Teledyne LeCroy - Probe Adapters
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Probe Adapters
TPA10 - TekProbe to ProBus Probe Adapter |
TPA10-QUADPAK - Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case. |
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors |
More Product Information
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
-
Fully isolated experiment space for true 4K temperatures during probing
-
Cryogenic positioners to provide large travel ranges without warming up the device
-
Flexible thermal jumpers to ensure high thermal conductance and low mechanical transmission
-
A soft vacuum bellows provides a compliant mounting interface for the cryocooler
-
Quick release vacuum feedthroughs for easy configurability
-
A large rectangular port for high signal capacity
-
DigRF v4 Decodes
-
Low-speed (26 Mb/s)
-
Medium-speed (1248 Mb/s)
-
High-speed (1456 Mb/s)
-
-
DigRF v3 Decodes
-
Low-speed (6.5 Mb/s)
-
Medium-speed (26 Mb/s)
-
High-speed (312 Mb/s)
-
-
Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms
-
Correlate analog waveforms with protocol decode on one screen
-
View decoded data in hexadecimal format
-
Decode information expands as the time base is adjusted or zoomed
-
Convenient table display with quick “Zoom to byte” capability
-
Quick search capability for specific message packets
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
-
6 kV CAT safety rated
-
Widest differential voltage range available
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
Best price per contact – typically over one million (1,000,000) touchdowns
-
RF/Microwave signal is shielded and completely air isolated in the probe body
-
Excellent performance in vacuum environments and temperatures as low as 4 K, or as high as 300°C
-
Highest impedance control with perfectly-symmetrical, MEMS-machined coplanar contact structure
-
Probe on any pad material with minimal damage
-
Different substrate carriers for wafers up to 200 mm or single dies
-
Probe cards and/or up to eight positioners
-
Probe positioners placed inside vacuum chamber
-
Short and stable probe arms
-
Intuitive, manual drives
-
Front loading capability through load door
-
Software control of chuck for fast step-and-repeat testing of the entire wafer
-
Fast step-and-repeat testing of the whole wafer
-
DC, AC and RF/microwave device characterization, 1/f, WLR, FA and design debug
-
Full thermal range of -60°C to +300°C
-
Reliable and repeatable contact
-
Moisture-free, light-tight and EMI-shielded test environment with MicroChamber® technology
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
High thermal stability components
-
On-axis probe-to-pad alignment
-
Flexibility from hot only to full thermal range of -60°C to +300°C
-
Thermally induced drift can be automatically re-aligned for 30 μm pads in a temperature range from -40°C to 150°C (the effective temperature range depends on pad size, probe card holder and probe card)
-
3 performance level configurations (fully-shielded / shielded / open)
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
User-centered design minimizes training costs and enhances efficiency
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)