Optimized Measurement Setup

• Multi-purpose SIGMA instrument integration kit
• Shorter cabling and universal chuck connection
• Triax probe with protected guard
• Optimized signal path
• Safe probe tip exchange
• Seamless integration of various analyzers

High Power Chuck

• Triax design for low-leakage measurements up to 3 kV
• Special chuck surface coating
• High-isolation ready
• High-current measurement up to 100 A with lowest contact resistance
• Optional upgrade for 10 kV (coax) operating voltage
• Thin wafer handling capability

Safe Operation

• Arcing protection
• Shield Enclosure with interlock
• Advanced grounding concept
• Maximum protection from high-voltage shock for users and devices
• Common ground protection for all instruments
• EMI/light-tight shielded environment

• Comprehensive Test Solutions - Our CTS 4.0 Series offers complete test solutions for emissions and immunity compliance testing of AC and DC power products, ensuring your products are ready for global markets.
• Single & Three Phase Operation - Offers flexibility
• Direct PC Bus Access - Provides high sampling rate and resolution for accurate measurements and high-speed data transfers
• PC-Based Harmonic & Flicker Testing - Provides real-time full-color data display updates and continuous PASS/FAIL monitoring
• Supports Global Standards - Supports European and Japanese standards
• Easy To Use Interface - Provides IEC test setup, data analysis, display, MS Word test reports, and data files generated in MS Excel format
• High Resolution - Data storage to disk for post-acquisition analysis and reporting
• Single Step - Single Step and Fast Forward replay of recorded test data at 200 mSec

• 3000 VA to 15000 VA of AC Output Power 
• Combines AC/DC source and power analyzer 
• Harmonic analysis of Voltage and Current 
• Programmable Impedance 
• AC, DC and AC+DC Output Modes 
• Multiple Chassis Configurations 
• Powerful output transient generation 
• High Crest Factor Capability 
• Arbitrary waveform generation 
• IEC 61000-3-2 and IEC 61000-3-3

Software for calibration automation. Available with CamOCR Camera Readout module. Caliber can run autonomous calibrations through remote control or provide guidance to operator in manual mode. Calculated results and uncertainties can be exported to WinQBase or third party software. 

• Automatic calibration of instruments
• In line with ISO17025 and other metrology standards
• Automated optical readout module for multimeters
• Users are free to add any custom standard or DUT

The award winning VXI Modular Instrumentation Platform (VMIP™) provides customers with a level of modularity for instruments that is unmatched in the industry. The VMIP™ makes a single VXIbus card slot three times more powerful than single device solutions. Each VMIP™ instrument can be mixed and matched with other VMIP™ devices for added flexibility.

• Typical accuracies of ±0.20°C 
• 16-channel isolated universal thermocouple/voltage inputs 
• Power over Ethernet+ (PoE+) 
• 20K samples/second/channel sample rate 
• 24-bit ADC per channel 
• 500 V channel-ground isolation 
• 1000 V channel-channel isolation 
• Data logger acquisition mode 
• Built-in parallel data streaming 
• Full-featured embedded web interface 
• LXI Ethernet interface 
• 8-bit bank isolated digital I/O 
• Compact 1U half-rack form factor

The PXIe chassis include 18-slot chassis (CMX18 and CMX18A) and 9-slot chassis, pictured (CMX09 and CMX09A).

The EMX-2500 is a Gigabit Ethernet LXI Controller for the EMX Series of PXIe Instruments.

• Eight ports of 8 I/O bits each 
• High current capability for control of external relays, 300 mA sink 
• Simulate and receive digital data at up to 2 MHz sample rates 
• Selectable output voltages range from 3.3 V to 60 V 
• Setup outputs and scan inputs as part of EX1200 measurement sequencing engine