-
Back-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects.
-
Two aperture diameters are available, .88” (22.3mm) and 1.75” (44.5mm).
-
For similar performance in a thinner housing, refer to our Edge-lit Flat Diffuse Lights (FX Series).
-
Available in visible and infrared wavelengths with an optional polarizer.
-
Provides light intensities of up to 11.7kLux at 4” (102mm) standoff.
-
Pre-engineered, expandable sizes are available from 3”x 3” (76mm) to 22”x 34” (559 x 864mm) in 1” (25mm) increments.
Advanced Illumination - DCS-MP Manual Dimming Accessory
-
Detented, 30 position potentiometer for repeatable dimming
-
Built in DIN-rail or panel mounting feature
-
Flip up cover for potentiometer to prevent accidental adjustments
-
Spring clamp wiring terminal for vibration proof installation
General Specs
Mechanical Specs
Electrical Specs
Part No Key
CAD Files
More Product Information
-
Our White High Intensity Linear Backlights offer 540 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
-
Available in white only. For additional wavelengths please refer to our BL138 series.
-
The SL147 is characterized as a 2×2 Spot Light with the necessary optics to project light over longer distances.
-
Ideal Illumination for medium working distances.
-
The spot light is available in a very wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available as well as several lens choices.
-
A washdown version is also available as an option.
-
The SL147 provides 88kLux at a working distance of 4” (100mm).
-
Convenient mounting with an M4 nut channel.
-
Backward Compatible with L Series
-
Function and bus compatible with the California Instruments L Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Transient Programming
-
Test products for susceptibility to AC line disturbances
-
-
Built-in Measurements
-
Performs voltage, current, and power measurements
-
-
Advanced Features
-
Arbitrary waveform generation, harmonic analysis, GPIB interface are some of the available options
-
-
Interface
-
Standard USB & RS232C interface.
-
Optional GPIB & LAN available
-
-
CE Marked (400V input model ONLY)
-
Safe, reliable, and consistent operation
-
Key Features Lx Series
-
Backward Compatible
-
Compatible with HP6834B & iL Series AC Sources Function & bus compatible with the Agilent HP6834B & California Instruments iL Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Arbitrary Waveform Generator
-
Test products for harmonics susceptibility
-
-
Built-in Power Analyzer
-
Performs voltage and load current harmonic analysis and waveform acquisition
-
-
Standard IEEE-488, USB & RS232
-
Remote control interface for ATE system integration include
-
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
-
Characterized as a Dual Function Ring Light, the RL5064 is capable of both bright and dark field illumination with independent control (depending on control option).
-
A wide variety of wavelengths may be specified from UV to IR.
-
The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional 3 point mounting barrel.
-
The RL113 High Intensity Bright Field ring light offers a very wide array of wavelengths from UV to IR.
-
With intensities of up to 45.5kLux at 12” (300mm), the RL113 is particularly well suited to longer working distances.
-
A rugged, heavy enclosure, compliant with IP67 requirements, is well suited to demanding environments.
-
The RL36120 is characterized as a Large Aimed Bright Field ring light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The ring light is available in a wide range of wavelengths from UV to IR, including a 3 channel RGB version. Diffuser and polarizer options are also available.
-
The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional mounting ring.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636