Southwest Microwave - Adapters - 110 GHz
Southwest Microwave offers a full range of within-series and between-series precision adapters with near-metrology grade performance.
- High performing connector savers, DC to 110 GHz
- Economical solution for critical production and testing
- Approved for demanding environments such as Space and other Hi-Rel applications
- High repeatability and accuracy
- Available in various connector configurations
Between Series 1.85mm (V) to SSBB Board-to-Board Adapters
|
Model Number |
Gender |
Bore Type |
Data Sheet |
|---|---|---|---|
|
Female - Female |
Smooth |
In Series 110 GHz 1.0mm (W)
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Male |
||
|
Male - Male |
||
|
Female - Female |
||
|
Female - Female |
Between Series 90 GHz 1.35mm (E) to 1.0mm (W)
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Female |
||
|
Male - Female |
Between Series 67 GHz 1.85mm (V) to 1.0mm (W)
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Female |
||
|
Female - Male |
||
|
Male - Female |
||
|
Male - Male |
Between Series 67 GHz 1.85mm (V) to SSBP Coax Contacts
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Female |
||
|
Male - Female |
Between Series 67 GHz 0.9mm SuperMini to 1.0mm (W)
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Male - Female |
||
|
Female - Female |
Between Series 67 GHz 0.9mm SuperMini to 1.85mm (V)
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Male - Female |
||
|
Male - Male |
||
|
Female - Female |
||
|
Female - Male |
In Series 67 GHz 0.9mm SuperMini
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Female |
In Series 67 GHz 1.85mm (V)
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Male |
||
|
Male - Male |
||
|
Female - Female |
||
|
Female - Female |
In Series 67 GHz 1.85mm (V) NMD
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Male |
In Series 50 GHz 2.40mm
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Male |
||
|
Male - Male |
||
|
Female - Female |
Between Series 40 GHz 2.92mm (K) to 1.85mm (V)
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Female |
||
|
Female - Male |
||
|
Male - Female |
||
|
Male - Male |
Between Series 40 GHz 2.92mm (K) to 2.40mm
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Female |
||
|
Female - Male |
||
|
Male - Female |
||
|
Male - Male |
Between Series 40 GHz SSMA to 2.40mm
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Male |
||
|
Male - Female |
||
|
Male - Male |
||
|
Female - Female |
In Series 40 GHz 2.92mm (K)
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Male |
||
|
Female - Male |
||
|
Male - Male |
||
|
Female - Female |
||
|
Female - Female |
||
|
Female - Female |
Between Series 33 GHz 3.5mm to 2.40mm
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Female |
||
|
Female - Male |
||
|
Male - Female |
||
|
Male - Male |
In Series 27 GHz SuperSMA
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Male |
||
|
Male - Male |
||
|
Female - Female |
||
|
Female - Female |
||
|
Female - Female |
||
|
Female - Female |
||
|
Female - Female |
Between Series 18 GHz Type N to SuperSMA
|
Model Number |
Gender |
Data Sheet |
|---|---|---|
|
Female - Female |
||
|
Female - Male |
||
|
Female - Female |
||
|
Male - Female |
||
|
Female - Male |
||
|
Male - Male |
Between Series 2.40mm to SSBB Board-to-Board
|
Model Number |
Gender |
Bore Type |
Data Sheet |
|---|---|---|---|
|
Female - Female |
Smooth |
Between Series 2.92mm (K) to SSBB Board-to-Board
|
Model Number |
Gender |
Bore Type |
Data Sheet |
|---|---|---|---|
|
Female - Female |
Smooth |
||
|
Female - Female |
Detent |
||
|
Female - Female |
Detent |
More Product Information
The easy-to-use, interchangeable primary adapters for FRIWO's adapter systems make it possible to use products globally and can result in considerable reductions in the cost of logistics. The IEC adapter (IEC320 C8) offers a standard alternative for countries with different power plugs.
Our 2 Series cable assembly showcases excellent phase stability against bending, developed with microwave/mmWave measurement environments in mind.
Its flexibility means low repulsion, reducing the load on the measured object
The SMX-7xxx product family is made up of a series of microwave switch cards
-
3 Measurement States; Quiescent (OFF-State), Non Quiescent (ON-State), and Pre-State
-
-
The Pre State is a short high voltage state used to activate
the traps in the semiconductor.
