Tekbox Digital Solutions - TBST - Shielded Tents 4-Table top sizes
The TBST line of shielded tents is designed to suppress interference from ambient noise when carrying out EMC pre-compliance measurements with sizes of 200 cm x 100 cm x 100 cm, 124 cm x 64 cm x 60 cm or 86 cm x 48 cm x 48 cm. The 200 cm and 124 cm tent can accommodate any Tekbox pre-compliance test equipment such as LISNs or TEM-cells. The 86 cm tent will fit the TBTC0/1/2 and all our LISN.
The TBST line of shielded tents is designed to suppress interference from ambient noise when carrying out EMC pre-compliance measurements with sizes of 200 cm x 100 cm x 100 cm, 124 cm x 64 cm x 60 cm or 86 cm x 48 cm x 48 cm. The 200 cm and 124 cm tent can accommodate any Tekbox pre-compliance test equipment such as LISNs or TEM-cells. The 86 cm tent will fit the TBTC0/1/2 and all our LISN.
The shielded tents are composed of two layers of conductive fabrics. It is supported by rigid aluminum profiles. The filter panel at the side provides a 240V/10A mains AC filter (optional for the smaller tent), two general-purpose 240V/10A AC/DC filters, and four coaxial feed through adapters with screw caps. The access opening is sealed with conductive Velcro tape.
Specifications
|
TBST-120/60/60/2-B; TBST-86/49/45/1-B; TBST-86/49/45/2-B |
|
|---|---|
|
Outer dimensions: |
124 cm x 64 cm x 60 cm (86 cm x 48 cm x 48 cm) |
|
Opening dimensions: |
85 cm x 35 cm (40 cm x 22 cm) |
|
Frame: |
20 mm x 20mm extruded aluminium profiles |
|
Shielding: |
2 layers of conductive fabrics |
|
Seal: |
conductive Velcro tape |
|
Suspension: |
Velcro stripes |
|
Filter panel: |
1 x 240V/10A AC filter; IEC socket (optional for the smaller tent) 2 x 240V/10A DC-filter; cables with female Banana couplers 3 x N- female feedthrough connector with screw caps 1 x BNC-female feed through connector |
|
Internal AC Socket: |
pigtail cable with detachable female Schuko |
|
Attenuation: |
~50…70 dB in the range DC to 6 GHz |
|
Weight: |
10.8 kg |
|
TBST-200/100/100 |
|
|---|---|
|
Outer dimensions: |
204 cm x 104 cm x 100 cm |
|
Opening dimensions: |
130 cm x 46 cm |
|
Frame: |
20 mm x 20mm extruded aluminum profiles |
|
Shielding: |
2 layers of conductive fabrics |
|
Suspension: |
Velcro stripes |
|
Filter panel: |
1 x 240V/10A AC filter; C19 socket 2 x 240V / 10 A AC/DC filters, attached cables with Banana couplers 3 x N-Female coaxial feed-through connectors with screw caps 1 x BNC-Female coaxial feed-through connector with screw caps |
|
Internal AC Socket: |
pigtail cable with detachable female Schuko + country-specific AC cables with C13 connector |
|
Attenuation: |
~50 dB in the range 10 MHz to 6 GHz, see chapter 3 |
|
Weight: |
17kg + 3kg (packaging) |