
-
Sony IMX273 CMOS sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-158B) and color (G-158C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
- 1-port VNA with frequency options from 150 kHz to 6 GHz
- External PC control enables control of multiple ShockLine MS46121B devices in parallel for excellent multisite throughput
- Very compact package allows for direct connection to the DUT
- Scalar transmission measurements in a (1-to-1) or (1-to-n) configuration
- No on-board data storage eliminates the need for data purging in secure applications
- Standard bandpass time domain with time gating enables easier and faster fault identification
- A common GUI interface within the ShockLine family reduces switching costs between models
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (31 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
Scope of delivery
-
Camera and IEEE 1394b cable (other configurations on request)
Absolute EMC
Absolute EMC LLC is a premier North American provider of electromagnetic compatibility (EMC) expertise and test equipment. They deliver end to end consulting—covering IEC, MIL STD, CISPR, and automotive standards—hands on training for all EMC and RF test instruments, and turnkey test system design and integration. Leveraging decades of experience with every major manufacturer and the latest technologies, they also offer strategic guidance on equipment selection, market trends, and procurement to help you maximize the performance and ROI of your EMC investments.
Contact Details
Absolute EMC LLC
8240 Rugby Road, Manassas Park VA 20111, USA
Phone: 585-924-4450
Email: info@absolute-emc.com
Test & Measurement
Download Line Card