-
-
-
Adjustable delay (Δt) between the Pre state and Non Quiescent state down to 0s.
-
Independently adjustable timing settings for the Three-state gate pulser and drain pulser
-
Easy Integration into existing mainframes
-
Best price per contact – typically over one million (1,000,000) touchdowns
-
RF/Microwave signal is shielded and completely air isolated in the probe body
-
Excellent performance in vacuum environments and temperatures as low as 4 K, or as high as 300°C
-
Highest impedance control with perfectly-symmetrical, MEMS-machined coplanar contact structure
-
Probe on any pad material with minimal damage
Focus recommends TRL Calibration Kits for applications such as load pull & noise parameters. Due to high reflection and low loss, tuner S-parameter measurements represent a challenge for VNA’s, because of error term determination and coupler directivity. Long experience has taught us not to rely on other calibration techniques than TRL (Thru-Reflect-Line). The popular SOLT technique is conditionally useable, but not guaranteed, up to 4GHz. The much convenient ECal method has provided questionable and inconsistent results. Our Customers are advised to be very careful with VNA calibrations, because the whole measured data depends on that.
Because of this, and to save our customers time and doubt, Focus has developed and offers a set of precise and reliable TRL calibration kits from 0.03 to 110 GHz with the following connector types: 7/16, N, APC-7, 3.5mm, 2.9mm, 2.4mm, 1.85mm, WR-15, WR-10. Our calibration kits are compatible with all commercial network analyzers.
For more information on TRL Calibration Kits, please read the following paper on TRL Versus SOLT
-
Combine up to 12 fail-safe building blocks, dual SPDT, SP4T, SP6T, or transfer switch in a compact 1U footprint
-
Front “pluggable” relays facilitate field maintenance
-
Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
-
Flexible API supports IVI and Linux development environments minimizing software investment
-
LXI Trigger Event implementation provides seamless test synchronization with external devices
-
Store up to 128 relay state configurations for quick recall, including an automatic power up state
-
Define exclude lists to avoid setting an undesirable configuration
-
Relay odometer tracks closures to facilitate preventative maintenance
Non-linear measurement data is often used to create a behavioral model for high frequency components. Formulations of these models have been defined in terms of traveling waves, with a desire to represent nonlinear behavior of high frequency transistors through a direct extension from linear s-parameters.
The Mesuro model portfolio is comprised of two variations of a behavioral model – each targeted at a particular end use – Cardiff Model Lite (CML), where the desired output is a local model, and Cardiff Model+ (CM+), which incorporates higher order mixing terms allowing a single model to fit over a range of impedance space.
Focus Microwaves pushes the boundaries of tuner technology once again. While 6G frequencies and applications are still being defined, Focus took the initiative and developed a new family of waveguide tuners designed for frequencies greater than 110GHz. Leveraging the success and technology of the DELTA tuners (industry standard for direct connect on wafer applications) and combined it with the micro-metric accuracy and repeatability of the small footprint omega tuners. These new waveguide tuners will revolutionize the Sub-THz bands.
Southwest Microwave
Since 1981, Southwest Microwave has delivered performance-leading interconnect solutions currently available from DC to 110 GHz for hi-rel/space, defense, instrumentation, integrated-circuit and PCB evaluation applications. Built in the USA to rigorous performance and quality standards, Southwest Microwave connectors deliver the industry’s lowest RF leakage, insertion loss and VSWR. Products include Super SMA, N, TNC, SSMA, 2.92mm, 2.40mm, 1.85mm, 1.35mm, 1.0mm and 0.9mm SuperMini connectors in a variety of mounting configurations, plus board-mount (end-launch, vertical launch, board-to-board) connectors, cable assemblies, coax contacts for multicavity connectors, adapters, installation tools and launch accessories for microstrip, stripline and coplanar launches.
Contact Details
Southwest Microwave - Corporate Headquarters
9055 S. McKemy St., Tempe, AZ 85284-2946, USA
Phone: 480-783-0201
Fax: 480-783-0360
Test & Measurement
Download Line Card
Document
Embedded
Download Line Card
Document
