Our Standard Intensity Linear Backlights provide rugged construction for demanding environments.
Advanced Illumination - BL193 Series Standard Intensity Linear Backlights
-
Our Standard Intensity Linear Backlights provide rugged construction for demanding environments.
-
Standard intensity illumination with low power input requirements.
-
Multiple wavelengths available with very consistent illumination over the entire active area.
-
Available in 1” (25mm) increments with lengths up to 80.5” (2044mm).
General Specs
Group 1 (Low-Risk) Applicable Wavelengths: 470, 520, 660, WHI
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part No Key
CAD Files
More Product Information
-
IRIG A & B, NASA 36 and 1 PPS inputs standard
-
HaveQuick sync option
-
Propagation delay compensation
-
Zero latency time reads
-
Match Time output
-
IRIG B time code output
-
External Event time tags
-
On-board GPS receiver option
-
User programmable heartbeat rate
-
Application flexibility: Coax, Triax, RF/mmW, High Power, Double Sided
-
Temperatures range from -60°C to +300°C
-
Up to 25% lower air consumption (CDA) than other systems on the market with no compromise in transition times
-
Low Thermal Resistance Technology
-
MultiSense with multiple temperature sensors
-
Isolated from ground
-
Includes a jack for grounding and biasing
-
Advanced wafer vacuum system for warped/partial thin wafers
-
Provides uniform vacuum across the entire wafer surface
-
Advanced shielding technology
-
Eliminating all but a narrow band of light (+/- 40nm) centered on the specified wavelength, band pass filters are used to enhance colors, or to stop unwanted ambient light from reaching the camera.
-
Filtering can replace existing shrouds, simplifying the physical set up of an inspection site.
-
Ai offers 660nm and 635nm band pass filters to fit a number of different lens sizes.
-
The compact design of the DL2230 is easy to integrate into machine vision applications that require a space saving lighting design.
-
The housing of this Extra Small Dome Light has an outer dimension of 2.83” (71.9mm) and an inner, working diameter of 1.95” (49.5mm).
-
Back-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects.
-
Two aperture diameters are available, .88” (22.3mm) and 1.75” (44.5mm).
-
For similar performance in a thinner housing, refer to our Edge-lit Flat Diffuse Lights (FX Series).
-
Available in visible and infrared wavelengths with an optional polarizer.
-
Provides light intensities of up to 11.7kLux at 4” (102mm) standoff.
-
Pre-engineered, expandable sizes are available from 3”x 3” (76mm) to 22”x 34” (559 x 864mm) in 1” (25mm) increments.
-
The RL3940 is characterized as a Folded Beam Dark Field ring light.
-
Precisely aimed LEDs, along with an aluminum beam folder, provide a specific and repeatable light pattern on the imaging plane.
-
The light provides up to 11kLux at a working distance of .6” (15mm).
-
The RL3940 is available in a wide range of wavelengths from UV to IR.
-
The folded-beam configuration provides dark field illumination in a compact 3.9” (100mm) housing.
-
The housing’s large inner diameter can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional mounting ring.
-
The Pulsar 320E provides the ultimate in lighting control for strobe-only, high power applications.
-
2 outputs for controlling 2 lights independently, each capable of 50A @ 100V DC.
-
NOTE: If you’ve purchased a Pulsar 320 in the past, please see the change notice below for details on what updates have been made to the Pulsar series.
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636