-
This High Intensity Spot Light is engineered for long throw and high brightness illumination.
-
Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm.
-
Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm).
-
Available in a wide range of wavelengths.
Advanced Illumination - SL246 High Intensity Spot Light
General Specs
Group 1 (Low-Risk) Applicable Wavelengths: 455, 470, 505, 530, 590, 625, 660, 730, WHI
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part No Key
More Product Information
Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.
We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.
These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.
These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.
-
Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
-
Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
-
-156 dBm/Hz Displayed Average Noise Level (Typ.)
-
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
-
Total Amplitude Accuracy < 1.2 dB
-
1 Hz Minimum Resolution Bandwidth (RBW)
-
All-Digital IF Technology
-
Standard Preamplifier
-
Distance to fault capability using VNA time domain analysis
-
Up to 1.5 GHz Tracking Generator Kit
-
Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
-
EMI Pre-compliance Test Kit (Opt.)
-
10.1 lnch WVGA (1024 x 600) Display
-
0 – 100% intensity control
-
For use with lights built with an ICS 2 after 3/1/2012
-
NOT COMPATIBLE with LLI37, BLI38, LLI67, and BLI68 “IC” Lights
-
High dispersion for reflective surfaces and shorter working distances.
-
Provides a wider and more intense illumination area than the AL126.
-
IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
-
Available with polarization and diffusion light conditioning.
-
This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 20″
-
4 Independent Channels, 1 Output Connector
-
Includes built-in pre-programmed sequencing.
-
Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
-
Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
-
Housed within a compact enclosure with DIN rail mounting.
-
Driven with SignaTech™ for improved safety and easy operation.
-
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
-
The AL143, 2×3 Spot Light is available in a wide range of wavelengths with multiple lens options.
-
Ideal Illumination for medium working distances.
-
Convenient mounting with an M4 nut channel.
-
Washdown version is available
-
The RL1424 is characterized as a Small Aimed Bright Field ring light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The RL1424 is available in a wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available.
-
The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with a variety of mounting options.
-
All Digital IF technology
-
10.1” WVGA (1024 x 600) Display
-
Frequency range from 9 KHz up to 3.2 GHz
-
-161 dBm/Hz Displayed Average Noise Level (Typ)
-
-98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
-
Total Amplitude Accuracy < 0.7 dB
-
1 Hz Minimum Resolution Bandwidth (RBW)
-
Comes with standard Preamplifier and Tracking Generator Kits.
-
Optional Reflection/VSWR, Advanced Measurement Kit and EMI Pre-compliance measurement kits.
Advanced Illumination’s AD-I3-CGX2 adaptor cable is for connecting I3/I3S configured lights with Cognex Gen2 Cameras. By default, an I3/I3S controller can connect directly to a Cognex Gen1 Camera but needs this adaptor to connect to a Cognex Gen2 Camera.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636