Safran DSI - SPARTE 1300 37.7 to 44.3 ft Telemetry Tracking Antenna
The SPARTE 1300 series antenna is a tried-and-tested solution designed for mission-critical applications where reliable telemetry reception is essential. This antenna excels at accurately tracking flying targets, such as aircraft or space launch vehicles, even over long distances, thanks to its high-gain, large-aperture design.
Built with a robust and sturdy construction, the SPARTE 1300 series guarantees optimal performance in any scenario. It features an aluminum-alloy reflector for enhanced surface accuracy, SCM tracking feeds for dependable and precise tracking, and quad-drive motors for redundancy and no-backlash operation.
TRACK YOUR AIRCRAFT OR SPACE LAUNCH VEHICULES WITH OUR LARGE APERTURE ANTENNA
The SPARTE 1300 series comes equipped with a riser that integrates the Antenna Drive cabinet and any necessary equipment, allowing for optimal positioning as close to the antenna as possible.
SPARTE 1300 Features
|
Best-in-Class Servo Controls |
Digital Servo-Drives, Precise Reducers |
|---|---|
|
SCM 1000 HZ Scan Rate |
Common SCM Design for L/S/C/ an D S-band feeds |
|
Modular L, S OR C Band |
Simple Add-On Upgrade without any Structural Change |
|
Dual Drive |
Uninterrupted Operations, No Backlash |
|
Options on Request |
Long Loop Test Capability, Radome, Improved G/T |
More Product Information
Configuring, managing, and integrating the system are crucial steps for ensuring the success of flight testing and achieving precise telemetry. eZ Software is your go-to solution.
- eZ SetUp software allows to configure from a single acquisition unit to a complete acquisition system within a network architecture.
- eZ Operation software is an advanced tool for centralized supervision and control of complex test systems from an onboard operator station.
- eZ Processing / Advantys software offers advanced functions for data display and processing.
The D19-GT/-GTS Download Station ensures a secure and high-speed data download (via 40 Gbit Ethernet) from MDR or MDR-GT/-GTS storage media. Specifically designed for flight testing applications with demanding data rates and storage needs, the D19-GTS, when paired with MDR-GTS, incorporates advanced cybersecurity features like Data-At-Rest (DAR) protection and firmware updates. Configuration changes are facilitated through a Removable Secure Operational Disk (RSOD).
Our patented miniaturized L/S/C Tri-Band Feed delivers top-notch performance and unmatched flexibility.
Equipped with a common L/S/C radiating front end, it’s complemented by a modular set of active RF modules, enabling simultaneous reception and tracking across various frequency bands. Its compact, lightweight design allows it to be mounted on any dishes ranging from 6 to 24 feet.
Available in single, dual, or tri-band configurations, this feed offers the best value for customers looking to meet current requirements while staying future-ready.
It’s also field-upgradable to add any missing bands with straightforward RF module additions, ensuring scalability while keeping costs in check.
IRIS optical ground stations are built to cater to a wide range of applications (LEO/GEO/Probes), including Earth observation, high throughput bi-directional telecommunications, feeder link, or deep space missions. The IRIS systems leverage the Cortex Lasercom, a globally recognized optical modem that supports various standards such as SDA, CCSDS, and HPE.
The CORTEX RSR-RF (-40 or -200) stands as a digital recorder that plays a vital role in capturing and reproducing the RF analog signal received by the antenna before any processing occurs.
It’s an essential component in a Telemetry Station, ensuring the utmost availability of crucial data, particularly in cases where on-board recording is not feasible.
Data collected in-flight offers extensive post-processing flexibility. You can fine-tune various settings in the receiver, the bit synchronizer, and the decommutator to maximize the extraction of data, a feat achievable only with RF recording. Furthermore, it serves as an invaluable tool for test range qualification ahead of test flights.
The VS1510 is a video & data recorder/server packaged in a rugged compact chassis (4.92” x 5.75” x 7.28 ” / 9.9 lb), for recording on a Removable Memory Module (RMM).
Recorded data can be replayed in a standard PC/Windows® environment, using specific or COTS mission debrief solutions for post mission analysis.
In addition, typically for ISR applications, data can be replayed while recording on board. The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for collecting, processing, storing, utilizing, and sharing field and mission data.
These units are designed for both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, conforming to established standards such as DO-160 and MIL-STD-810.
The NS1310 is a robust, compact data server and storage unit specifically designed for the challenging conditions of airborne environments.
This versatile system functions as a Network Attached Storage (NAS) unit and is equipped with a high-capacity Removable Memory Module (RMM).
The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for field and mission data tasks, such as data acquisition, processing, storage, exploitation, and distribution. These units are suitable for use on both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, adhering to standard test methods like DO-160 and MIL-STD-810.
The highly flexible modular GMDR system is a versatile and future-proof solution for acquisition, recording, dissemination and replay of FTI data in ground station applications.
With its high integration, incomparable range of supported video interfaces and full compatibility with global leading MDR products, the GMDR integrates seamlessly into customers‘ existing test range topologies.
With its intelligent data reduction through segmentation, pre-selection and filtering as well as the capability to freely disseminate subsets of data among several network destinations, GMDR efficiently reduces the operator‘s workload when analyzing test results.
For standard PCM/Ch7-Telemetry applications, two simplified, cost-efficient variants with integrated PCM/Ch7-Telemetry signal boards and one Data Express technology (DE50)- compatible storage media slot are available.
KapCOM (EWC33) is a new generation of transceivers with high performance Telemetry, Tracking & Command (TT&C) service. It is used on OneWeb constellation & is based on the heritage of EWC15 used in key space missions like ROSETTA, DEEP IMPACT, …
Safran DSI
Safran DSI Testing & Telemetry provides complete, end-to-end solutions covering instrumentation, mission systems, onboard recording, and transmission, through to base stations for data monitoring and control. Our solutions are platform-agnostic and adaptable to customer mission needs.
