Trenton Systems - Network Infrastructure Optimization Solution
Designed with Intel‘s IPU E2000 ASIC, the Network Infrastructure Optimization Solution is a secure, configurable network infrastructure acceleration, monitoring, and management platform serve critical applications and services across data centers or at the network edge
- Software-defined, Hardware-accelerated - Accelerate critical applications and services with a single piece of hardware equipped with software that enhances functionality and programmability.
- Network Visibility and Data Analysis - Detect anomalies in network traffic with sub-10 nanosecond precision timestamping while encrypting data packets traveling between devices.
- Enable Streamlined Management - Run multiple workloads in parallel at 200Gbps line rate speeds without interference or resource contention within diverse data environments.
Technical Highlights
- 1U Form Factor
- Intel® IPU E2100 ASIC
- Up to 48GB LP-DDR
- 3x Intel® Optane® SSDs
- 16x ARM Neoverse N1 Cores
Solution Highlights
- Intel® IPU E2000 is the next-gen programmable network device for packet processing, filtering, and routing.
- IPSec secures communications over networks by providing authentication, confidentiality, and integrity for packets.
- P4 defines packet processing pipelines, enabling flexible and programmable network infrastructure.
- PTP 2.0 provides high precision for accurate packet timestamping (sub 10ns precision) in distributed systems.
- Data Packet Development Kit (DPDK) open-source software framework enables highperformance packet processing.
- Customization capabilities helps Trenton craft a system according to your technical, performance, and environmental specifications.
More Product Information
- Dual Voltage ranges that support over-voltage testing on 480V-based systems
- Separate terminal blocks for single-phase and three-phase AC power supply outputs
- High Power AC and DC Source
- Auto paralleling for higher power system expansion
- Single and three-phase modes
- Arbitrary & Harmonic Waveform Generation
- Standard LXI LAN, USB, and RS-232, Optional GPIB
- Step, list, and pulse voltage transients with down to 500usec resolution
- Complete avionics power quality test suites
- 15kVA to 1MVA Power Levels
- Intuitive 5” color display for ease of navigation
- Internationally accepted test routines for EMI/EMC, Safety Compliance
Systems are complete. They plug into an outlet and are ready to go. Our standard systems are 3U, which is 5.25″ and 5U, 8.75″. Systems are available with or without IEEE-488, RS-232 and Ethernet connectivity. Amplifiers Systems are available in both Broadband and Band-Specific frequencies. We are well-known in the industry for successfully adapting our amplifiers or custom designing new solutions to suit each unique project. Please refer to our Adapted & Custom Design Solutions link to begin formulating your performance objectives and other criteria.
-
Power over Ethernet
-
IEEE 1588 PTP
-
Trigger over Ethernet
-
Ultra-compact design
-
Monochrome (G-158B) and color (G-158C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
- Network Enabled Frequency Distribution Amplifier
- Dual Frequency Inputs with Auto Failover
- Low Phase Noise Reference Frequency Outputs
- Programmable per channel amplitude
- 1U 19” rack mount
- Redundant Hot Swappable Power Supplies
Most of us know Z400 as the Nordic god of thunder and lightning. But in the world of Ethernet testing world, Thor plays a starring role in Xena’s Ethernet Traffic Generation solutions.
Thor boasts some truly heroic features – like being able to test both NRZ and PAM4 speeds. For NRZ based Ethernet at data rates of 10G / 25G / 40G / 50G and 100G. And for PAM4 based Ethernet at data rates of 50G / 100G / 200G / 400G. It can also test Auto-Negotiation and Link Training (AN/LT).
In the Xena line we also have Z10 Odin (NRZ testing 10Mbps to 10G), Z100 Loki (NRZ testing 10G to 100G), and Z800 Freya (10G PAM4 to 800G PAM4) and in the future also 1.6 Terabits.
FormFactor - Cascade Ultra High-Power (UHP) - Enabling single-contact high-current/high-voltage test
- Enables coaxial measurements up to 10,000 V and 300 A pulsed (600 A in a parallel configuration) with a single touchdown
- Even distribution of high current with innovative multi-fingertip design
- Compatible with TESLA 200/300 mm power device characterization system
- Reduced measurement time by testing both high-voltage and high-current conditions with a single touchdown
- Accurate characterization of a wide range of pad sizes and test currents, with minimum pad damage and contact resistance
- Safe, reliable and repeatable high-current/voltage measurements over a wide temperature range (from -55°C to +300°C)
COMTRACK stands as the preferred choice for over 100 trusted telemetry tracking operators.
Its track record spans various applications, from military aircraft and helicopters to commercial aircraft and even launch vehicles. COMTRACK steps in where larger, space-consuming parabolic systems may not be the best fit.
With its compact, rugged design, this embedded phased array auto-tracking antenna excels at providing reliable telemetry reception across L, S, or C-bands, covering the entire sky up to 93 miles away. Its intelligent integration combines high-elevation reception with long-range capabilities, all within a protective radome.
Additionally, it enables dual-band installations to support systems operating in both current and future frequency ranges. When it comes to trust, simplicity, and performance, COMTRACK takes the lead.
-
Monochrome (G-419B) and color (G-419C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
The industrial manufacturing industry has been a sector of constant innovation for centuries, continuously leveraging the data from frequent iterations to achieve new solutions. This is no different today, driven by advancements in automation, the adoption of Industry 4.0 technologies, the integration of IoT, and the shift towards sustainable manufacturing practices. These trends require the development of new testing protocols, thorough safety standards, and sophisticated quality control measures to ensure the reliability and efficiency of increasingly complex systems. Manufacturers must also address interoperability and cybersecurity challenges posed by interconnected devices and digital supply chains. Add the push for eco-friendly, sustainable manufacturing practices in conjunction with rigorous testing for compliance with environmental regulations, and achieving balanced testing facility solutions is no easy task.
Trenton Systems
Founded in 1989, Trenton Systems provides the defense, government, industrial, and commercial markets with advanced, TAA-compliant high-performance computing solutions designed in consultation with customers. Equipped with the latest processing, AI/ML/DL, networking, security, and storage technologies, our solutions are designed in collaboration with our global partnership ecosystem.
All solutions, whether configurable or custom, are engineered right here in the USA within a vetted and transparent supply chain and fortified by comprehensive multi-layer cybersecurity across the hardware, firmware, software, and network stack. Proactive risk management methodologies coupled with zero trust provisioning ensure maximum reliability, longevity, and operational efficiency.
Trenton Systems’ rugged computing solutions meet or exceed the most stringent military and industrial standards, and are produced in the company’s headquarters in Atlanta, GA, which is certified to ISO 9001:2015 and AS9100D quality management standards.
Trenton Systems also provides in-house engineering, comprehensive lifecycle management, BIOS customization, strict revision control, and an industry-leading five-year warranty program.
Contact Details
Trenton Systems
3100 Breckinridge Blvd. Building 1200 Duluth, GA 30096, USA
Phone: 770-287-3100
Email: info@trentonsystems.com
Embedded
Download Line Card
Document
