Simulator to reproduce various transient surge phenomena which are generated in a vehicle and required in the international standard ISO-7637-2 (2004) Standard, and evaluate the immune resistibility of the equipped electronics devices against the surge. 

• ISO 7637-2 (2004) Standard compliant simulator 
• Correspondent to the test for 12V/24V/42V systems in a vehicle 
• Stand-alone usage per the each generator unit possible as well as the comprehensive control 
• Large capacity CDN (60V/50A) available (Option) 
• Up to 200A power supply possible (Option) 
• Windows in Japanese applicable for the software program as well

_{Private standards or specifications by manufactures can be responded upon request.}

The Broadband sleeve antenna was developed to efficiently perform proximity radiation immunity testing.

The international standards ISO11451-3/ISO11452-9 stipulate proximity radiation immunity testing methods that assume electromagnetic interference when wireless transmitters such as smartphones and Wi-Fi devices are placed in close proximity to other electronic devices.

This product is a small, lightweight, high-gain antenna used in these standards that covers a wide bandwidth and has good radiation characteristics. Since it can be used in the wide band from 5GHz to 8GHz, it can be used to perform proximity radiation immunity testing assuming wireless LAN in the 6GHz band (up to 7.125GHz).

• A real-time diagnostic tool supports EMC/EMI debugging. 
• Fast visualize EMC/EMI problems. 
• Enables easy comparison of countermeasures before and after. 
• Capable of measurement from entire products to single components. 
• Factor-editor function provides correction of antenna characteristics, cable loss and preamplifier. 
• User friendly compact design. 
• Customer supplied spectrum and probes acceptable (Please consult)

EMC test equipment to evaluate the resistibility of electronic devices and components when energy charged on a human body or object is discharged to the electronic devices and components. NoiseKen brand ESD simulator is available to see malfunctions or function declines of electronic equipment for appropriate evaluations compliant with IEC 61000-4-2 Ed.2 Test Standard, ISO 10605 Ed.2 Test Standard & ISO 10605 Ed.3 Test Standard. 

The ESS-S3011A features a function which enables the user to pre-program test settings to minimize setup errors as well as having the unit be incorporated into a remote or autonomous testing setup. Another feature that sets apart NoiseKen ESD guns to that of competitors is the discharging gun separation design which helps achieve the lightweight. 

For conventional ESD guns, that have generators that are inseparable from the gun, you may experience having to replace the whole unit even only when certain parts of the unit are broken. However, with the NoiseKen’s separation design, replacement parts can be minimized to lower the running cost.

The ESD voltage meter MODEL: 18-00086B is a device that can measure the voltageholding time (holding voltage after 5 seconds) and output

specifications during the air discharge test in IEC 61000-4-2.The measured voltage is displayed on a 7-segment LED with peak and holding voltage values.

• Easily measure the Hold Time, the tester specification for air-discharge testing.
• Measure the output voltage from ±2kV to 30kV.
• Monitor the measured voltage waveform by connecting to an oscilloscope.
• Compact, lightweight and easy to carry.

• IEC 61000-4-4 Ed.3 standard compliance. 
• Pre-check function is installed. Inspection before testing is now easy. 
• Normal mode test support. Taking account of field troubles is possible. (option) 
• Utilize an outlet box that simplifies EUT connection. (option) 
• Compared with conventional products, the size has become compact. (Approximately 67% by volume) 
• Easy to understand Panel display reduces mistakes in connecting power cables. 
• Software control with Windows. (option) 
• Next calibration date can be notified. (Windows software only) 
• Employ LCD screen with multi-language support and enhanced operability. 
• Maximum output voltage of 5 kV and maximum pulse frequency of 2 MHz allow you to test above the standard test level. 
• CDN capacity is increased to single phase type AC 240 V 20 A, single and three phase type to AC 600 V 63 A, supporting wider range of EUT. 
• Large capacity CDN (100 A or 150 A) option available for Injection test on various EUT. 
• Using coupling clamps, EMS probe kits, you can test the signal lines and evaluate the noise immunity on the PCB. (option)

Reproduces transient voltage surge phenomena generated in a vehicle and evaluates the immune resistibility of DUT against the surge. The output waveforms are five as high-repeating pulse, giant pulse, field decay pulse, trapezoidal waveform + high-repeating pulse and high repeating pulse + giant pulse.

This model is for carrying out a high pressure noise test of individual automotive manufacturers' demands. It simulates representative high voltage noise of HV and EV.

• Single-phase 3 wire 
• AC85 - 240V16A 
• 50/60Hz 
• DC125V16A 
• Pulse: ~ 500V 50kHz (option)