-
The SL2420 is characterized as a Medium Aimed Spot Light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The spot light is available in a wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available.
-
The SL2420 provides 10.1kLux at a working distance of 4” (100mm).
Advanced Illumination - SL2420 Medium Aimed Spot Light
General Specs
Group 1 (Low-Risk) Applicable Wavelengths: 470, 520, 625, 660, WHI
Group 2 (Moderate-Risk) Applicable Wavelengths: 395
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part No Key
More Product Information
-
Designed for machine vision applications that require broad illumination over a wide area with controlled fall off.
-
This BALA (Broad Area Linear Array) bar light series is expandable in 1″ increments up to 82″.
-
Applications requiring an even wider area of illumination can utilize two BALA bar lights aligned in parallel, facing each other.
-
AL150 derivatives include AL4424 (4″), AL4554 (9″) and AL46120 (20″) (which represent legacy part numbers)
-
Provides precise storage I/O and TCP or UDP generation with full traffic flexibility and control
-
Accelerates Xgig® root-cause analysis through automatic triggering and advanced tracking of anomalies and errors
-
Enables auto-discovery of devices and automation of all remote testing and validation processes across complex network topologies
-
The DF241 is characterized as a Small Low Angle Dark Field ring light.
-
Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
-
A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator.
-
With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view.
-
A 25mm field of view is standard with an optional field of view of 35mm.
-
Available in a range of wavelengths from UV to IR.
-
*Engineered to provide comparable optical characteristics to our previous RL1360.
-
Network Enabled Frequency Distribution Amplifier
-
Dual Frequency Inputs with Auto Failover
-
Low Phase Noise Reference Frequency Outputs
-
Programmable per channel amplitude
-
1U 19” rack mount
-
Redundant Hot Swappable Power Supplies
-
The SL2507 is characterized as a Small Aimed Spot Light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The spot light is available in a wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available.
-
The SL2507 provides 2.6kLux at a working distance of 4” (100mm).
-
The DF242 is characterized as a Large Low Angle Dark Field ring light.
-
Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
-
A scratch on a sheet of glass is a good example of a defect that can be detected easily with a low-angle dark field illuminator.
-
With a light intensity of 24kLux at a working distance of 1” (25mm), the DF242 is perfect for imaging problems with medium sized fields of view.
-
A 35mm field of view is standard with optional fields of view of 45 and 70mm.
-
Available in a range of wavelengths from UV to IR.
-
*Engineered to provide comparable optical characteristics to our previous RL1660.
-
The RL3940 is characterized as a Folded Beam Dark Field ring light.
-
Precisely aimed LEDs, along with an aluminum beam folder, provide a specific and repeatable light pattern on the imaging plane.
-
The light provides up to 11kLux at a working distance of .6” (15mm).
-
The RL3940 is available in a wide range of wavelengths from UV to IR.
-
The folded-beam configuration provides dark field illumination in a compact 3.9” (100mm) housing.
-
The housing’s large inner diameter can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional mounting ring.
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
-
For use with the SL256 Pattern Projecting Spot Lights
-
Five field-replaceable standard patterns available
-
0.050mm line width photolithography
-
Reticles include spanner wrench
-
Please contact Ai for custom reticle patterns
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636