-
The SL2420 is characterized as a Medium Aimed Spot Light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The spot light is available in a wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available.
-
The SL2420 provides 10.1kLux at a working distance of 4” (100mm).
FRIWO - LT40 LED Driver - 10-24V / 0-1460mA EU
Product information "LT40"
Whether minimum housing cross sections, anti-vandalism in-wall installations or safety class IP67 for damp and dusty environments – with our technically leading LED drivers you are always on the safe side. In compliance with various standards such as CE, ENEC or EN61347 we realize current and voltage control in a single device and enable a comfortable lighting control via DALI or PushDIM with our DIMMbox.
If our standard program does not meet your requirements, your particular output values can be adjusted by laser trimming. Find now your tailored solution together with our specialists!
Additional information
- Output voltage: 24 V
- Family : LT40
- Current: 1460 mA
- Output voltage tolerance: +2% / -2%
- Frequency: 50 / 60 Hz
- AC Input: connecting bracket 0,5...1,5 mm²
- Humidity: 10%- 95%
- Working temperature: 0°C - 45°C
- Standard 2: EN61347-2-13
- Standard 1: EN61437-1
- Storage temperature: -40°C - 70°C
- MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic )
- Unit: LED
- Input current: 180 mA
- DC output: connecting bracket 0,5...1,5 mm²
- Input tolerance: +10% / -10%
- Input voltage: 220-240 V
- Spec.0 cover sheet FW-Type: LT40-24/1460
- Protection Class: II
- color: WH
- Country version: EU
More Product Information
- The fourth generation of Ai’s popular Inline Control System.
- High Output Power: Capable of delivering 2.1 amps of continuous output and up to 8 amps in overdrive strobe at 24V, outperforming all other inline controllers on the market.
- Compact & Rugged: Sleek enough to fit through wiring conduit with its compact anodized aluminum housing and sealed to IP68 standards for prolonged liquid immersion and complete dust protection.
- Plug-and-Play Functionality: Enabled with SignaTech™, allowing for simplicity when overdriving, without risk of damage to the lighthead.
-
Sony IMX264 CMOS sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-507B) and color (G-507C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
Static power analysis - like a dedicated power analyzer
-
Dynamic power analysis – capture more information
-
Complete test coverage – control system, power section, motor
-
Comprehensive mechanical interface
-
Harmonics calculation option
-
Vector display option (THREEPHASEVECTOR)
-
Waveform Transformations option (THREEPHASEdq0)
-
16 Channels with OscilloSYNC™
-
The CX series is a group of expandable, Edge-lit Collimated Backlights characterized by their high intensity and low heat output.
-
Collimated backlights produce a distinct silhouette and can greatly improve edge detection of curved objects.
-
Available in 1” (25mm) increments for sizes up to 16” X 16” (406mm). All of our 2D expandable products can be specified in irregular (non-square) configurations.
-
This series comes with LB111 Mounting Brackets.
-
This Large Area Diffuse Light provides extremely diffuse illumination over an area of 18” square (457mm).
-
Available in a wide array of wavelengths, providing up to 7kLux at a 1” (25mm) standoff.
-
At 13.6 pounds (6.2 kilograms), the DL071 is both rugged and lightweight.
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com