Maury MW - Programmable Noise Generators - RFX7000B Series
- Output White Gaussian noise
- 127 dB of attenuation; 0.1 dB step size
- Units > 2 GHz have total attenuation of 79.9 dB
- Low distortion signal path
- Noise attenuator accuracy:
- ±0.2 dB or 0.5% at 1 – 500 MHz
- ±0.2 dB or 1% at 0.5 – 1.0 GHz
- ±0.3 dB or 2% at 1 – 2 GHz
- Standard connectors SMA female
- Power 115 VAC, 60 Hz; 110 VAC, 220 VAC
- Operating Temperature: -10° to +65°C
The RFX7000B broadband AWGN generator has a powerful single board computer with flexible architecture used to create complex custom noise signals for advanced test systems. This versatile platform allows the user to meet their most challenging test requirements. Precision components provide high output power with superior flatness, and the flexible computer architecture allows control of multiple attenuators and switches. The 1U enclosure makes this ideal for integrated rack applications.
The RF configuration includes a broadband noise source, noise path attenuator (with a maximum attenuation range of 127.9 dB in 0.1 dB steps) and a switch. RF connection for the signal input and noise output can be located on either the front or rear panels of the instrument. An optional signal combiner, and signal attenuator allow independent control of the noise & signal paths to vary SNR while BER testing.
The RFX7000B is primarily designed for automated and remote control applications typically found in a rackmount test system. Rear panel ethernet is standard, GPIB and RS-232 connectivity is available through optional adaptors. Additionally, the instrument can be manually controlled through use of a mouse and display connected to the rear panel.
Maury programmable noise generators are highly customizable and can be configured to meet the needs of the most complex testing challenges.
|
Output |
Attenuation |
|
White Gaussian noise |
127 dB; 0.1 dB step size |
More Product Information
- 3U or 6U CPCI form factor
- Optional Have Quick synchronization input
- IRIG’s A and B and NASA 36 time code inputs
- 1PPS sync input
- IRIG B output
- 1PPS and time code inputs are redundant
- Single-slot including GPS option
- Zero latency time reads, microseconds through years
- External Event input (optional eight and sixteen inputs)
- Match Time output
- Programmable Heartbeat rate
- Many additional options
The AL-4164 and AL-4166 programmable controllers offer real-time control of positioning subsystems used in near-field and far-field antenna measurement systems. They may be configured to drive planar scanners and general purpose far-field positioners that are encoder-based or involve simultaneous motion.
- Light-tight version and EMI-shielded version for low noise and light-sensitive measurements
- Application flexibility, ideal for use in high frequency applications
- Sized to accommodate thermal chucks, laser cutter, and video equipment on the probe system
- Suitable for integration with vibration isolating tables
- Up to 4 GHz Bandwidth
- ±60 V Offset Capability
- ±800 mV Dynamic Range
- 50 kΩ DC Input Impedance
- 1.2x Attenuation for low additive noise
- MCX terminated cable with wide variety of connections:
- Solder-in (4 GHz)
- Coaxial Cable to U.FL receptacle (3 GHz)
- MCX PCB Mount (4 GHz)
- Browser (500 MHz)
- ProBus Interface
- Additive white Gaussian noise
- Integrated amplifier
- Manual attenuator
- NC6000A -BER testing, and SNR applications
- NC8000A – Secure signal jamming
- Military Applications
- Custom configurations available (consult factory)
The NC6000A and NC8000A Series instruments are designed for general-purpose noise applications on the bench, or in a rack test station. The manual controls make it simple to operate and reduce test set up time. Standard units can be modified for specific customer requirements. Please consult the factory for pricing and availability of these requests.
- 3000 VA to 15000 VA of AC Output Power
- Combines AC/DC source and power analyzer
- Harmonic analysis of Voltage and Current
- Programmable Impedance
- AC, DC and AC+DC Output Modes
- Multiple Chassis Configurations
- Powerful output transient generation
- High Crest Factor Capability
- Arbitrary waveform generation
- IEC 61000-3-2 and IEC 61000-3-3
- High DC power density up to 150 kW in a single bay rack-mount cabinet. Up to 240 kW in a dual bay rack.
- Fast load transient response provides protection from undesired voltage excursions.
- Fast slew rate with exceptional rise/fall times for speed-critical applications.
- Low ripple suitable for the most sensitive applications.
- Low audible noise with temperature controlled variable speed fans.
- High accuracy voltage/current measurements without external DMMs.
- Modular architecture simplifies sparing and maintenance.
- Calibration-grade metrology standards
- Used for VNA calibration and/or calibration validation
Maury mismatch airlines have been designed as verification standards to be used in VNA calibration validation. Each mismatch airline is provided with factory S-parameters data that can be compared with user-measured S-parameters for VNA calibration validation. Measurement uncertainty is also provided, and uncertainty boundaries can be used for definitive calibration validation when used in conjunction with MT940B Insight Real-Time Uncertainty Add-On.
- All Digital IF technology
- 10.1” WVGA (1024 x 600) Display
- Frequency range from 9 KHz up to 3.2 GHz
- -161 dBm/Hz Displayed Average Noise Level (Typ)
- -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
- Total Amplitude Accuracy < 0.7 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- Comes with Preamplifier
Maury Microwave
Website
Maury Microwave is a pioneering leader in the design and manufacture of precision RF and Microwave calibration, test & measurement, and modeling solutions that are powering global efforts toward a more secure, more connected, future.
Maury Microwave offers Measurement and Modeling Device Characterization Systems and Services including nonlinear passive, active and hybrid-active fundamental and harmonic load pull, non-50Ω X-Parameter modeling, pulsed IV Pulsed s-parameters and compact transistor modeling, and patent-pending ultra-fast/accurate noise parameters.
