Safran DSI - SPARTE e100 Flight Test Antenna based on Electronic Beam Steering Technology
The SPARTE e100 is a hybrid antenna addressing the telemetry applications in S-Band, including hypersonic test articles.
The antenna is a combination of an Electronic Beam Steering supporting any elevation from -5° up to +95° and a single-axis mechanical rotation of the patch panel providing unlimited azimuth. The patch panel’s size enables the SPARTE e100 to achieve telemetry reception performance comparable to that of a 1.2m diameter dual-axis antenna.
This is achieved with a significantly simpler mechanical design, ensuring easier maintenance throughout the antenna’s operational lifespan.
The SPARTE e100’s rapid tracking capabilities, reaching speeds of up to 60°/s in azimuth and virtually infinite in elevation, make it an ideal “lock-on” antenna.
SPARTE e100 Features
|
Cost-Effective |
Simple and Robust Mechanics provides High Performance with Limited Maintenance |
|---|---|
|
Transportable |
Lightweight, Compact Antenna, Easy Setup |
|
S-Band, Fixed or Shipborne |
Ideal for hypersonic missiles and rocket telemetry |
|
Auto and Slave |
High Tracking Accuracy. Seamless User Interface as all SPARTE antennas. Option for Shipborne Operation. |
|
Radome Protection |
Against Rain, Sand, Dust… and no Sensitivity to Wind |
|
Applications |
Hypersonic test articles, missiles, launch vehicles |
More Product Information
Sensors acquisition and recording for troubleshooting is a cumbersome process in a fully furnished or operational aircraft, especially when time and low footprint are key drivers.
This is no more the case with Safran new solution µMA:
- its cylindrical form factor allows easy installation by just requiring a standard clamp used to mount tubes
- its battery power supply and its wireless connectivity removes the need of installing any harness in the aircraft.
All these capabilities are available while providing high measuring performance and harsh environment ruggedized in line with Safran standard solutions.
X-LITE (EWC27) has been designed with for small satellites flying in Low Earth Orbit. One of the main challenges is low consumption of radio communication links. X-LITE (EWC27) offers high data rate telemetry and robust X band transmission.
The RMM Manager utility software offers convenient, user-friendly pre-mission or post-mission access to SC1450-series Removable Memory Modules (RMM) for use with VS-Series video & data recorder/server, in PC/Windows® environment.
The N-SPHERE comes as a new generation of GNSS receiver. It implements the latest state-of-the-art positioning and synchronization techniques, to reach top class of performances for Real-Time Precise Onboard Orbit Determination (P2OD) and accurate time synchronization.
The CORTEX RSR-RF (-40 or -200) stands as a digital recorder that plays a vital role in capturing and reproducing the RF analog signal received by the antenna before any processing occurs.
It’s an essential component in a Telemetry Station, ensuring the utmost availability of crucial data, particularly in cases where on-board recording is not feasible.
Data collected in-flight offers extensive post-processing flexibility. You can fine-tune various settings in the receiver, the bit synchronizer, and the decommutator to maximize the extraction of data, a feat achievable only with RF recording. Furthermore, it serves as an invaluable tool for test range qualification ahead of test flights.
The RTR-X4 is one of the most advanced digital telemetry receivers on the market with its well-recognized RF performance and signal processing capability.
The 4U chassis-based RTR-X4 can support up to four channels providing flexibility and capability as well as a rich set of features for different frequency bands, modulations, decoders and output formats.
Not only does the CORTEX RTR provide an extensive set of features for different frequency bands, modulations, decoders and output formats, but the user can easily upgrade the equipment in the field to access additional and new features. The RTR-X4 is an excellent fit for flight test ranges, offering full flexibility and easy access to settings through its user-friendly GUI on the embedded 8.4-inch screen.
N-XONOS is a X-band transmitter dedicated to small satellites and designed to answer to an increasing demand of high data rate transmission. It is a new generation of transmitters on an innovative design.
The VS1510 is a video & data recorder/server packaged in a rugged compact chassis (4.92” x 5.75” x 7.28 ” / 9.9 lb), for recording on a Removable Memory Module (RMM).
Recorded data can be replayed in a standard PC/Windows® environment, using specific or COTS mission debrief solutions for post mission analysis.
In addition, typically for ISR applications, data can be replayed while recording on board. The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for collecting, processing, storing, utilizing, and sharing field and mission data.
These units are designed for both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, conforming to established standards such as DO-160 and MIL-STD-810.
The PPS®X00 plasma thruster (Hall effect) takes benefit of Safran’s long experience with electric propulsion to propose a very efficient product. PPS®X00 was designed to address the specific requirements inherent in the “New Space” market environment. With a lifespan exceeding 5,000 hours and very high specific impulse, the PPS®X00 is an extremely versatile thruster, making it ideal for all types of applications in its core market: low Earth orbit (LEO).
Safran DSI
Safran DSI Testing & Telemetry provides complete, end-to-end solutions covering instrumentation, mission systems, onboard recording, and transmission, through to base stations for data monitoring and control. Our solutions are platform-agnostic and adaptable to customer mission needs.
