• Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope 
• Automatic probe detection 
• Provides all necessary power and offset control to the attached probe 
• Supports probes up to 4 GHz 
• Easy firmware updates 
• Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes

• The SL1236 is characterized as a Large Aimed Spot Light. 
• Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators. 
• A range of standoffs and fields of view may be specified at the time of order. 
• The spot light is available in a wide range of wavelengths from UV to IR, including a 3 channel RGB version. 
• Diffuser and polarizer options are also available. 
• The SL1236 provides 14kLux at a working distance of 4” (100mm).

• Easy to Use
  • No need to break the circuit or insert a shunt
  • Small form factors for use on crowded boards
• Variety of Applications
  • Bandwidths up to 100 MHz
  • Peak currents up to 700 A
  • Sensitivities down to 1mA/div
• High Precision Measurements
  • Low frequency accuracy of 1%
  • Integrated autozero capability
• Fully Integrated with Teledyne LeCroy Oscilloscope
  • No additonal hardware is required
  • Power is supplied from oscilloscope ProBus connection
  • Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
  • Degauss and Autozero directly from oscilloscope user interface
• DCS025 Deskew Calibration Source
  • Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes

This compact EMC Chamber with a 3 meter test range will settle into test areas of limited space while continuing to produce exceptional performance for EMC measurement. Emission test volumes of up to 1.5m are accommodated with very repeatable results. Suitable for EMC pre-compliance emissions and EMC compliance immunity testing.

• Onboard flash controller
• Designed for the integration into Orca/Shark enclosures with 3" window
• Flashing with up to 570% nominal current possible
• Excellent heat dissipation
• Colors: red, white, IR
• Radiation angles: 14°, 23°, 36°, 76° ‐ Trigger in‐/output
• LED protection due to emergency shut down
• Temperature monitoring possible
• Easy programming due to intuitive application surface

• 5 GigE Ethernet port & hardware
• Supports cable lengths up to 100 m (CAT-5e, CAT-6) or (4T-6A)
• Simplified set-up with field proven Sapera LT software featuring CamExpert
• Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector

ProPhotonix designs and manufactures a wide range of LED Line Lights configurable to suit almost any application. All of our line lights offer high intensity illumination and excellent uniformity ensuring that the system performs consistently and reliably in even the most challenging of applications.

Our LED Line Lights are ideally suited to line scan and web inspection of a host of materials and products, including paper, foil, metal, road surfaces, PCBs and semiconductors.

The FX2 is the edge-lit flat diffuse light built for reflective surface inspection.

Unlike back-lit diffuse designs, the FX2 positions its LEDs in the frame rather than behind the emitting window. This side-lit geometry allows for a thin housing and a scalable planar design with uniform output at longer working distances.

The FX2 is available in sizes from 50 mm x 50 mm up to 600 mm x 600 mm in 25 mm increments. It is offered in 11 wavelengths, with optional polarization to help reduce glare on reflective surfaces, and can be specified with a central viewport for select front lighting applications.

• High-level noise modules mounted on a circuit board
• Modified BW, output power, and flatness specifications

The NC2000 Series amplified noise modules are an excellent choice for high-level noise modules mounted on a circuit board. The NC2000 Series modules are housed in 24, or14-pin dual-inline packages. The NC4000 series modules are housed in a 40-pin module that cover similar noise bands to the NC2000, but have higher crest factor, and 60 dB of TTL controlled attenuation. Modified BW, output power, and flatness specifications are available for these modules. Please consult Noisecom for availability, and appropriate package style.