Brandywine - Time Displays: Digital and Analog Clocks with GPS
- Digital Clock Automatically Synchronizes with NTP servers over Ethernet Network
- 0.5”, 3.2” or 5” display sizes
- Remote network management
- Time Zone and Daylight Savings support
- Multiple colors
- Optional Network Time Server version with built-in GPS receiver
- Optional built-in IRIG B time code reader
Digital and Analog Clocks with GPS
Brandywine Communications designs and manufactures many different sized and shaped precise Time Displays – We offer both digital and analog clocks to meet and fit your requirements with options such as IRIG-B, GPS or NTP synchronization. Brandywine’s time displays also have optional date messages with sizes ranging from 6 inches up to 8 feet in size. All Brandywine time displays feature SNMP management for easy maintenance and use. With an impressive engineering facility in the U.S., we specialize in customizing precision clocks to fit your specific needs.
Our time displays are maintenance free and are used in many different prominent international locations and applications across the globe, including hospitals, schools, train stations, and airports.
Brandywine carries an extensive line of time displays and clocks that are synchronized over an Ethernet network using the NTP protocol. These digital clocks are simple to install and use and are very accurate for critical timing needs such as hospitals and airports. Advanced technology time displays eliminate the need for expensive coaxial cable installations; a Power Over Ethernet (POE) network drop is all that is required. Using the browser interface simply enter the IP address of the time source, one of the Brandywine Network Time Servers, or any other source of NTP time and you are ready to go. Brandywine’s time displays have a full comprehensive selections whether you need large digital display clocks, clocks in a large variety of colors, to display configurations and digit sizes are available. Many of our clocks include GPS synchronization for higher accuracy. We also will customize your clock to fit your specific needs.
Time and Message Displays
Brandywine Communications offers a comprehensive line of Time and Message displays. Various form factors such as desk mount, rack mount or wall/ceiling mount are available. Most are available with IRIG, GPS, NTP or impulse synchronization. Digit sizes from .55 inches to 20 inches are available. These advanced display products offer the utmost in reliability, viewing and ease of installation. One or more of the following input synchronization sources can be specified:
- GNSS
- IRIG/AFNOR
- Impulse
Applications for Brandywine’s time and message displays include Instrumentation systems, security systems, range control rooms, computer/ communication centers, power utility centers, hospitals, schools, train stations, and anywhere needing accurate clocks that have the ability to synchronize to either a system or a network of clocks.
Our clock displays are designed to use Power Over Ethernet for minimal cable runs.
Application
Application
More Product Information
- High performance GPS disciplined Time/Frequency standard
- Ethernet Interface for management and control
- Network Time Protocol (NTP)
- Multiple 1PPS outputs with individual delay compensation
- Multiple Low Phase Noise 10MHz outputs with software programmable level
- Time Code outputs including Have Quick, IRIG A, IRIG B, IRIG E, IRIG G
- Sync to GPS or to Have Quick/1PPS per ICD-GPS-060
- Choice of internal disciplined OCXO or Rubidium Oscillator
The APEX Turbine Data System (DS) is the next generation of data acquisition, control, setup, and online analysis. It reliably acquires time-synchronized data from a network of digitizers, regardless of sample rate or sensor type.
- The DL225 series of square coaxial lights features a modular heat sink and circuit design for enhanced performance, product availability and lead time.
- These coaxial lights are available in a wide variety of wavelengths from UV to IR.
- They provide intensities from 18kLux for the DL225-025 to approximately 50kLux for the larger models.
Image optimization features:
-
Auto gain (manual gain control: 0 to 22 dB)
-
Auto exposure (manual exposure control: 100 µs to 1 s, 1 µs increments)
-
Binning (horizontal and vertical) (sum)
-
Decimation X/Y
-
Enhanced Defect Pixel Correction (DPC)
-
Fixed Pattern Noise Correction (FPNC)
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI)
Camera control features:
-
EF lens control (order option -18)
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
- Smallest rotary stage: 11.75 x 21.9 x 16 mm
- Embedded closed-loop controller
- No separate electronics needed
- 3.3 VDC input
- Accepts direct motion commands (I2C, SPI, or UART)
- Continuous 360° rotary motion
- Angular resolution ~21.9727 mdeg closed loop
- Built-in absolute position sensor
- Millisecond step and settle times
- 0.5 deg in 16 ms closed loop
- 0.5 deg in 1.2 ms open loop
- Holds position with zero power and no jitter
-
0.01° phase shift accuracy
-
15 - 1000 Hz output
-
Built-in multimeter for transducer calibration
-
Floating current output for 3-wire power meters
-
Voltage from Current function
- Up to 96 differential channels per full rack mainframe
- Constantly monitor input signals for fault conditions
- Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
- Inputs can be masked, inverted, and combined to produce interrupts
- Can be used as a time stamp module and as a digital I/O
- Programmable debounce circuitry prevents erroneous readings
- 10 V and 100 V input ranges
- On-board memory stores events with IEEE 1588 timestamps
- Synchronize reading of input states with other scanned analog channels
- Reduce flash programming times
- SPI, QSPI, parallel NOR flash devices supported
- Support for NAND flash devices available on request
- Shortened development cycles
- No need for additional equipment
- Can be used for fast firmware upgrade
- No FPGA development required
- The RL4260 is characterized as a Medium Aimed Bright Field ring light.
- Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
- A range of standoffs and fields of view may be specified at the time of order.
- The ring light is available in a wide range of wavelengths from UV to IR, including a 3 channel RGB version.
- Diffuser and polarizer options are also available.
- The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
- The light can also be ordered with an optional mounting ring.
Brandywine Communications
Brandywine Communications Inc. offers superior products to the time and frequency marketplace. Our mission is to provide the finest equipment coupled with excellent before and after sale service. Our staff of dedicated professionals, based in Tustin, CA, represents over 100 years of collective experience in design, manufacturing and sales of precision time and frequency products. Many of our products are made here in the United States, which allows for quick turnarounds and custom design.
Products from Brandywine Communications range from components such as Oven Controlled Oscillators to complete timing systems like the top of the line High Performance Timing System (HPTS).
Several state-of-the-art time and frequency systems are available from Brandywine. The system product line includes single and dual-redundant models, GPS synchronization and a wide range of oscillator choices: TCXO, OCXO, high-stability OCXO and Rubidium types. GPS choices include both C/A code and SAASM models.
Brandywine also is the premier North American distributor of Oscilloquartz, a subsidiary of ADVA Optical Networking. Oscilloquartz is a premier synchronization supplier for telecommunications for wireline and wireless infrastructures throughout the world. This partnership creates a powerhouse of timing and telecommunications that expand Brandywine's services to their customers in the US and Canada.
We supply several major market segments including: Aerospace, US and Municipal governments, telecommunications, US military, power utilities, financial institutions, test ranges, automotive industry, healthcare and schools.
Brandywine Communications, Inc. is certified as a Small Business Organization with the United States Small Business Administration (SBA’s 8(a) Certification Program) and is registered on the System for Award Management (SAM.gov) website which makes us eligible for all awards or grants specified under this provision.
Contact Details
Brandywine Communications Inc. - Ultra-Precision Time & Frequency
2921 Daimler Street, Santa Ana, CA 92705, USA
Phone: +1-714-755-1050
Email: support@brandywinecomm.com
Embedded
Download Line Card
Document
