Absolute EMC - Transient Generator
See "Specifications & Details" tab for more information.
|
Dips-Interrupts-Variations Test System 30kVA (43A) & 50kVA (75A) + 1 & 3-Phase |
|---|
|
Turnkey EMC test solution — ready to use with full hardware and software integration |
|
Fast voltage transitions (<5 µs) for full compliance with critical standards |
|
Covers all major IEC/EN 61000-4-X tests including -11, -13, -14, -27, -28, -34 |
|
User-friendly ACSControl software with built-in test libraries and reporting |
|
Modular, scalable power platform from 30 kVA up to 2000+ kVA |
|
Versatile use beyond EMC: ideal for grid simulation, anti-islanding, and inverter testing |
|
Compact 19" rack-mounted units — easy system integration and footprint optimization |
|
Certified for global compliance (CE, UKCA, RoHS, EN/IEC EMC and safety standards) |
|
The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane. |
|
The ESD Test Table Kit is a simple inexpensive solution for your ESD testing. Complies to the requirements of IEC 61000-4-2 and can be used for additional standards. Comes with a Horizontal Coupling Plane (HCP), resistive cable to tie HCP to floor ground plane, bleeder wire for discharging ungrounded battery powered EUTs, 0.05mm insulator and an alternative low impedance ground for using the table for additional setups such as IEC 61000-4-6 requirements. |
|
Low-profile 12'×10' floor plane with matching vertical wall (up to 12'×10') in galvanized steel. |
|
Staggered two-layer floor design: wide metal-to-metal overlap, ultra-low impedance, almost zero step height. |
|
Fast install (1–2 days) with full bonding/continuity verification to the building ground or a shielded room. |
|
Engineered to meet IEC 61000, CISPR, and MIL-STD-461 ground-plane requirements. |
|
Custom sizes/materials (steel, aluminum, copper), edge ramps, LISN pads, and cable trenches available. |
|
Delivers repeatable EMC/ESD results by minimizing loop impedance and stray coupling paths. |
|
ECAT LTS, Indirect Lightening system DO-160/MIL-STD LV3,4, or 5 |
|---|
|
ECAT Lightning Test System (L TS) I s a modular test platform which tests the lightning simulator requirements of RTCA DO-160. Sections 22, and 17 The system is expandable to meet MILSTD-461G-CS117, Boeing. Airbus, EUROCAE and other avionic standards. |
|
Safe / Quick Test Set-up |
|
Simple user interface |
|
Waveforms. 1, 2, 3, 4, 5A, 5B, 6, & voltage spikes |
|
Levels 1, 2, 3, 4, and 5+ |
|
Single Stroke, Multiple Stroke, Multiple Burst and Pin Injections from the same front panel |
|
Modular architecture |
|
Voltage spikes |
More Product Information
- High Power Density: Up to 15 kW in 3U, 30 kW in a 6U chassis
- Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
- Fast Load Transient Response: Protection from undesired voltage excursions
- Low Ripple and Noise
- Intuitive Touch Screen Display
- Parallelable up to 150 kW
- Sequencing: Free system controller & speed up test
- Low audible noise: Temperature controlled variable speed fans
- All-in-one smart module: no separate electronics
- Runs directly from USB adapter
- USB, I2C or SPI interface
- Small size: less than 29 x 20 x 10 mm
- High resolution: 0.5 μm
- Absolute encoding: no homing
- Long stroke: 6 mm
- Low power use: 3.3 V DC input, < 0.75 W when moving
- High repeatability and low runout
Description: Phosphate Ester Compliant (Skydrol), 50 GPM, 3000PSI, 75HP, 480VAC, 3PH, 60Hz Electric Motor, Pressure Comped, Positive Displacement Pump, 3 Micron Absolute Filter, Air to Oil Heat Exchanger, 100 Gal. SS Reservoir, 5-50 Flow Motor., 0-5000 PSI Gauges, Pump Pressure Control
Quantity in Stock: 1
- 2000 Vrms input
- 6000 Vpeak transients
- Up to 500 MHz bandwidth
- Ideal for Surge/EFT testing
High voltage single-ended passive probes are suitable for a wide range of applications where ground-referenced high-voltage measurements must be made safely and accurately. There is also a sense pin to automatically configure the oscilloscope for use with the probe.
A precise measurement tool for a wide range of signals, such as NTP, IRIG B, 1PPS, ASCII against an internal precision GPS-controlled oscillator.
- Measures and displays the difference between input time signal and UTC
- Capable of measuring a wide variety of time signal inputs
- Timing resolution of better than 1 nanosecond
- Absolute accuracy of up to 50 nanoseconds to UTC
- Automatic identification and analysis of Modulated Carrier Timecodes
- Full color touch-screen with user-friendly Windows-based operating system
- USB port on front panel for easy access downloads for subsequent analysis of data
- Robust, portable design for all industrial applications
- Input available for measurement of relay opening/closing
- User-selectable threshold for alarm generation
- Robust, portable design for all industrial applications
Absolute EMC
Absolute EMC LLC is a premier North American provider of electromagnetic compatibility (EMC) expertise and test equipment. They deliver end to end consulting—covering IEC, MIL STD, CISPR, and automotive standards—hands on training for all EMC and RF test instruments, and turnkey test system design and integration. Leveraging decades of experience with every major manufacturer and the latest technologies, they also offer strategic guidance on equipment selection, market trends, and procurement to help you maximize the performance and ROI of your EMC investments.
Contact Details
Absolute EMC LLC
8240 Rugby Road, Manassas Park VA 20111, USA
Phone: 585-924-4450
Email: info@absolute-emc.com
Test & Measurement
Download Line Card
