-
4 Independent Channels, 1 Output Connector
-
Includes built-in pre-programmed sequencing.
-
Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
-
Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
-
Housed within a compact enclosure with DIN rail mounting.
-
Driven with SignaTech™ for improved safety and easy operation.
-
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
FRIWO - Coaxial connectors - Angled coaxial connectors 1,7X4,0X11
Additional information
- Length: 11 mm
- Inner Diameter: 1,7 mm
- Outdoor Diameter: 4,0 mm
- Shape: Angled
More Product Information
-
High efficiency: up to 86.9 %
-
Low no load power consumption < 90 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60601-1-2, 4th edition
-
Ultra-wide operating temperature range 0 - 50°C
-
Isolation 2x MOPP
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
IEC 60601-1-11 ready with IPX2 adapter
-
New release with 5000 m altitude
-
Cap for: LT10, LT20, LT40, LT60, LT100, DIMMbox
-
High efficiency: up to 88 %
-
Low no load power consumption < 100 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60950-1
-
Wide operating temperature range 0 - 45°C
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX30-F
-
The SL112 is characterized as a Medium Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications.
-
Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles.
-
The spot light is designed with sufficient thermal management to provide 22kLux at a working distance of 4” (100mm).
-
A range of visible wavelengths are available.
-
Advanced MicroVac chuck surface for minimum contact resistance between wafer and chuck
-
Safety-rated interlock system for high-power testing (meets EN 60947-5-1, EN 60204-1)
-
Supports fully automated testing up to 10kV by eliminating arcing point
-
Full wafer access via locking roll-out stage
-
On-wafer power device characterization up to 10,000 V DC / 600 A
-
Coaxial, triaxial, and pin jack feed-troughs available
-
Convenient instrument connection kits
-
Load/unload wafer to hot/cold chuck (-60° C to +300° C)
-
Up to 15% faster transition times than other systems in the market
Southwest Microwave’s high performance End Launch connectors are designed to provide low VSWR, mode free wideband response to 110 GHz for single-layer and multi-layer printed circuit boards where the high frequency signal is on the top layer. Available in SMA (27 GHz), 2.92 mm (K) (40 GHz), 2.40 mm (50 GHz), 1.85 mm (V) (67 GHz) and 1.0 mm (W) (110 GHz).
Male and female options along with narrow body and bulkhead feed-through. Unique clamping mechanism accommodates board thickness up to .300” (7.62 mm). Robust, reusable and repairable. Multiple launch configurations provide the best possible match to circuit layout. Works on microstrip and grounded coplanar waveguide (GCPW) designs. Signal-layer microstrip and GCPW test boards available. Soldering is optional.
Design Assistance:
- Printed circuit board layout and connector part number recommendation
- 3D models for mechanical layout
- HFSS models (version 18.0 or newer) for EM simulations upon request and availability
-
3000VA, 2.1KW, 115 VAC 50/60 Hz Input, 115 VAC, 60 Hz Output, Frequency Changer, Galvanic Isolation, Power Factor Corrected, Rack Unit, 3U High x 19" Wide x 16.75" Deep, Panel Mounted Power Connectors, Rugged, Double Conversion UPS, to Provide Power Conditioning and Battery Hold-up for Shipboard Applications
1.35 mm (E) DC to 90 GHz connectors from Southwest Microwave include a new Solderless Vertical launch connectors are designed for microstrip or grounded coplanar boards. They provide optimal signal integrity, are reusable and are installed without soldering. Suitable for various board materials and thickness.
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com